Museum Entrance Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mine & Quarry Engineering - Main Index
Mine & Quarry Engineering - Subject Index
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

Title Prev Page Return to Index Next Page Title
 
Masthead
September, 1960

Stainton Quarry — Part 2

The concluding part of this article* on the limestone quarrying operations of Barrow Quarries Limited at Stainton-in-Furness, contains details on the treatment plant

The material brought by the Foden dump trucks from the quarry face is discharged into a reception hopper at the crushing plant where it is controlled by a chain feeder manufactured by Ross Engineers Limited, of Surbiton, Surrey. This unit feeds the material directly into the primary crusher, and consists of eight heavy steel chains revolving on an upper shaft that is driven through reduction gearing by an English Electric 10½ h.p. motor running at 725 r.p.m.

To indicate when the crusher is ready to receive more stone (and to prevent overloading the hopper) green and red signal lights are positioned adjacent to the primary crushing house. These lights are arranged so that they are visible from the driver's cab when the vehicle is in the tipping position. They are operated by the crusher attendant who can observe all the various phases of the operation. An electric bell is also placed beside the signal lights. This is used to indicate when blasting or other work is being carried out in the hopper, to clear blockages or reduce oversize boulders.

The primary crusher is a Vickers-Armstrongs swing jaw breaker having a feed opening of 56 in. by 30 in. and is required at the quarry to handle stone at the rate of about 100 tons an hour. The machine is, however, capable of handling a substantially greater tonnage, the output for a 6 in. setting being approximately 175 tons an hour with a sustained and regular feed of 24 in. cube material and under.

The machine is driven through 11 V-belts at 152 r.p.m., by a 150 h.p. English Electric slip-ring induction motor that operates at 588 r.p.m. ; it is served by a Tecalemit centralised lubrication system. The main frame of cast steel is of heavy boxed and ribbed construction, the four sections being registered and secured by heavy mild steel tie bolts. The swing jaw and pitman are also of cast steel, the latter being carried on a forged steel eccentric shaft and mounted on a water-cooled bearing.

The jaw faces and cheek plates are of manganese steel supplied in sections to simplify renewal, and are secured by forged steel bolts. A heavy cast iron flywheel and flywheel pulley are fitted to the pitman shaft which runs in white metal lined, water cooled bearings.

This machine was manufactured by Vickers-Armstrongs Engineers Limited, of Barrow-in-Furness, Lancashire, who have introduced numerous improvements to their jaw crusher designs since this machine was manufactured and supplied nearly 20 years ago. Fed with run-of-quarry stone from the hopper, the crusher delivers a 7 in. (approximately) product on to the primary conveyor. This is a troughed belt 30 in. wide, 152 ft. in length and inclined at 18 deg., and is driven through reduction gearing by a 41 b.h.p. English Electric induction motor.

The primary conveyor discharges, via a chute, into a 21 ft. by 6 ft. diameter cylindrical screen which grades the material into four fractions -3 in.; -5in. +3in., -9 in. +5in., and +9 in. oversize. This trommel screen is driven through a reduction gear unit made by Crofts Engineers Limited, of Bradford, Yorkshire, by a 25 h.p. English Electric motor.

The +9 in. product from the screen is delivered by chute into a Vickers-Armstrongs roll crusher located directly below. The 9 in. +5 in. size is discharged through a two-way chute either into the roll crusher or on to a 24 in. conveyor belt. This is arranged in two sections, each at an angle of 14 deg. and powered through reduction gear units by 7½ h.p. English Electric motors. These conveyors take the stone to the 120 ton capacity kiln stone hopper.

The -5 in. +3 in. material from the rotary screen is passed either on to a 30 in. dirt conveyor or to a Niagara D7A double-deck vibrating screen. The dirt belt has a total length of 105 ft. of which part is inclined at 18 deg., and it is powered by a 7½ h.p. Crompton Parkinson motor. The belt takes material to a 20 ton capacity dirt hopper from which it is transported by lorry to the waste tip in the Devonshire Quarry.

The bottom deck of the D7A screen provides an undersize of -5/8 in. which is admitted to the dirt conveyor, while the oversize of -1¼ in. +5/8 in. may be routed through a two-way chute either on to the dirt conveyor or to a 30 in. conveyor that feeds a D9 Niagara screen. The oversize from the upper deck is also delivered on to this 30 in. conveyor.

