Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
Items for sale
Items for Sale
e-Books
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

E-Book Prev Page Return to Index Next Page E-Book
/ Index \

Employment Of Waste Heat

.

Since the application of the hot blast to Iron furnaces, various attempts have at different times been made to employ the waste heat escaping from the throat of the apparatus for the purpose of heating the air with which it is supplied. The importance of such an adaptation will be readily understood when we consider that in Scotland, where anthracite is chiefly employed, some of the largest furnaces yield from 150 to 200 tons of Iron per week, and consume weekly from 300 to 400 tons of Coals for its production. These furnaces receive as blast from 4,000 to 5,000 cubic feet of air per minute, and constantly vomit forth immense volumes of smoke and flame, which pass uselessly into the atmosphere. The best method adopted in this country, by which advantage is taken of the heat escaping from the tunnel hole, is that invented by Mr. Budd, and employed by him with the greatest success at the Ystalyfera Iron Works in South Wales. Instead of making the heating apparatus an integral part of the furnace, as formerly adopted, the ovens are in this case so arranged as to allow of their being readily repaired without in the least interfering with the action of the furnaces with which they are connected. Stoves are built into the masonry a little below the level of the throats of the various furnaces which they are intended to supply with hot air, and a chimney, 25 feet higher than the top of the platform, affords the means of drawing into them as much of the heated air and flame as may be required. These are carried from the furnace by means of a series of flues, placed about 3 feet below the top, and communicating with the hot air chamber, in which are placed arched pipes, heated by the gases issuing from the furnace. The chimney and its damper regulate the heat of the stove. Cross pipes connect together the upright air tubes, and the side pipes convey the blast arriving by the upcast mains to the various cross pipes. The heated air is afterwards conveyed to the tuyeres by downcast pipes; a door is also placed in the brick work of the building for the purpose of cooling the apparatus before entering it to make any repairs. With this arrangement it becomes extremely easy to regulate the temperature to which the blast is elevated. The gases escaping from the furnace have usually a temperature of about 1800° Fah., and it is therefore necessary to draw, by the aid of the chimney, such a quantity only through the chamber as may be required to heat the air circulating in the tubes to 600°. To do this the gases should pass out of the stove at about 800°, and one-sixth part of the gaseous products issuing from the tunnel head is usually found sufficient to produce the required effect. Should the temperature fall too low, it may be instantly raised by slightly elevating the damper. At the Ystalyfera works another portion of the escaping gases is conducted through proper flues for the purpose of heating the boilers which supply the engine of the Blowing Machine; and even after doing this, a considerable amount still goes off into the air without being applied to any useful purpose. The economy of fuel caused by the arrangement just described, amounts, according to the opinion of several Iron-masters, to about one-third; so that two tons of com bustible produce the same quantity of cast Iron as formerly required the expenditure of three tons for its preparation. The actual quantity of fuel weekly consumed in the furnace to which this modification is applied, is about 100 tons; the weight of metal obtained during the same time varies from 50 to 60 tons.

Heat From The Inflammable Gases.

It has been proved by experiments, that the entire column of gas issuing from an iron furnace is capable of being inflamed even after it is cooled to the ordinary temperature of the air. The first attempt in this country to utilize blast furnace gases by effecting their combustion, appears to have been made by the Ebbw Yale Company; and afterwards an improvement was introduced at the Ystalyfera works. The usual method employed for collecting these gases is by partially closing the mouth of the furnace so as to cause a slight impediment to the escape of the gaseous products, and then drawing them off by means of proper tubes to the situation where it is intended they should be consumed. In order to do this, a cylinder of cast iron, of a smaller diameter than the throat of the furnace, and having a depth equal to its width, is frequently used. This is suspended by means of a strong flange within the tunnel head, and as the mouth of the furnace is constantly kept charged with mineral and fuel, whilst a clear space remains between the iron collar and the lining of the furnace, it is evident that this space must be filled with the gases issuing from the apparatus, and which may be readily conducted by means of flues or iron pipes to any situation where they may be required for combustion. In furnaces built especially with a view to economizing the heat to be obtained by the combustion of the unconsumed gases, the internal iron lining is often replaced by an annular flue made in the brick work a few feet below the throat. This is connected by several arched openings with the interior of the cone, and as the charges thrown into the furnace above this point naturally offer a certain resistance to the exit of the escaping gases, they find their way into the annular flue before described, from whence they are readily drawn off in any direction in which they are required, and may be even conducted to the distance of several hundred feet. The use of the iron cylinder was objected to, in consequence of its not being possible to render it durable, and has been in many instances superseded by the plan of the dish and cone. "But," observes the writer quoted on the subject of the blast furnace, "the only sure and effectual plan, I believe, is to form a throat with brick work of 6 or 8 feet diameter, and 8 feet (though I consider 10 feet would be preferable) in depth, which would contain 10 or 12 charges, and sufficiently seal up the top of the furnace, the flues to take off the gases to be formed immediately below the bottom of the throat, care being always taken that the want of charges should never be lower than the middle, or half-way down it. The dimensions and construction of the furnace to be the same as have already been described, viz. :— The hearth, 5 feet diameter and 5 feet high; the boshes, 2 feet high, and enlarged from 5 to 8 feet diameter; the body, a cylinder 8 feet diameter and 30 feet high; a shoulder 1½ feet high, and drawn in from 8 to 6 feet diameter; throat 8 feet high and 6 feet diameter. To promote beneficially the process of reduction, and to order conveniently the charging of the furnace, the funnel top, under the foregoing arrangements being dispensed with, a close fence of iron plates, 6 or 7 feet in height, should be carried round the outer edge of the gallery to keep off the wind. The top of the furnace being thus well protected, the charging will be carried on comfortably by the workmen, for there will be no flame or heat to incommode them.

 

Prev Page Return to Top of Page Next Page

Please Note: These web pages retain the original pagination from the publication

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z