Museum Entrance Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mine & Quarry Engineering - Main Index
Mine & Quarry Engineering - Subject Index
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

Title Prev Page Return to Index Next Page Title
 
 Mine & Quarry Engineering December, 1953 

Drilling

Because of the after-treatment of the anhydrite during processing in the works, it is essential that the mined product be kept quite dry. All drilling is therefore done dry, producing much dust in the case of percussive drills. However, systematic X-rays of miners for the past 15 years have proved this dust to be harmless. The amount of dust liberated when drilling dry with percussive machines has been one of the major factors in encouraging the development in rotary drilling with tungsten carbide hits.

Old Working Areas

Excavation of the loader levels is by a heading-and-bench system, in which the heading is driven 8-9 ft. high and carried 9 ft. ahead of the bench; the cross-cuts are taken out 18 ft. wide and 9 ft. high, being stoped later in two lifts to full-seam height. This will be seen from Fig. 6.

Two Holman SL 10A machines, with slides arranged for 4 ft. steel changes, are mounted on 3 in. vertical columns in the headings while for the bench, a 4½ in. horizontal bar is employed. Holman Golden Arrow auto-twist stopers are used in the cross-cuts for drilling off the two top lifts.

New Working Areas

Although it is intended to change over in the future to rotary drilling from mobile carriages (probably a six-wheeled diesel chassis identical to a standardised similar chassis for all future diesel trucks), at the present time all drilling for production in the new section is done with Holman SL 10A compressed-air machines mounted on various types of carriages. Some of these mountings were primarily designed for use as scaler's or shotfirer's carriages, but have been adapted for use with drills.

After extensive research into the most economic depth of round to be taken per face blast, a 10-ft. pull, giving approximately 300 tons of rock, was accepted as standard; this figure fits in well with both drilling and loading cycles.

At a drill speed of 14-18 in. per min., 150 ft. of drilling per man shift is achieved, and this compares favourably with 72 ft. from the column-bar mounted drills in the old working areas. A Cr-Mo-Va solid-shanked, collared steel, with a six-star bit is universally used, and about 150 ft. are drilled per sharpening.

A steel-sharpening shop is located on surface and good facilities are available, in the form of a Climax diesel oil-fired furnace, and both Holman and Climax drill sharpeners for dressing the drill steels, which are supplied in 6, 8, 10 and 12 ft. runs for the pneumatic drills. All steel used is of 1 in. hexagonal section.

Experiments are in progress with tungsten-carbide tipped steels, both the chisel and the four-star bits being tested; these have been supplied by the Halifax Tool Co. Ltd., Halifax. The steel-sharpening shop is equipped for regrinding these tungsten-carbide steels.

Carriages for drilling, scaling, and shotfiring

There are three basic types of carriage in use at the present, one of which is electric-powered, one a diesel-engined four-wheeled chassis, and one a diesel-driven tracked vehicle.

The electric carriage has a three-wheeled chassis, with a single drive wheel mounted at the rear, and was manufactured by Jones, Tate and Co. Ltd. of Bradford, England. Two carriages of this type were delivered in 1949 and are still in use underground. The rig shown in Fig. 8, having a platform mounted on a single boom, may be used for either scaling or drilling. In this instance, one driller operates from the platform while the other works at ground level. Drills are fitted with Holman aluminium-alloy cradles, enabling two runs of steel per 10 ft. hole.

The second Tate carriage is in use for drilling only, and having no platform mounts instead two Holman specially extended hydraulic booms. As both drillers have to remain on the ground in this case, Joy longfeed (15 ft.) slides are used permitting a 10 ft. hole to be drilled with a 12 ft. steel in one run. Because it is obviously inefficient to keep lowering the boom holding the machine engaged on the upper holes, a 60-hole round (as illustrated in Fig. 7) was devised, and this requires only two set-up alterations in the direction of the upper drill per round. i.e., a horizontal cut is formed automatically as the boom is lowered in stages for each round without spanner work on the saucer clamp.

The vehicle seen on page 432 and in Fig. 9, is used as a scaler's carriage, and the temporary structure added to the platform for mounting pneumatic drills may be seen. Powered by a Perkins P4 diesel engine developing 94 b.h.p. at 1,500 r.p.m., this machine, mounting the hydraulically elevated Jumbo crane, is manufactured by F. Taylor and Sons of Manchester, England. It is understood that a four-wheel drive version of this vehicle is now being developed by the makers, and, in this form, it will most probably become the final standardised mount for both scaling and shotfiring carriages. When used as a drill rig two Holman SL 10A machines, on Holman lightalloy 6 ft. 4 in. cradles, are mounted.

The third form of carriage in use is illustrated in Fig. 10, shown being employed in its role of shotfiring. Readers may remember that a full description of this particular machine was given in our May 1952 issue. Assembled by F. Taylor and Sons, it incorporates Ruston-Bucyrus tracks with the Jumbo crane jib; power is supplied by a Perkins P4 diesel engine. Six foot four inch slide-mounted drills are used on the platform version of this carriage, while a second vehicle mounts twin Holman extended booms, with 15ft. long slides made at Billingham. The overall length of the caterpillar track is 11 ft. 9 in., and width 9 ft. 10 in. Maximum speed forward is 1.25 m.p.h., and 1.02 m.p.h. in reverse. The vehicle has a turning circle of approximately 25 ft., and weighs 10 tons 12 cwt. unladen.

Yet a further adaptation of this carriage is shown in Figs. 12 and 13 in use as a scaler's carriage. A three-part hinged jib (hydraulically controlled) mounted on a turntable permits the scalers to work 20 ft. ahead of the muckpile when the boom is swung 180 degrees from the engine.

This tracked chassis is also being used at present for the research work that is being conducted in connection with rotary drilling. Mention should be made of the Joy T2 hydro-jib drillrig, which, although not used for production drilling in the new working areas, finds many uses underground for drivages of 13 ft. height only.

(To be continued)

Drawings and Photographs accompanying the article

 

Prev Page Return to Top of Page Next Page

Article reproduced from a copy of the magazine held at National Mining Museum Scotland, Newtongrange, Midlothian.

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 17 Jan 2023

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print