Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
Items for sale
Items for Sale
e-Books
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

E-Book Prev Page Return to Index Next Page E-Book
/ Index \

A man with a rake should stand opposite to the charger, to spread as equally as may be each charge, so that the mixture of the materials may be rendered tolerably perfect, the care to observe which cannot fail to be discovered in the steady working condition of the furnace, and more especially so in that above described of the contracted cylindrical figure, down which the charges, as laid on and arranged, will be likely to pass. The gasses — heavier than atmospheric air — cannot discharge themselves, and the compressed blast, being mainly spent, is not sufficiently strong to carry them down to the floor of the furnace and apply them usefully; but a chimney some 150 ft. high will effect the purpose; or where a furnace stands against a bank, the surface of which is on a level with its top, and their application may be suitably made there, a drawing stack of half the height will be sufficient."

From the quantity of nitrogen contained in the gases, it is found necessary for their combustion, that they should be supplied with an artificial current of atmospheric air, and also that this should be brought in contact with the vapours to be consumed at a very elevated temperature. In order to cool and purify the gases drawn form the cavity of the furnace, they are usually passed through water; and air pumps are frequently employed to force them towards the point where they are afterwards to be used as fuel. This gas, when once ignited, burns with the development of a very intense heat, so much so as to rapidly destroy the linings of the furnace in which it is employed, unless special means be adopted to prevent the production of a too elevated local temperature. The heat thus obtained has been applied to the generation of steam for working the blowing apparatus, to the roasting of the ores, and also to the refining and puddling furnaces. The application of this self supplied agent has not, however, found such general favour in this country as might have been anticipated. Though a saving has been effected in the consumption of Coal by the application of the gases to the engine boilers and hot blast stoves in many Iron making districts, yet it is not enough that there be a saving, if that saving is insufficient to compensate for the greater outlay of applying the principle of heating with gas. The heating power, it is contended, is inferior, and consequently a larger number of boilers are required. At the Ebbw Yale, Aberyschan, Sirhowy, Aberdare, Ystalyfera, and other works using the gases, the number of boilers now in use is nearly twice the number which formerly sufficed with Coal fires only. The available heating power of the gases is greatly below the theoretical calculations of the chemist; if it was equal, or superior, the boiler surface formerly employed would have been amply sufficient. In regard to the saving at the engine boilers, the utility of collecting the gases is said to be questionable, considering the extra expenditure of capital; for the outlay in boilers, piping, and other erections, averages at the least £1,000 per furnace.

Refining And Puddling.

The production of wrought Iron direct from the ore, the original mode of manufacturing, has engaged the attention of numerous practical and scientific men, and is practised to a limited extent abroad. Mr. Eaton, in his Survey of the Turkish Empire, published in 1801, gives the following circumstance as having occurred to his own knowledge :— "An Arabian of Constantinople had discovered the secret of casting Iron, which, when it came out of the mould, was as malleable as hammered Iron. Some of his fabrication was accidentally shown to M. de Gaffron, the Prussian Charge d' Affaires, and M. Franzaroli (men of mineralogical science), who were struck with the fact, and immediately instituted an inquiry for its author. This man, whose art in Christendom would have ensured him a splendid fortune, had died poor and unknown, and his secret had perished with him. His utensils were found, and several pieces of his casting, all perfectly malleable! M. Frauzaroli analysed them, and found that there was no admixture of any other metal. M. de Gaffron has since been made superintendent of the Iron manufactory at Spandau, where he in vain attempted to discover the process of the Arabian." The attempts, however, to produce wrought Iron direct from the ore in this country have hitherto been unsuccessful, commercially speaking; and, though the ores and fuels we possess are unquestionably superior to the foreign for the purpose, fusion in the blast furnace, and conversion into malleable iron by the puddling process is pursued with all the bar Iron now manufactured.

The cast or pig Iron, produced by the operations which have been thus far described, is contaminated with impurities, which render it brittle, and incapable of being wrought into shape by the hammer; and the next process to which it is subject is called Refining. The method of Refining pig Iron consists of two consecutive operations, carried on in separate furnaces, In the first, which is called the Fining Furnace, or the Refinery, the metal is melted, and after being exposed to the blast of numerous tuyeres, accumulates in the bottom of the crucible, whence it is run off into a flat mould. By this operation it loses a considerable portion of the carbon, and nearly all the silicium, becomes very hard and brittle, and its surface covered with small blisters similar to some of the varieties of steel. In this state it is called Fine Metal. It is broken up and transferred to what is called a Puddling Furnace, in which the operation of decarbonisation is completed.

The Refinery is usually built on a mass of brick work, about 9 feet square, and the hearth, 2½ feet wide and 3½ feet long, is raised only a small height above the level of the floor. It is formed by the junction of four cast iron troughs, through which a stream of cold water is made to circulate, to prevent them from being fused by the heat. The bottom of the crucible is of grit stone, or argillaceous sand, and is slightly inclined in the direction of the tapping hole. The air, which is supplied by blowing cylinders, enters the hearth through six tuyeres, which are inclined at an angle of from 25° to 30°, and so arranged that the blast from each may be directed towards the face of the opposite side of the furnace, not in opposition to the opposite tuyere. The tuyeres are furnished with double casings, through which cold water is constantly running. A supply of water is brought by a pipe into the reservoirs whence it passes to the tuyeres, through the pipes, and escapes through the tubes into the tanks, in to which the water from the iron troughs flows by the syphon tubes. A furnace of this kind consumes about 400 cubic feet of air per minute. This is supplied by pipes, which are furnished with screw valves for regulating the supply. Above the hearth is a chimney 16 to 18 feet high, supported by four cast iron columns, so as to allow free access to the fire on all sides. The tapping hole is placed in one of the shorter sides of the hearth, and by it the melted metal and the slag flow out into a mould, where the metal is cooled by quenching with water.

 

Prev Page Return to Top of Page Next Page

Please Note: These web pages retain the original pagination from the publication

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z