Lifting The Materials.
The apparatus for Lifting the Materials to the level of the charging plates, where furnaces cannot be erected on hill sides, is wrought by steam, water, or pneumatic power. One of the most common methods of raising the loaded barrows is the inclined plane, which requires an engine of 10 horse power to supply four blast furnaces; but this mode of lifting is rarely adopted in new erections. The water balance is preferred at some furnaces, and at others steam power has been applied to the hoisting of the materials by a vertical lift. But superior to all previous methods, though of recent date, is the pneumatic lifts; they are now in use at several Scotch, English, and Welsh works, and their recommendation consists in the perfect control which the workmen have over its movements, whilst the whole of the apparatus is less subject to accident. At the Corbyn's Hall New Furnaces one pneumatic lift, with a tube about 5½ feet diameter, suffices for four furnaces. The load of materials lifted each time, including barrows and workmen, averages 5,040 lbs., leaving a surplus power of 2,941 lbs. to cover the unbalanced weight of tube and all contingencies. The working cost of lifting the materials with the pneumatic lift is equally great as compared with the other methods; but the expense of repairs and renewals is unquestionably much less. The cost of adopting the pneumatic lift, and raising the materials 50 feet high, is estimated at 3-8th of a penny per ton — that is, 3-16ths of a penny as the cost of compressing the atmospheric air, and 3-16ths of a penny as the cost of erecting and maintaining the apparatus.
Chapter III.
@S
Please Note: These web pages retain the original pagination from the publication