Museum Entrance Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Disaster Report Text
Disaster Report Name Index
UK Disaster Report Text
UK Disaster Report Name Index
Inquest Texts
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

Reports Prev Page Return to Index Next Page Reports
Index

Description Of The Colliery.

Donibristle Colliery is situated in the Parish of Aberdour, and near the Burgh of Cowdenbeath in Fifeshire. It is owned by a private company trading as the Donibristle Colliery Company, the partners of which are Mr. James Armstrong Nasmyth and his son Mr. Alexander Hogg Nasmyth. Both partners hold certificates as managers of mines, and are well acquainted with every detail of the management of collieries. The age of the senior partner precluded him from taking an active part in the affairs of the Company, but the junior partner directed as owner all the main operations of the colliery.

The certificated manager is Mr. Alexander Nasmyth, a nephew of the senior partner.

No under-manager was appointed, although Thomas Rattray the oversman of Nos. 12 and 15 Pits, which included the district in which the accident occurred, held a certificate as under-manager of a mine.

The mineral area leased by the Company lies on the southern edge of the Fife Coal Field ; the seams worked all lie in the Lower or Carboniferous Limestone series of the Carboniferous System of Scotland. The Donibristle coal field is intersected by several large faults. The inclination of the measures is somewhat irregular, but on the whole the rise is to the south, all the seams cropping out in that direction within the limits of the field leased.

A feature of the coalfield is that most of the workings lie under a moss, 450 feet above sea level, a rough square of about 1 mile each way, known as Moss Morran, and consisting of flat moorland, still the home of a few grouse.

It was stated by Mr. Gemmell at the Inquiry that on an old map of Fife, dated 1662, Moss Morran is shown as a sheet of water. The map Mr. Gemmell referred to is Timothy Pont's map of Fife, published at Amsterdam as part of Blaeu's "Atlas" in the year 1662.

Donibristle Colliery has been in operation for many years, and numerous shafts and daylight mines have been in use for working the various seams.

At the time of the accident the following openings from the surface, communicating with the underground workings, were in use

The James Pit To the north
The Marion Pit of the field.
No. 12 Pit These pits were recently sunk deeper from the
No. 15 Pit Mynheer to the Dunfermline Splint, and during
 the sinking were in turn used as a coal winding shaft.
The Fan or Isabella Pit. 
The Day Mine on the Moss. 

There are about 270 persons employed underground at Donibristle Colliery and 80 on the surface.

For the purposes of this report it is only necessary to describe particularly a part of the colliery lying to the east and north of a large fault known as the Moss Morran Dyke, with its approaches from the surface, as shown on Sheet I. accompanying this report.

The Nos. 12 and 15 Pits are sunk to the Dunfermline splint seam at a depth of 97 fathoms, intersecting the Mynheer seam at 77 fathoms. A level in the Mynheer seam extends in an easterly direction from No. 12 Pit for 120 yards, and from this level a stone mine, driven nearly flat for 310 yards, crosses the Moss Morran Dyke, which has here a throw of 20 fathoms up to the east, and catches the Mynheer seam on the rise side.

Levels were driven in the Mynheer seam on each side of the stone mine, and headings from the levels enabled the coal to be worked across the hill on the longwall method. To the north-west the coal was exhausted and the workings are not shown on the plan. To the east the level continued for 540 yards to the working heading and terminated at a large fault a few yards further in. A portion of coal still remained to be extracted near the outcrop and to the rise of the extremity of the level.

From the Mynheer level, inside the Moss Morran Dyke, two stone mines were driven to the Parrot seam, which lies above the Mynheer, intersecting also the Glassee seam. The first stone mine was a continuation of that across the Moss Morran Dyke and was driven level, the second was 227 yards further in, and was driven with an inclination of 1 in 3. The position of these stone mines is shown on Sheet I., but the workings, which were of considerable area in the Parrot seam and less extensive in the Glassee seam, are not shown as the moss did not penetrate to them. The workmen employed in these seams at the time of the accident escaped without difficulty.

It will be observed on Plan I. that to the rise of the first portion of the level extending to the east are workings marked "older workings." These workings had been prosecuted many years ago from a higher level, and were on the stoop and room system. They extended from the level at which they were won to the outcrop, but had not exhausted the coal in an easterly direction, so that the innermost heading of the present workings passed them and was driven in the coal to the outcrop, the outer headings having all terminated on reaching the older workings. It was at the face of the innermost heading that the moss burst in.

Through the older workings was an intake air-way from the surface, which continued as such along the upper roads of the longwall workings to the working faces.

The inclination of the innermost heading was 49 degrees, at which rate the outcrop was soon reached.

On Sheet II. is depicted on a larger scale the actual working places in the Mynheer seam at the time of the accident.

