Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
Items for sale
Items for Sale
e-Books
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

E-Book Prev Page Return to Index Next Page E-Book
/ Index \

carried off by the nitrogen of the injected air, and by the volatilised products; while a third portion is employed by the ore and the flux; so that it is contended by the advocates of the hot blast, not only is there a wasteful expenditure of heat, but the very means employed to raise the temperature of the furnace, has the effect of keeping down the temperature. If, however, the temperature of the air be raised to about 600° before it is injected into the furnace, a much higher temperature can be obtained with the same charge of fuel, or the same temperature with a diminished charge of fuel. It has been calculated that by the use of the blast at 572° instead of 60°, a furnace may have its temperature raised 1-8th; and supposing the temperature obtained by working with cold air to average 2,700°, the hot-blast will raise it to 3,060°, making a difference of 360° in the effective heat of the furnace. Hence many substances infusible in a cold blast furnace, become fusible in a hot. Coal may be used in the hot blast furnace instead of coke, or being mixed with coke; less fuel and less limestone flux are required; and ores previously unfitted for manufacture of foundry Iron can be smelted. — The apparatus for heating the air which supplies the blast, consists of a kind of stove, in which the air is made to pass through a series of cast iron pipes before arriving at the nozzles by which it is injected into the furnace; these, syphon-shaped, are from 6 to 8 inches diameter, and are connected by sockets and iron joints of much greater diameter. The gases from the fire-place below escape into a large hot air chamber, by openings at the crown of the arched covering. The draft is regulated by a damper placed over the top, by which the openings can be more or less closed by moving a compound lever. The large cylinder communicates with the cylinder by which the blast is supplied, and is large enough to neutralize the vibrations occasioned by the oscillation of the piston by which air is forced into the furnace. A horizontal connecting pipe, through which the cold air enters the stove, is furnished with a stop or diaphragm in the middle, and the air, in order to escape by the pipe on the opposite side, must traverse the syphon pipes, the heat of which raises the temperature of the blast to the proper point. In most cases each tuyere is provided with a heating apparatus; and in a furnace producing 60 tons of cast Iron per week, from 30 to 35 tons of Coal will be required in that time for raising the blast to the temperature of 600°.

Elaborate investigations relative to the different chemical changes affecting the production of cast Iron in furnaces worked by hot blast have been made from time to time by able chemists. Gas taken from about 6 feet from the bottom of the crucible, arid 2 feet 9 inches from the tuyeres, contained 1.34 per cent. of cyanogen; and on examining the gases taken from different depths of a furnace, carburetted hydrogen was considered as an essential constituent, even at a depth of 24 feet from the surface, and consequently that the coking of the combustible was not thoroughly effected even at that distance from the top. It was also further shown that the quantity of nitrogen is least considerable in the gaseous mixture drawn from a depth of 14 feet, whilst at the same distance the amount of hydrogen and carburetted hydrogen is at its maximum, and it was therefore inferred that this was the zone of most active distillation.

Mr. Truran, C.E., in his able work on Iron Manufacture, published in 1855, contends that the saving in fuel and increase of make due to the employment of hot blast is not generally one-fourth of the quantity which writers have asserted. "Were the invention universally applied to blast furnaces in this country," observes Mr. Truran, "instead of to a moiety only, it would be difficult to show the saving due to hot blast, and that due to other improvements; but there are numerous furnaces to which it has never been applied, and the progressive improvement in these will enable us to approximate closely to the actual results. At the Dowlais furnaces, in 1791, the ton of pig Iron was made with the consumption of the following materials :— Coal for coking, 6 tons 6 cwt.; ironstone calcined, 2 tons 18 cwt.; engine Coal, 1 ton 15 cwt.; limestone, 1 ton 8 cwt. Forty years afterwards, namely, 1831, the hot blast having been some months in operation at the Clyde works in Scotland, the Dowlais furnaces were making 1 ton of foundry Iron with the following consumption of materials :— Coal, 2½ tons; ironstone calcined, 2 tons 16 cwt; engine Coal, 10½ cwts.; Coal for kilns, 6½ cwt.; limestone, 18 cwts. From this we learn that the improvements in smelting have been such, that with cold blast a reduction of nearly two-thirds of the quantity of Coal required to smelt a ton of pig Iron has been effected.

"When such results were commonly obtained, before the introduction of hot blast, in one of the largest works in Wales, with furnaces which have been blown with cold air without intermission since their erection, we may fairly conclude that the immense saving of fuel so generally attributed to the use of heated air, is due to other causes over which it has only a slight modifying influence. The use of carbonaceous ore, which melts at a low temperature, and from its comparative freedom from earthy matters, requires but a minimum dose of limestone for fluxing, has enabled the consumption of Coal to be largely reduced; and by enlarging the throat of the furnace, the substitution of raw Coal for Coke was successfully effected, thereby enabling the consumption to be still further reduced. In the Welsh district, cold blast furnaces, when working entirely on carbonaceous ore, smelt with a consumption of fuel no greater than that used in the Scotch furnaces. The hot blast has also been credited as enabling anthracite Coal to be successfully used as a fuel for smelting. The statement has been repeated by nearly every writer, as if the hot blast was more necessary to this Coal than to others, notwithstanding the now well-known fact, that this Coal may advantageously be used in smelting with a cold blast of proper density, and that the Iron so made is greatly superior to that smelted with a heated blast. We award a superior make to the hot blast, but the increase does not usually exceed 12 per cent. In 1791, the average weekly make of each of the Clyde furnaces appears to have been 17 tons; in 1839, with the advantage of a hot blast, but using argillaceous ores, the make was 52 tons weekly. At the Dowlais furnaces, in 1791, the average weekly make was 20 tons; in 1831, it had risen to 80 tons, and in 1839 to 91 tons when working foundry Iron, cold blast being used throughout the whole period.

"The Scotch furnaces using a heated blast, and smelting carbonaceous ores, yielding on an average 60 per cent. of metal, average 146 tons a week. Welsh cold blast furnaces smelting a much leaner and more refractory ore, have averaged quite as much. Several of the cold blast furnaces at the Dowlais works make 170, and have exceeded 190 tons. The furnaces at the Plymouth and Duffryn Works are all cold blast, yet they often exceed 130 tons a week. With these facts then before us, how much of the increase in the make of blast furnaces within the last twenty-five years can fairly be attributed to the hot blast?"

Such are the views entertained upon this subject by the recent engineer of the Dowlais Iron Works, and of the Hirwain and Forest Works; and with such experience, the opinions of Mr. Truran cannot but have weight and consideration with an unprejudiced reader.

 

Prev Page Return to Top of Page Next Page

Please Note: These web pages retain the original pagination from the publication

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z