Museum Entrance Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Disaster Report Text
Disaster Report Name Index
UK Disaster Report Text
UK Disaster Report Name Index
Inquest Texts
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

Reports Prev Page Return to Index Next Page Reports
Index

II. General Information

Knockshinnoch Castle Colliery is situated in the Parish of New Cumnock in the County of Ayr and lies about 22 miles almost due east from the town of Ayr. Before the accident the colliery gave employment to about 600 persons underground and 120 on the surface and had a weekly output of coal varying from 4,500 to 5,000 tons. The output came from two seams, the Main Coal and the Turf Coal, the major portion coming from the Main Coal. The downcast shaft, completed in 1942, was ordinarily used for the winding of men, mineral and material and is 16 feet in diameter and 122 fathoms deep. The older Knockshinnoch No. 1 Pit served as the upcast shaft and also as the second exit. It lies about a quarter of a mile to the north of the downcast shaft and is 12 feet in diameter and 70 fathoms deep.

The ventilation was produced by an Aeroto fan situated at the surface at Knockshinnoch No. 1 pit and passing 65,000 cubic feet per minute with a water-gauge of 4½ inches. Safety lamps were used throughout the mine. The type of lamp provided for general underground use by workmen was the Oldham — Wheat Q type, 4-volt electric cap lamp. For gas testing, the workmen were issued with Prestwich Patent Protector, Type SL, magnetically-locked flame safety lamps, and the officials with Prestwich, Type No. 6, flame safety lamps, fitted with internal re-lighters and magnetic locks. Limestone dust was used for stone-dusting throughout the colliery. At Knockshinnoch Castle downcast shaft an underground pump with a capacity of 125 gallons per minute normally ran from nine to twelve hours per day, while at No. 1 upcast shaft there were two pumps, one with a capacity of 500 gallons per minute which ran for three hours per day, and a second, with a capacity of 125 gallons per minute, which ran for twelve hours per day.

The colliery is operated by the National Coal Board, Scottish Division, and is one of fifty producing collieries, many relatively small, comprised within the Ayr and Dumfries Area. This Area is divided into three Sub-Areas, each of which, in turn, is divided into Groups. Knockshinnoch Castle was the largest of the six collieries in the New Cumnock Group in the Dunaskin Sub-Area, which comprised twenty-one collieries. The Manager of the colliery was Mr. W. C. Halliday, who was assisted by an Under-manager, Mr. B. Y. Kennedy. There was an overman, Mr. J. N. Houston, in general charge underground on the day-shift, and he was followed by a second overman, Mr. Andrew Houston, who was in charge underground on the afternoon shift. There was no overman on the night-shift. Five firemen were in charge of the working districts on each of the three shifts. Mr. J. Bone was the Agent of the New Cumnock Group. The Dunaskin Sub-Area was under the general charge of Mr. A. M. Stewart, the Sub-Area Production Manager, who was, in turn, responsible to Mr. A. B. Macdonald, the Area Production Manager. Mr. D. L. McCardel was the Area General Manager. All of these higher officials held first-class Certificates of Competency.

The Sub-Area had a Planning Department and a Surveying Department.

The Planning Department employed planning engineers and planners. The Sub-Area Planning Engineer was Mr. Alex. Gardner, who held a first-class Certificate of Competency and a Mine Surveyor's Certificate. His Assistant was Mr. Donald Mackinnon, who possessed a first-class Certificate of Competency. The Sub-Area Senior Planner was Mr. J. H. Cairns, who controlled the activities of four Assistant-Planners, one for each Agent's Group of collieries in the Sub-Area. The Assistant-Planner concerned with the Knockshinnoch Castle Colliery was Mr. R. McLean, who held a Mine Surveyor's Certificate. The Sub-area Chief Surveyor was Mr. C. Stewart. His Senior Assistant was Mr. T. D. Brown. The Surveyor attached to the New Cumnock Group was Mr. R. Arbuckle, who was assisted by an apprentice surveyor, Mr. Ian Murray. Messrs. Stewart, Brown and Arbuckle held Mine Surveyors' Certificates.

As several questions at the Inquiry were directed to find out why the working of such a relatively thick coal seam as the Main Coal at Knockshinnoch Castle had begun only in recent years, it is perhaps advisable to refer briefly to the geology of the district and the story of recent developments. The somewhat isolated portion of the Ayrshire Coalfield in the New Cumnock district lies at the extreme southern edge of the coal measures and is bounded on the south by the large upthrow fault known as the Southern Upland Fault. The coalfield is unique among the coalfields of Britain in that workable seams of coal are found in four groups of the rocks of the Carboniferous Period, namely, the Barren Red Measures, True Coal Measures, Millston Grit Series and the Limestone Series. Altogether, twenty-eight seams of coal exceeding two feet in thickness have been proved and, of these, seventeen are over three feet thick and nine exceed four feet. The existence of many of these seams was unknown in the Knockshinnoch Castle Colliery Area until recent years. In particular, the existence of the Main Coal — the seam mainly concerned in this disaster — was doubted for a long time and was only finally proved in 1938.

