Museum Entrance Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mine & Quarry Engineering - Main Index
Mine & Quarry Engineering - Subject Index
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

Title Prev Page Return to Index Next Page Title
 
 Mine & Quarry Engineering October, 1956 

Breaking ground

Compressed-air-powered percussive machines mounted on standard long airlegs are used for production drilling, two types, both manufactured by Holman Bros. Ltd., being employed. Of these, one is the Silver Three Handril, which has been found to give, with an air pressure of 70 lb. per sq. in. at the machine, a drilling speed of 12-14 in. per min. in this anhydrite. However, all drilling has to be done dry and large quantities of dust are created at the face. Although these dust clouds contain no harmful elements from a respiratory viewpoint, they make for unpleasant working conditions and necessitate the use of dust masks by all personnel. To overcome this problem, Dryductor machines have been installed and are proving most satisfactory in eliminating the dust, but the drilling rate has been found to be between 5 and 10 per cent, slower than with the Silver Three. However, tests are proceeding with the Dryductor using a rifle bar of different pitch and it is hoped that this modification will bring up the drilling speed in this stone to a similar or even better figure. Dust-free operation of the Dryductor drill* is obtained by drawing down the hole between the drill rod and the walls of the hole a stream of air which conveys the cuttings through the hollow rod, the body of the drill, and flexible hose to a collecting container.

With both the Silver Three and Dryductor machines the mine authorities prefer to use hexagonal rods and detachable tungsten-carbide insert single chisel type bits, no advantage having been found in using the more expensive cruciform-type bits. An average beading round contains 38 holes of 1½ in. diameter, the cut holes being drilled 10 ft. deep and the remainder approximately 9 ft. 3 in. Two lengths of steel are used, comprising a 6 ft. starter and a 10 ft. A double wedge cut has been adopted after much experimental drilling. Three men-two drillers and an assistant- and two machines are allotted to each working face and this crew can drill off a 20 ft. by 12 ft. heading during one shift, producing approximately 180 tons of stone. Such a round is loaded with approximately 120 lb. of 1½ in. diameter Polar Ammon Gelignite explosive, sand stemming in paper cartridges being used to complete the charging of each hole. The detonators used are of the electric milli-second delay type ranging from 0 to 6. Firing is initiated by means of a Beethoven condenser exploder.

Further research is being directed into reducing the cost and increasing the efficiency of the drilling section of the production cycle. The present round adopted is illustrated in Fig. 7 and it will be noted that all holes are drilled between floor level and a height of 8 ft., except the back holes which are put in from the top of the broken rock pile. This layout has been adopted to ensure that all holes are reached conveniently and drilled accurately by the average driller using an airleg-mounted machine. If this height of 8 ft. above the floor is exceeded, it has been found that in certain cases the holes tend to incline upwards, creating an excessive burden on the ends of them and resulting in a poor blast. Thus with the standard round now used a certain amount of large stone is inevitably created and this has to be accepted as long as airlegs are used as mounts for the drills. However, research is being undertaken with Silver Three or Dryductor machines mounted on 10-ft. light-alloy cradles on hydraulic booms carried on a crawler-tracked chassis. If successful and eventually used on production, a change of round design would be one of the advantages accruing. In addition it would make possible an increase in the excavated height of the seam and production per acre, and reduce the number of steels needed for each machine.

For some time experimental work has been proceeding underground on electric rotary drilling, and the management hope that it will be possible to eventually develop this technique to be an economic proposition at this mine.

Loading and haulage

For loading and removing all the anhydrite broken at the working faces, Eimco 621 E electrically powered crawler-track mounted overthrowing shovels are employed with rubber-tyred diesel dump trucks. Five of these loaders are in use and they comprise the first installation of this type of machine at an operating property in the United Kingdom.

The 621 E loader is a comparatively new and more powerful version of the air-operated 621 Rockershovel, which has been described in the pages of an earlier issue of this journal.** Both machines are very similar dimensionally, but due to the weight of the electric motors and control gear fitted, the 621 E is heavier and weighs approximately 8,600 lb. Three electric motors, equipped with windings having glass insulation and treated with silicone varnish, provide the power for operating all movements of the machine. On the lower deck there is one motor driving each track through a worm reduction in an enclosed gearbox at the rear. These are squirrel-cage motors especially made by Brush Electrical Engineering Co. Ltd., and developing 9¼ b.h.p. at 960 r.p.m. The upperdeck motor is of similar design, but is larger to provide a powerful digging action; in fact it is strong enough to lift the rear of the machine well clear of the ground if the bucket is locked at ground level. To hold the full bucket in the carrying position, the upperdeck motor, which develops 12½ b.h.p. at 750 r.p.m., is fitted with an internal expanding brake. This is spring loaded so that it is normally engaged, and is taken off when the motor is under power.

