Museum Entrance Museum Entrance Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Coke and Gas - Main Index
Coke and Gas - Subject Index
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

Title Prev Page Return to Index Next Page Title
 
 Coke and Gas August, 1959 

The Coking Plant

The Woodall-Duckham coke-oven installation, which commenced operating in November 1958, comprises two batteries of 25 W-D Becker Combination Underjet coke-ovens, but the layout of the plant is such that in the future a third battery can be added at the free end of the bunker.

Included in the installation is a comprehensive coal crushing and blending plant with storage capacity for 3,200 tons and facilities for producing the desired blend from the high- and low-volatile coals available. The coke handling and screening plant produces six grades of coke and incorporates coke-cutting machinery and provision for road and rail loading. Facilities are provided for the stocking and reclaiming of coal and coke. The byproduct recovery plant is of the indirect type, in which the gas is cooled and washed for the recovery of tar and ammoniacal liquor. In addition there is a concentrated ammoniacal liquor plant, a crude benzole plant, a producer gas dilution plant, gas compressing equipment, and provision for water cooling and recirculation. The electrical installation comprises two sub-stations complete with high- and low-tension switchgear and transforming, distribution and control gear.

Coal handling, blending and crushing

From the coal preparation and washery plant the coal, ½ in. to 0, or 1 in. to 0 size, is delivered to the blending and storage bunkers at the rate of 250 tons an hour. The bunkers are of reinforced concrete and are arranged in a single line of eight compartments, each having a capacity of 400 tons. Above the bunkers a reinforced concrete head house accommodates a reversible shuttle belt conveyor (A) (see Fig. 3) which receives the coal from the washery and delivers it into the bunkers as required. At the bottom of each bunker there is a hopper outlet provided with a rack and pinion operated door through which coal is discharged on to a travelling constant-weight belt feeder beneath. There are four constant-weight feeders, each capable of handling from 15 to 80 tons of coal an hour and delivering it at a predetermined rate on to a 30-in, belt conveyor (B) beneath.

Provision is made for blended coal reclaimed from store to be discharged by vehicles into an underground hopper at one end of the blending bunkers. The coal from the hopper is discharged on to a vibrating feeder which delivers it to a 30-in, belt conveyor (G) which in turn feeds on to belt conveyor (B). Conveyor (G) is fitted with a belt weigher.

Coke breeze can also be delivered on to belt conveyor (B) from the breeze crushing and handling plant located adjacent to the blending bunkers. The breeze is fed from rail wagons into an underground track hopper and thence by a vibrating feeder to an 18-in. belt conveyor (H). This conveyor elevates the breeze to a rod mill where it is finally crushed and then discharged on to an 18-in, belt conveyor (M) delivering to belt conveyor (B). The breeze crushing plant is capable of handling 3½ tons of breeze an hour but suitable provision has been allowed for its capacity to be increased to 8 to 10 tons an hour in the future.

The blended coal on belt conveyor (B) is passed to the coal crusher house and there fed on to a 72-in. flat belt conveyor (C) delivering into the British Jeffrey-Diamond crusher. The crusher is a swing hammer pulveriser, direct driven by an electric motor through a flexible coupling, and is capable of reducing the coal so that 80 per cent passes through a 1/8-in. square mesh screen at the rate of 200 tons an hour. Provision is made for a second crusher to be installed in the future.

Crushed blended coal is discharged on to a 42-in. belt conveyor (D), which alternatively receives uncrushed coal from a bypass chute provided at the crushers. Conveyor (D) terminates at a combined transfer station and vehicle loading hopper where a system of flygates and chutes delivers either crushed coal to a 30-in, belt conveyor (E) or uncrushed coal to the hopper beneath. This hopper has a capacity of 50 tons and is a loading point for vehicles carrying coal to open store. From belt conveyor (E) the coal is discharged on to a 30-in, belt conveyor (F) from which it is distributed into the ovens coal bunker.

