Museum Entrance Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Disaster Report Text
Disaster Report Name Index
UK Disaster Report Text
UK Disaster Report Name Index
Inquest Texts
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

Reports Prev Page Return to Index Next Page Reports
Index


Aldwarke Main Shaft Accident

Extracted from the Annual Mines Inspectors Report for 1904

Report of W. Walker (page 11)

Shaft Accidents.

Ropes or Chains breaking.

Accident No. 23. — This was the most disastrous accident of the year, and occurred on 23rd February at Aldwarke Main Colliery, near Rotherham, belonging to Messrs. John Brown and Company, Limited.

A shaft, known as No. 2 Parkgate Shaft, is exclusively used for raising and lowering persons to the Parkgate inset, 406 yards from the surface. It is an upcast shaft, and an outlet for exhaust steam from hauling engines.

At 5.20 a.m. eight men were being lowered in the top deck of a two-decked cage. When they were about 50 yards from the bottom, the winding rope snapped at a point six yards below the surface, and the cage fell to the bottom of the shaft with 400 yards to rope following. One man was killed on the spot, five died very shortly after being liberated from the bent ironwork of the cage, and two died during the same day in the Rotherham Hospital. The eighth man, Arthur Ramsden, after some months in the hospital, eventually recovered.

The rope was 3½ inches circumference, and made of special improved plough steel by one of the leading firms of rope makers. It was examined at 3 p.m. on the day before the accident by the appointed examiner, and reported to be all right. It had been in use eighteen months. The breaking strain of such a rope should be 56 tons, and the working load some 5½ tons. The weight upon the part of the rope which broke would be 3 tons 7½ cwts.

At 4.45 a m. that day when the ropes were tested with full tubs according to rule, the weight upon the rope would be 4 tons 8 cwts. The engineman, who was an experienced winder, was sending down the third set of men, and stated that at about two revolutions of the drum after reversing his engine the engine stopped, and the ascending cage began to run back owing to loss of weight. He was quite sure he had not previously applied the brake.

Mr. Pickering and Mr. Wilson, one of the assistant inspectors, were at the colliery within a few hours of the accident, and made a careful examination of the damaged rope, and later, of the shaft, which, with wire rope guides, showed, no sign of damage, nor any place where the cage could have caught.

The inquest was opened on the 25th February, 1904, when formal identification took place, and was adjourned until 3rd March, 1904.

The jury did not think there was sufficient evidence to prove why the rope broke, but Mr. Pickering was satisfied that it was due to two causes acting in conjunction, neither of which alone would have been sufficient to cause the accident — (1) The rope was weakened to less than one-third of its original strength by wear and internal corrosion ; (2) the engineman must have put a jerk upon the rope, probably by applying the brake.

Mr. J. E. Stead, F.R.S., an expert on steel testing, calculated by theory that the best parts of the rope after the accident had a breaking strain of 51 tons, and the worst part 25 tons ; but the practical tests made by Mr. Pickering's order at the Sheffield Testing works showed that at the weakest part the breaking strain was 15½ tons, and at the strongest 46 tons.

More reliance must be placed upon the practical test than on the theoretical calculation as regards a worn or corroded rope ; for accurate measurements of the damaged individual wires (in this case 72 in number) are practically impossible.

In Mr. Pickering's examination of the broken ends of the rope, he found that the outside wires were considerably worn, and that some of the internal wires were pointed at the ends. Allowing for some amount of stretching at the moment of fracture, he is of opinion that there had been internal corrosion. It is of the most vital importance that winding ropes should be thoroughly examined periodically in addition to the daily external examination required by General Rule 5 of the Coal Mines Regulation Act, 1887. For this reason the ropes should be recapped once at least every six months ; for this operation necessitates the rope being cut at the end nearest the cage where deterioration or weakening usually begins, and gives an opportunity for the internal condition to be observed.

When a rope is recapped, a length of some feet should be, and usually is cut off, and this changes the lifting point of the rope on the pulley, and prevents specially worn places being formed.

Winding ropes should also be subjected to a periodical caliper or a circumferential test, which discloses the reduction in size due to wear.

Owing to the importance of the enquiry, a summary of the evidence given at the inquest is appended.

 

Prev Page Return to Top of Page Next Page


mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.
Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z