Apart from its proximity to the major Southern Upland Fault, the New Cumnock coalfield is much disturbed by faulting which has resulted in the field being broken up into more or less detached areas, in some of which coal has been worked for a long number of years. One of the most important seams worked over the years was the locally well-known "Eight Feet". In an older colliery adjacent to the present Knockshinnoch Castle, a thick seam had been worked for several years. It was locally believed to be the Eight Feet and was so named. About 1920, however, the Geological Survey suggested that this seam was not the "Eight Feet", but was an entirely different seam, the geological position of which was about one-hundred fathoms below the "Eight Feet" in the True Coal Measures. To test the theory a borehole was put down in 1924, but the results recorded were disappointing and did nothing to alter local opinion. Some years later the views of the Geological Survey were reconsidered and it was decided that further boring was justified. A borehole was put down in 1938 and gave excellent results. It proved the existence of the Main Coal at the approximate position previously indicated by the geologists of the Survey, as well as that of three other seams of workable thickness. Further boring confirmed the existence of these seams over several square miles, thus adding many million tons of workable coal to the reserves in the area. This valuable extension of the coalfield led very soon to the planning of Knockshinnoch Castle Colliery, and the sinking of the present downcast shaft was begun in 1940 and completed in 1942.

Because of the inclination of the seams and the decision of the previous owners, the New Cumnock Collieries, Ltd., to use locomotive haulage in the main roads leading to the pit bottom, the shaft was not sunk to a particular seam but to a suitable horizon from which almost level mines or stone drifts were driven as main haulage roads to give access to the seams to be worked, especially the Main Coal. In common with the coalfield as a whole, the area of coal to be worked from Knockshinnoch Castle was dislocated by faulting and, due to these disturbances, the gradient of the seams varies from comparatively level up to 1 in 2, and in parts even steeper. In addition, the composition and thickness of the seams were subject to appreciable lateral variation. This was particularly true of the Main Coal Seam which is approximately eight feet thick and comprises three distinct coal beds separated by dirt bands, with either a strong sandstone or a relatively weak "calmstone" forming the immediate roof. When the sandstone formed the immediate roof, the full thickness of the seam was extracted, but when the roof was "calmstone" the top leaf of coal was left on. The seams worked are naturally damp and it was not uncommon for the working places to be wet.

In the district in which the disaster occurred, namely, the No. 5 Heading Section in the South Boig Area, the composition and thickness of the Main Coal remained reasonably constant. Here the seam comprised the three coal beds locally known, respectively, as the "head coal", the "breast coal" and the "bottom coal" separated by dirt bands, with a bed of "calmstone" overlying the "head coal". Above the calmstone was another thin bed of coal known as the Pennyvenie Seam, which was overlain by a bed of sandstone. A representative section of the Main Coal in the No. 5 Heading Section was approximately as follows :—

Sandstone       
Coal (Pennyvenie) 20  inches  
Calmstone  34  "  
Head Coal  23  "  
Dirt Band   9  "| 
Breast Coal  20  "| 
Dirt Band  14  "| Working height.
Bottom Coal  42  "| 
Fireclay   2  "| 
Hard Rock       

The method of working was Stoop and Room, the rooms being driven 16 feet to 18 feet wide to form stoops approximately 100 feet square. The lay-out of the No. 5 Heading Section, which lies to the South of the downcast shaft, is shown in Fig. 1. The direction of advance was to the south-east towards the position of the Southern Upland Fault, with the gradient steepening from tin 14 to 1 in 2 in the No. 5 Heading which was the main haulage road for the district and was the leading place. Because the calmstone was weak and difficult to support, the "head coal" was left on to form the roof of the workings. Thus, in this district, only the "breast coal" and the "bottom coal", together with their associated dirt bands, were extracted, giving a working height of about 7 feet. The coal was blown from the solid by explosives, a practice which was permitted by an exemption granted by the Divisional Inspector under Clause 6 (c) of the Explosives in Coal Mines Order. The shot-holes were bored by electric boring machines, approximately 18 holes being bored for each round of shots. The faces advanced up to 9 feet per shift, two shifts of coal-getters being employed. The coal was hand loaded on to scraper conveyors which delivered on to a series of trunk conveyors, two in the No. 5 Heading and one in the Belt Conveyor Heading. At a central loading point at the junction of this heading with the South Boig Mine, the coal was delivered into tubs which were hauled to the pit bottom by locomotives by way of the South Boig and West Mines (see Fig. 1), both of which had a gradient dipping slightly towards the shaft. In headings going steeply to the rise, e.g., the No. 5 Heading, a short shaker conveyor was used next to the face. For several days before the accident this heading had been stopped and the shaker conveyor partly dismantled.

At the neighbouring Bank No. 6 Colliery, the Main Coal is reached by a dipping drift driven from the surface, mostly in stone but partly in coal, with the gradient varying up to 1 in 3.6. The mouth of this drift lies approximately one mile to the south-west of Knockshinnoch Castle Colliery. About 1944, a district in Bank No. 6, known as the Waterhead Section, was worked to the rise by a longwall conveyor face. Subsequently the Main Coal in Knockshinnoch Castle was also worked in the Waterhead Area towards Bank No. 6, leaving a barrier of coal, 200 feet wide, between the two collieries. In order to facilitate drainage from the Knockshinnoch side, a roadway was driven into this barrier up to a point about 24 feet from the Bank No. 6 workings. A borehole was then put through the remaining part of the barrier to convey the water. It was through this part of the barrier that the escape road was driven, by which 116 of the men imprisoned by the disaster were eventually rescued.

Deposits of peat or moss occur on the surface in the immediate neighbourhood of both Bank No. 6 and Knockshinnoch Castle collieries and they are shown on the 6-inch Geological Survey Map of Ayrshire, Sheet XLII S.W. One such deposit was shown, part of which actually covered the place where the disaster originated. There is no previous history of an inrush of moss in this area. A few years ago, however, work had been carried on underground in Bank Colliery — of which Mr. J. Bone was the Agent at that time — where a surface peat deposit had to be probed to determine its thickness in order to comply with the General Regulations of 1920, relating to the precautions to be taken when working under moss.

 

Prev Page Return to Top of Page Next Page


mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.
Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z