The machine is controlled by 15 General Electric slow-make-and-break switches, six of which operate each of the lower-deck motors, and three the non-reversing upper-deck prime mover. In addition there is a G.E.C. isolator switch controlling the main power supply, which is brought to the machine at 400440 V through a trailing cable manufactured by British Insulated Callender's Cables Limited.

The 621 E is supplied with a ½ cu. yd. bucket. Buckets fitted with digging teeth have been used, but, as they give no special advantage at this particular operation, are no longer employed. The machine is driven into the broken stone until either the tracks spin or the motors stall, the full bucket being lifted while the forward pressure is maintained in the usual way. In a complete loading cycle, a dumper is filled with approximately 3 tons in 2-2½ min., requiring some 12 bucket loads. The time taken to drive out a full dump truck and replace it at the loader with an empty one has been reduced to between and ½ min. Thus one loader operator using two 621 E machines achieves a production that averages 240 tons per shift and at times reaches 300. Each loader performs 4 hours continuous duty, the first being employed from the start of the shift until the meal break, and the second for the remainder of the shift while the motors of the first are allowed to cool. The loader may be moved rapidly between headings, the flitting speed being 2 m.p.h. A further use to which these Eimco units may be put is in the final cleaning-up of the faces and drifts as bulldozing attachments are available for fixing to that end of the loader opposite to the bucket.

Two types of diesel-driven rubber-tyred dump truck are in use for the transport of stone underground, both being Muir-Hill models manufactured by E. Boydell and Co. Ltd. Of these, the smaller unit is the 3 cu. yd. model 10B, which has a gravity tip and a body shape that is well suited to receiving rock from the 621 E rockershovel. The height from ground level to the tip of the receiving skip is 5 ft. 6 in. and the vehicle has a 6 ft. 8½ in. wheelbase. A 3.6 litre four-cylinder diesel engine developing 42 b.h.p. at 1,750 r.p.m. is fitted to this model.

The larger haulage vehicle in use is the 4½ cu. yd. model 14B***, which is powered by a 4.7 litre six cylinder diesel engine developing 60 b.h.p. at 1,800 r.p.m. The body on this unit is tipped by two single-acting telescopic rams and the wheelbase is 7 ft. 5¾ in.

Both these types of dumper are equipped with reversible driving seat and steering arrangements and their engines have water scrubbers fitted to the exhaust systems. These remove the aldehydes from the burnt gases and good engine maintenance ensures that no noxious fumes enter the atmosphere. By these means, together with adequate ventilation of the working faces, it is possible to operate diesel engines underground with no inconvenience or danger to mine personnel.

For cleaning up any spillage from the dumpers, and fly-rock from face blasts, as well as for grading and maintaining the main haulage roads underground, there is available an International Harvester BTD-6 Drott skid shovel. This machine**** is fitted with a 7/8 cu. yd. heavy-duty bucket and the 50 b.h.p. diesel engine has been equipped with an exhaust scrubber similar to those on the dumpers and which was made up on the property.

The haulage vehicles, as indeed all the mobile mechanical equipment in the mine, are serviced and maintained from underground workshops facilities. Bays are provided off the main drifts where the fitting and repair staff can carry out major overhauls on plant requiring attention.

(To be concluded)

* "Short Dryductor Drill," Mine & Quarry Engineering, Vol. 21, No. 3, March, 1955, p. 124.
** "Track-mounted Rocker Shovel," Mine & Quarry Engineering, Vol. 19, No. 12, December, 1953, p. 466.
*** "Hydraulic Tipping Dumper," Mine & Quarry Engineering, Vol. 21, April, 1955, p. 171.
**** "A 50 h.p. BTD-6 Tractor," Mine & Quarry Engineering, Vol. 21, No. 8, August, 1955, p. 342.

Drawings and Photographs accompanying the article

 

Prev Page Return to Top of Page Next Page

Article reproduced from a copy of the magazine held at National Mining Museum Scotland, Newtongrange, Midlothian.

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 17 Jan 2023

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print