From the blending bunkers onwards right up to the ovens bunker the coal handling plant has a capacity of 200 tons an hour and its entire operation is controlled from a central desk which is located beneath the blending bunkers, and which will be described later in this article.

Ovens coal bunker. The ovens coal bunker is of reinforced concrete construction approximately 138 ft. high, and it has a total capacity of 2,200 tons of washed crushed coal. There is a separate compartment of 700 tons which can be used as a test compartment if required. Twelve pneumatically operated discharge gates are connected in rows of four to a bay, and these are operated from the coal charging car. An interlock between the charging car travel and the pneumatic opening gear ensures that the discharge gates cannot remain open or be opened after the car has moved away.

Oven charging. The coal charging car is of the portal type with an elevated main frame allowing a clear passage between its hoppers for the operatives. The car is electrically propelled and runs on rails on top of the battery. It has four steel hoppers having a total capacity of approximately 17 tons of coal. Each hopper is fitted with an adjustable measuring device and an electrically operated vibrator to facilitate discharging. At the bottom of each hopper there is a cast-iron outlet piece fitted with a quadrant gate which can be individually operated by a hand lever in the operator's cabin. Below each gate there is a mild-steel telescopic dropping sleeve which can be raised or lowered by lever operation in the operator's cabin and can be operated independently of the quadrant gates. Hand levers are also provided so that the dropping sleeves can be raised individually from the battery top level and they are interlocked with the travelling gear so that the car cannot be driven with the sleeves down.

A weighbridge of 60 tons capacity is provided for weighing the coal in the car before charging and it is fitted with a dial indicator and recorder with press button operation.

An electrically operated self-landing and delivery hoist is installed at the ovens coal bunker for elevating coal withdrawn in the levelling operation and returning it to the coal charging car. It is provided with a detachable bucket of 1 ton capacity and the lifting operation is controlled from a platform elevated above the top of the batteries.

The Oven Batteries

The ovens are arranged in two separate batteries of 25 ovens each, built in line, with the coal storage bunker at one end and the stack at the opposite end. The ovens are of the W-D Becker Combination Underjet type each being 40 ft. 9¾ in. long between the doors, 13 ft. high and having an average width of 18 ins. The capacity of each oven is 735 cu. ft. and the batteries are designed to carbonise daily 1,000 tons of coal containing 9 per cent moisture.

The ovens are designed for heating either by coke oven gas when the underjet system is employed, or alternatively by producer gas if the producer gas mains are added in the future.

The oven brickwork consists of first quality silica from the pad upwards excepting only the filling of the regenerators, the oven soles and the end walls adjacent to the pinion walls. The construction of the oven walls, known as the 'Hammer Head' type of construction, and particularly the form of bonding adopted at the ends of the oven, ensures freedom from leakage with a consequent long life for the oven. The regenerator facings and oven tops are insulated, the latter having a finish of paving bricks.

The regenerator filling consists of specially designed fireclay blocks having a large surface area for heat exchange between the waste gas and the air or producer gas. The use of these blocks enables a highly efficient but small regenerator to be built. A feature of the design is the recess in the bottom of each block which, when they are in position in the regenerator, form a series of unobstructed tunnels running from front to back of the regenerator. Any dust deposited by the producer gas can thus be detected and removed by a compressed air lance without difficulty. Removable brick plugs are provided in the regenerator bulkhead walls for this purpose.

The fuel gas piping and the underjet firing controls are located in the spacious basement below the battery structure which is supported on reinforced concrete beams and columns.

The pinion wall at each end of each battery is constructed of brick with a steel grillage and is supported independently of the concrete pad.

The battery bracing consists of spring controlled rigid steel members the springs of which can be adjusted to a predetermined pressure.

The waste gas flues are of reinforced concrete, lined with firebrick and are built along each side of the battery to connect to the stack at the end of the battery. In the main flue connection to the ovens stack is located the automatic regulating damper to control the stack draught. The stack is 234 ft. high and is firebrick-lined for the first 70 ft. above the waste gas flue inlet.

The oven doors are of the clay luted design and when in position ensure complete freedom of leakage.