The Mynheer seam is 5 feet 10 inches thick in the vicinity of the burst and is directly overlaid by a blaes or shale roof. The coal was of very good quality ; near the outcrop the backs in the coal were coated with clay. A section of the seam is given on Sheet II.

The coal, as already stated, is worked on the longwall system across the hill ; at intervals of about 10 yards on the slope, levels, directly opposite to each other, leave the heading at right angles on either side. At the working face 14 inches of coal was left on as a roof; but in the heading and levels this was worked, and in addition 2 feet 4 inches of the roof stone was blasted down and built on the low side of the levels, while wood pillars were put in on the rise side.

The heading into which the moss burst did not extend in a direct line to the main level, but was worked as a "cut chain brae"* for a length of 40 yards on the slope to an upper level along which the hutches were taken by hand for 14 yards to a lower heading worked as an ordinary self-acting incline, and 104 yards long on the slope to the main level. The miners and their drawers worked the cut chain brae, and a wheeler named William Forsyth, took the hutches from the bottom of the upper heading along the short upper level to David Rattray, who ran them singly down the second heading, where a bottomer named James Bowman McDonald was stationed, who coupled the hutches in rakes of six, whence they were led to the shaft in three stages by horses.

The air current ventilating the Mynheer, Parrot and Glassee seams, inside the Moss Morran Dyke, entered the mine by the day mine, passed down through the old stoop and room workings, along the upper levels of the longwall workings, and round the faces of the Mynheer seam, down the headings, and then passed along the Mynheer level and into the inside Parrot mine. After passing round the Parrot and Glassee faces it came out by the outer Parrot mine and along the stone mine, across the Moss Morran fault to the upcast shaft, on the top of which is an exhausting fan.

In proceeding to and from their work the miners in the Mynheer seam made use of Nos. 12 or 15 Pits and the roads along which the coal was led; access to the workings was available by the day mine and air-way, but this route was not used by the miners, although the officials made periodical journeys through it.

The Officials who acted in the workings inside the Moss Morran Dyke, under the Manager, were:

Thomas Rattray Oversman.
David Campbell Pit Inspector or Fireman of the Mynheer workings.
Alex. Mitchell Pit Inspector or Fireman of the Parrot and Glassee workings.
James Rattray Roadsman
James Dick Roadsman

Thomas Rattray and David Campbell, who would have been most important witnesses, both lost their lives in the accident.

The heading in the Mynheer seam having reached the outcrop about October, 1900, operations were suspended in it until a few days before the accident.

When the outcrop was reached the question of connecting it with the surface was considered in order to secure—

 (1.) 

A ready means of ingress and egress to and from the workings

 (2.) 

An improvement in the ventilation.

Neither of these reasons was urgent. The miners would certainly have welcomed the new road, as it would relieve them of a toilsome journey underground, including a long climb up the inclines. As regards ventilation it was not proved to be defective, but the new road would have improved it.

Mr. A. H. Nasmyth, the junior partner, Mr. Alex. Nasmyth, the manager, and Thomas Rattray, the oversman, discussed the matter. Mr. A. H. Nasmyth stated at the Inquiry that he then told the manager and oversman that he would not agree to anything being done except on very safe lines, and that the position of the communication on the surface was to be ascertained and tests made to ascertain the thickness of moss, and if it proved thicker than where previous shafts had been sunk through it nothing was to be done. The manager and oversman, after locating the position of the heading face on the surface, probed the moss in November, 1900, by an iron rod 15 or 18 feet long, and found no bottom. The result of this test was not reported to Mr. A. H. Nasmyth, and he concluded that it was unfavourable, and that nothing was to be done. Mr. A. H. Nasmyth further stated that he would not have dreamt of putting the heading up.

The manager stated at the Inquiry that after the tests he told Rattray that it was no use putting a pit there, and that the matter was never again discussed by them.

Previous to the accident the knowledge of the surface deposits appears to have been as follows

 (1.) 

The immediate surface was ordinarily hard moss and heather.

 (2.) 

The sinking of shallow pits on the outcrops of the various seams had shown that soft moss was commonly found below the upper solid crust.

 (3.) 

Underground operations in the Mynheer and other seams, and the sinking of pits, had shown that a bed of sand or sand and gravel lay below the soft moss, separated from it by a bed of closer moss.

 (4.) 

The moss above the Mynheer heading had, as already stated, been probed about November, 1900, by an iron rod, and found to be of considerable thickness and soft, and the bed of sand had been observed above the coal in the heading.

 (5.) 

A flow of moss into the mine had taken place some 40 years ago, unaccompanied by any loss of life, but filling a section of the workings. This inflow took place at a point about 300 yards to the west of the present inflow. In one case a "sit" or subsidence had taken place without any inflow of moss.

* A self-acting incline arranged for the running of hutches of coal from several points on its length.

 

Prev Page Return to Top of Page Next Page


A copy of this report was kindly donated by
West Cumbria Mines Research.

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.
Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z