| Sample |
Description |
| Scaling operations in progress on a 20 ft. roof. The pneumatic-tyred diesel vehicle shown mounts a hydraulically-elevated Jumbo crane which may be controlled from either the platform or driving position |
| Fig. 1 — Geological section showing strata and Main Anhydrite seam |
| Fig. 2 — Plan view of No. 1 shaft showing layout of compartments |
| Fig. 3 — In the "new" working areas, a Euclid truck is shown being loaded by a Joy loader |
| Fig. 4 — Plan view of the workings showing, on the right, those worked by the "old" method of working, and, on the left, those worked by the new trackless mining method |
| Fig. 5 — View of the back in an area that has been roof-bolted |
| Fig. 6 — Drilling layout for the top-heading and bench method of mining used in the "lold" working areas |
| Fig. 7 — Layout of standard round for drill carriages not equipped with platforms |
| Fig. 8 — The Tate three-wheeled electric carriage mounting two Holman percussive drills shown in use at a face |
| Fig. 9 — Another view of the wheeled Jumbo crane with the platform lowered |
| Fig. 10 — The tracked chassis mounting the Jumbo crane is seen in its role of a mobile carriage for the shotfiring crew |
| Fig. 11 — The tracked chassis mounting twin bomm on which the long drill slides may be noted |
| Fig. 12 — The long reach obtained with the hinged jib of this carriage, enabling the scaling crew to work over the blasted rockpile, may be seen from this illustration |
| Fig. 13 — Another view of the tracked carriage for scaling showing the rear-mounted diesel engine |