Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
Items for sale
Items for Sale
e-Books
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

E-Book Prev Page Return to Index Next Page E-Book
/ Index \

Chapter IV.

WELDING — THE HAMMER, SQUEEZER, AND ROUGHING AND FINISHING ROLLS. ROLLING BOLTS, SHEET IRON, BARS, ETC. MARKET NAMES OF BAR IRON. BOILER PLATES, SHIP-BUILDING PLATES, NAILS, RODS, HOOPS, CIRCULAR SAWS — DIMENSIONS AND VELOCITY. DEVICES AND TRADE MARKS ON IRON BARS.

Welding — The Hammer, Squeezer, And Roughing And Finishing Rolls.

Wrought Iron is distinguished from other metals by the facility with which two or more pieces may be united together and retain unimpaired their tenacity. The property of Welding on the infusion of heat belongs to all metals, whether cast or malleable; but is most apparent in Iron. It is produced by the infusion of caloric until the Iron and metalloids of the entire mass are softened, and the surfaces to be united reduced to a semi-liquid state. The comparatively large quantity required to liquify wrought Iron, enables the softening and partial fusion to be successfully conducted. The Hammer used in compressing the balls formed in the puddling process, is made of cast iron, about 10 feet long, the weight of the helve being about 3½ or 4 tons. The head is of wrought iron faced with steel; the pane of the hammer, as well as that of the anvil, is formed into a series of grooves for the purpose of better nipping and compressing the ball. The head is rated by steam or water power, and makes from 75 to 100 blows per minute. Hammered Iron is more homogenous, has a greater specific gravity, and is superior in point of strength; in the manufacture of the best qualities, this operation should never be omitted. The Squeezer, which sometimes takes the place of the hammer, consists of two powerful jaws, united as in a pair of shears; the meeting faces of the jaws are furrowed with numerous grooves in order to hold fast the bloom. The lower jaw is hollow to allow a current of water to flow through it to keep it cool. Nasmyth's Steam Hammer has also been applied in this portion of the process. As soon as the slag is pressed out of the bloom, and while it is still at a red heat, it is passed between cylinders or rolls, which serve to compress and weld together the metallic particles, and get rid of the last portions of the slag, and to draw out the Iron into bars. Two sets of rolls are usually employed, the one called Roughing Rolls, which prepare the Iron for the Finishing Rolls, the latter being differently grooved according to the section intended to be given to the bar. The rolls are mounted one above the other in pairs in a massive iron frame-work connected by heavy couplings tightly screwed together. Motion is communicated by strong toothed wheels made to turn either way, and the distance between the rolls is regulated by screws attached to the bearings in which the trunnions work. The bearers are connected at the upper part by stout iron bars, which are used to support the heavy tongs used in lifting the blooms. Below the roller frame is a channel through which a stream of water flows, and in it is collected the scale which falls from the surface of the heated Iron while passing through the rolls; and a stream of water is made to play from a small pipe upon each pair of rolls to keep them cool. The whole arrangement rests upon a massive foundation of timber, masonry, and cast iron. The roughing rolls are about 5 feet in the clear between the bearers, and 18 inches diameter. Each of these rollers has a series of from 5 to 7 regularly decreasing grooves of an elliptical form, so arranged that the shorter axis of the figure formed by the meeting of the corresponding grooves in the two cylinders is equal to the longer axis of the ellipse formed by the junction of the two grooves which come next in succession. The smaller axis of each ellipse is also invariably perpendicular to the surface of the two cylinders, by the meetings of which it is formed; and for this reason every bar which has passed between the rollers is made to describe a quarter revolution before it enters the grooves which come next in the series, and is thus equally compressed and drawn out in all its parts.

The roughing and preparing grooves are usually arranged on distinct rollers ; the metal being formed into bars, are afterwards cut up by the shears, formed into faggots, welded together, then drawn into bars of the required section. The first three or four grooves of the roughing rolls are roughened with teeth to cause the Iron to pass through without slipping; and on a level with the bottom of the notches on the lower roll is a thick plate of cast iron, called an apron, for supporting the balls or masses of Iron which are to be passed through the rollers. The Iron produced in this way is hard and brittle, and subject to flaws and imperfections. It is well adapted to railway bars, which are prepared by passing the bloom of puddled Iron through rollers having fiat and edge grooves alternately, which is probably the most expeditious mode of rolling that can be adopted. Good bar Iron is, however, prepared by a separate process. The bars from the roughing rolls are first cut up into short lengths by the shears, to which are firmly bolted cutting edges of hardened steel; and bars of an inch or more in thickness are easily divided by the jaws. A number of the short lengths thus produced are piled or faggotted together in a reverberatory furnace, which differs from the puddling furnace in having a larger grate in proportion to the hearth, a more intense heat being required. It is important to preserve the faggots from the oxidizing influence of the air, so that no air is allowed to get to them, except that which has passed through the grate. When the faggots have attained the proper welding heat, they are taken out one at a time and thrown to the men at the finishing rolls, who pass them through the grooves as rapidly as possible, so as to get the required section and dimensions before the bar has cooled below the proper temperature for drawing.

Large bolts are rolled with rolls having grooves approaching a semi-circular section sunk on the surface; at the bottom they are curved to the radius of the hot bar, which they are intended to produce; at the surface of the roll the width is augmented from 1-8th to 1-16th of the diameter of the bar, the horizontal distension of the grooves being nearly similar to that in rolls for square and gothic bars, and is greater or less according to the rapidity of production. The rolling of bolts, of a large size with present appliances is probably the most laborious operation connected with the rolling of Iron.

 

Prev Page Return to Top of Page Next Page

Please Note: These web pages retain the original pagination from the publication

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z