Heating system. The heating system consists of a series of vertical flues on each side of each oven connected by cross-over flues over the top of alternate ovens. Beneath each series of vertical flues and connected to them are two regenerators. Each regenerator is divided by a central division wall into two sections of half oven length.

Coke-oven gas heating. When coke-oven gas is used as the heating medium the underjet system is employed and half the regenerators (alternate fours in the length of the battery) are utilised to preheat the air.

The coke-oven gas is fed from the fuel gas main through connections carrying the reversing and isolating valves to alternate pairs of cross header pipes in the basement beneath the battery structure. From the cross headers, of which there is one beneath each pair of regenerators, pipe connections lead the gas to the vertical ducts in the wall between the two regenerators. The gas passes up through the vertical ducts to the base of the vertical heating flues where it meets the preheated air and combustion commences. The contour of the flues from the regenerators, up which the preheated air travels, is such that the air and gas meet with a streamline effect and the burning gas is distributed throughout the length of each vertical flue and even heating of the ovens is obtained. Combustion takes place along the entire length of an oven wall simultaneously.

The products of combustion are collected from each group of vertical flues and carried over the top of the oven by means of cross-over flues. There are eight cross-over flues to each alternate oven, none being required for the intermediate ovens. From the crossover flues the waste gases are distributed into and pass down the vertical flues on the other side of the oven exactly opposite the flues up which they have travelled. The waste gases then travel down from the vertical flues into the two regenerators beneath, through which they pass into the waste gas flues, giving up heat in transit. The air for combustion is preheated in its passage up and through the regenerators which it enters at the bottom and at both ends of the oven simultaneously. Half of the regenerators (alternate fours in the length of the battery) are utilised to preheat the air.

Upon reversal of the valves, which is automatically controlled and occurs at 30 minute intervals, the coke oven fuel gas is fed through the alternative pairs of cross header pipes and vertical ducts and the air passes through the regenerators down which the waste gas had passed previously.

The outstanding features of the heating system are the simplicity of the gas flow, the cross-over flues which carry the products of combustion over the top of the oven and the absence of leakage.

All of the flues on one side of an oven have gases flowing in one direction and the flow in the regenerator below is in the same direction. The velocity of the gases is low, hence there is a low-pressure differential and absence of leakage. The air flows in an upward direction through the whole length of the regenerator and in the same direction as the combustion gases in the vertical combustion flues above. The waste gases are flowing in a similar manner in a downward direction on the opposite side of the oven.

To compensate for the increased oven width on the coke side the calibrated nipple in each fuel gas pipe connection leading to the vertical ducts is increased in area and the air ports at the bottom of the vertical combustion flues are increased in width throughout the length of the oven. This graduation of orifice and port width ensures that the whole of the charge is evenly carbonised. Particular attention has been paid to the design of the connections to the vertical ducts so that all pipes can be cleaned readily.

Producer gas heating. When producer gas is used as the heating medium in the future, the regenerators will be utilised to preheat both the producer gas and the air.

The producer gas and the air enter the bottom of their respective regenerators at both sides and at the same time. After being preheated in their passage through the regenerators, the gas and air pass through specially designed ports and meet at the bottom of the vertical flues where combustion commences.

From the point of combustion onwards the flow of burning gas and waste gas is similar to that described for coke oven gas with the exception that the regenerators preheat both the producer gas and the air.

The design of the regenerators is such that a regenerator preheating air is always positioned between the regenerator through which the producer gas is passing and that through which the waste gas is passing. Consequently there is no possibility of the producer gas leaking into the waste gas regenerator.

Battery control. The battery control room is situated at bench level at the ovens coal bunker end of the battery. The reversing machine, which operates the fuel gas cocks and the air and waste heat valves, is placed in this room and is provided with totally enclosed gearing running in oil. Normally operated by an electric motor, the machine is also provided with a steam engine standby which can be used in case of a failure of power. The movements of the reversing machine are controlled by an electric clock which can be set to operate the machine at various time intervals. An emergency push button control is provided. Should the clock fail to operate the reversing machine at the predetermined time an alarm is automatically sounded.

