39 Because the affected district was sealed off difficulties were presented in the investigation of the causes and circumstances attending the incident. It was not possible to carry out the usual underground inspections and scientific examinations or to collect for analysis a large number of samples of the materials affected by the explosion. Therefore, evidence had to be obtained from a greater number of witnesses than is normally the case in such investigations.
40 The Safety in Mines Research Establishment examined the clothing and personal effects recovered from the victims, the opened and sealed self-rescuers recovered from the incident area and the flame lamps and electric cap lamps used by the deceased. Examination and tests were also made on samples of dust collected from the clothing, lamps, self-rescuers and first aid containers worn by the victims. Similar examinations were made of two samples of cable and two samples of material taking from the Meltonfield intake roadway outbye E 21's conveyor drift prior to the completion of the seals.
41 Tests were carried out on a Carter Howden bifurcated radial flow 50 hp fan from the same manufacturing batch as that used for the ventilation of B 05's return development heading. The tests were designed to simulate the conditions of motor alignment which were thought to exist at B 05's auxiliary fan before the explosion. (See Plan 6).
42 Analyses of the possible distribution of firedamp in B 05's return heading, B 04's district, B 02's district and E 21's district were made from the information obtained from statutory ventilation records, the seam plans, assumed roadway cross-sections and accepted mathematical treatments of firedamp mixing and migration. A model of B 05's return development heading and B 04's maingate was constructed to illustrate a possible pattern of flame spread after firedamp was ignited at the outbye end of the exhaust ventilation ducting with a high firedamp concentration in the unventilated B 05's return development heading. No attempt was made to make a quantitive analysis from the model experiment. A list of papers prepared by the Safety in Mines Research Establishment is given in Appendix III.