As previously mentioned, the -9 in. +5 in. grade from the cylindrical screen is delivered either to the kiln stone hopper or to the roll crusher. This crusher has 44 in. diameter by 36 in. wide geared crushing rolls and was constructed with cast steel frames and side plates. The roller shells are of manganese steel while the design also includes forged steel shafts, grease lubricated bearings with phosphor bronze steps and renewable manganese steel cheek plates. The rolls are driven at 18.35 r.p.m. through reduction gearing and V-belts by a 125 h.p., 730 r.p.m. English Electric slip-ring induction motor.

The roll crusher delivers a -5 in. product on to the 30 in. conveyor belt which takes it to the D9 vibrating double-deck Niagara screen together with the -5 in. +3 in. material from the cylindrical screen and the -5 in. +1¼ in. from the D7A screen, as well as the -1¼ in. +5/8 in. material from this latter screen when required. The D9 provides a top deck oversize of -5 in. +1½ in. delivering it into a 120 ton furnace stone hopper. The -1½ in. +5/8 in. middling fraction passes via a two-way chute either into the furnace stone hopper or into a screenings hopper of similar capacity. The undersize, at -5/8 in., is also delivered into the screenings hopper.

The contents of the furnace stone hopper can be discharged through hand-operated gates either into railway wagons or lorries. It can also be passed by chute on to a vibrating feeder that delivers stone into a Parker type R.C. No. 3 crusher set to give a -2 in. product. This is discharged into a hopper from which it is removed by a Parker 18 in. bucket elevator having 50 ft. centres.

As indicated in the flowsheet shown as Fig. 20 the elevator delivers directly on to a three-deck 6 ft. by 3 ft. vibrating screen manufactured by Pegson Limited, of Coalville, Leicestershire, and powered by a 5 h.p. motor. This unit sizes the material into -3/16 in., -¾ in. +3/16 in., -1½ in. +¾ in., and +1½ in. The last three grades are dropped directly into 120 ton capacity hoppers while the first size is fed to a single-deck 6 ft. by 3 ft. Pegson screen. This gives an undersize of -1/8 in. and an oversize of -3/16 in. +1/8 in., both of which are passed into hoppers located underneath.

All the smaller fractions except the +1½ in. can be discharged, together with the material from the screenings hopper if required, on to a horizontal 24 in. conveyor belt. This belt delivers the aggregates to a feeder that supplies an oil-fired, single drum rotary drier 35 ft. long by 5 ft. diameter.

Stone from the drier is taken by an 18 in. conveyor inclined at 18 deg., a distance of 127 ft. 6 in. to the grinding plant where it discharges into a hopper. From this storage bin material is fed into a Vickers-Armstrongs size F ball mill which is belt-driven by a 45 h.p. English Electric motor. The mill has a rated performance of approximately 2 tons per hour to 50 per cent. through a 200 mesh sieve, when fed with -1 in. The product is delivered into a hopper beneath, which has two discharge points in the base for bag filling. The bags are filled on two weighing machines of type P1271, made by H. Pooley and Son Limited, of Birmingham, and capable of weighing accurately up to 300 lb. This ground product is loaded manually to rail wagon or lorry.

Material from the top hopper can also be fed through chutes into two 24 in. by 24 in. pulverisers made by Christy and Norris Limited of Chelmsford, Essex. One of these machines is driven by an 80 h.p. Crompton Parkinson motor while the other is powered by a 63 h.p. English Electric motor; pulleys using 12 V-belts are fitted in each case.

The ground material is taken from the pulverisers by an enclosed screw conveyor which feeds an enclosed chain elevator. This delivers into another enclosed screw conveyor that discharges through five points in the top of a 33 ft. long by 10 ft. diameter storage hopper. This is fitted with seven hand-controlled discharge points, three of which are in use for lorry loading. A further discharge point comprises a screw elevator delivering material to the other side of the building for bulk loading into rail wagons.

* The first part of this article was published in our August, 1960 issue, pp. 318-325.

Drawings and Photographs accompanying the article

 

Prev Page Return to Top of Page Next Page

Article reproduced from a copy of the magazine held at National Mining Museum Scotland, Newtongrange, Midlothian.

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 17 Jan 2023

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print