Coke pushing. When carbonisation is complete the coke is discharged by the pusher machine into a coke quenching car. The pusher machine is a combined machine which travels the length of the batteries, levels the charge of coal in the oven, removes and replaces the oven doors on the pusher side and pushes the charge of hot coke out of the oven. It is of very robust construction, weighing some 96 tons, and runs on substantial track rails laid on a reinforced concrete foundation.

Pushing is controlled by the W-D Gamma Interlock system* which is described in detail later.

The pushing ram is built of structural steel with a cast-steel head with manganese-steel side wearing plates and a cast-steel supporting shoe. It is rack and pinion driven. The leveller bar is of structural steel and is driven by wire rope. The door extractor ram is rack and pinion operated. Separate electric motors are provided for each of the operations, namely — travelling, coal levelling, door hook engagement, door extraction and coke pushing.

A spare pusher ram and leveller bar are kept at a ram changing station situated at the chimney end of the battery.

Coke discharging. The hot coke discharged from the oven is received in a coke quenching car which has ample capacity to hold a complete discharge from one oven. The body of the quenching car is of steel and is approximately 40 ft. long between the end plates. It is mounted on a structural steel undercarriage having two four-wheeled bogies for running on a standard gauge track. The floor of the sloping bottom and the end frames of the car are lined with cast-iron plates of special analysis to withstand sudden temperature changes. There are two side discharge doors of cast steel, extending the full length of the car, each of which is separately operated by a compressed air cylinder controlled from the electric locomotive cabin.

A four wheeled coupled electric locomotive is used to haul the quenching car; it is designed to travel at 10 miles an hour. It is fitted with an electrically driven air compressor and air reservoirs for the operation of the coke quenching car discharge doors and the brakes of the locomotive and quenching car.

An electrically operated door extracting machine with trailing coke guide is provided to remove and replace the doors on the coke side of the ovens, and to guide and support the hot coke over the coke side platform. Both the machine and the guide are of structural steel and traverse the length of the batteries on rails on the coke side platform. Separate electric motors are provided for travelling, door hook engagement and door extraction.

Clay handling. Two electrically operated clay carriers are provided to carry the luting clay to the ovens and to elevate it at the oven doors. One of these carriers runs on a track on the pusher side of the battery and serves the doors on that side, and the other runs on the door machine and coke guide track on the coke side. For ease of operation and to ensure efficient luting each carrier is fitted with an electrically operated elevator for the operator and the clay boxes. Separate motors are provided for the travelling and hoisting operations, the latter being screw operated and provided with travel limit switches. The clay carriers are equipped with heat shields so arranged that they can be adjusted for the protection of the operator when the carriers are used as platforms for inspection purposes or cleaning door jambs.

Coke quenching. The coke quenching car, with its load of hot coke, is pushed to the quenching station where a predetermined quantity of water is sprayed on to the coke to quench it.

The quenching station is of the recirculation type with a reinforced concrete, brick panelled windshield and a timber tower rising 110 ft. above rail level. A 10,000 gallons overhead tank supplies the quenching water to a series of special sprays through a hydraulically operated quick-opening valve controlled automatically by the coke quenching car as it enters the station.

Two electrically operated centrifugal quenching water pumps deliver water from the pump sump to the quenching tank. Each pump has a capacity of 36,500 gallons an hour and one acts as a standby to the other. They are operated automatically by a float in the overhead quenching tank. The pumps are located in a concrete well built below ground level to provide a flooded suction. A brick house is built over the well.

A breeze hoist and grab travelling on an overhead track recovers breeze from the settling sump and delivers it direct into rail wagons. The lifting and travelling motions are electrically operated from a control cabin.

* 'A new interlocking system for coke-oven battery machines employing a radioactive isotope', by Dr J. Zawels. Coke and Gas, December 1957, pages 512-516.

Drawings and Photographs accompanying the article

 

Prev Page Return to Top of Page Next Page

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print