Some methods of working coal make it necessary for conveyor and machines to work close up to the face. Obviously this would be impossible if there were a row of props running along the face and set close to the coal. Some method has therefore got to be found of supporting the roof at the coal face without having a line of props in the area in which the conveyor or the machine has to operate. In many cases, this problem is solved by using cantilever bars, a typical arrangement of which is shown in Figure 43.
These same methods of working very often necessitate the use of special types of props. All of these props have this in common — they are designed to yield slowly as the roof lowers so that the danger of damage to the prop is removed. They are adjustable to suit variations in seam thickness, and they can be easily and rapidly set and withdrawn.
The success with which these yielding props support the roof depends to a very great extent on the care taken in the initial setting. No general rules can be laid down for this operation; each type of yielding prop is set in a particular way, and there are special setting instructions to be followed in each case.