General Description.
The workings of the Pentre Seam, in which the explosion occurred, are shown in Plan 1, from which it will be seen that work was being carried on by long faces, some of them as conveyor faces and others as stalls. The seam is 2 feet 10 inches thick, and the proximate analysis of the coal is

The part of Plan 1 to which attention should be particularly directed in connection with this explosion is that bounded by the roads marked "Cooper," "Randall" and "George Rees."
Several weeks prior to the explosion, George Rees’ road had reached a downthrow fault of some three feet and it then became necessary, in order to recover the seam beyond the fault, to drive that road through the fault. This was done and at the time of the explosion, in order to form a new conveyor face, a heading some 15 feet wide was being driven to the rise and parallel to the fault. The position of this heading (known as George Rees’ conveyor face) in relation to George Rees’ and Randall’s roads, at the time of the explosion, is shown on Plan 2.
This heading was ventilated by a current of air which reached it by way of the airway — marked Squints airway — shown on Plan 2. This air current was prevented from passing out along George Rees’ road by a brattice erected across that road some 50 feet back from the fault, and was conducted to the face of the heading by a brattice dividing the heading into two. On reaching the face, the air current turned round the end of the brattice and continued by way of a spout hole cut through the fault and an airway of somewhat restricted dimensions — at the time of the explosion so restricted that progress through it was on elbows and toes — on to Randall’s.
It will be seen on referring to Plan 1 that the starting point of this air current was the point where the road marked "Joe Davies" had been turned off the road marked Old Camm. Up to that point the ventilating current, which came down No. 1 pit, had not been divided but it was there split into two, the one "split" going by way of "Squints gateroad" and "Squints airway" to ventilate George Rees’ conveyor face and Randall’s; and the other by way of Cooper’s to the outbye end of Randall’s, where the two currents joined and thence continued as one around the remainder of the workings. The means by which this division of the air current was effected were primitive, namely, a brick so placed as to prevent the door on Old Camm’s between Cooper’s and Joe Davies’ from closing.
The coal got in driving the heading known as George Rees’ conveyor face was put on to a compressed air driven conveyor which dumped it on to the floor at the face of George Rees’ road, where it was filled by hand into trains. This method of getting the coal into trains had been in use for some six weeks prior to the explosion. It was a method by which much coal dust would be produced and the dumping and filling point being for so long a time at the same point would cause the surrounding area to be more coal dusty than when a dumping and filling point is moved forward at intervals of one, two or three days, the rippings in the clift above also being carried forward.
A copy of this report was kindly donated by
West Cumbria Mines Research.