V. — Conditions Existing In The Vicinity Of The Ripping Lip In 93's Gateroad.
The conditions existing at, and adjacent to, the ripping lip in 93's gateroad immediately prior to the accident are shown in Figures 1-3, Plate 2. A piece of roof stone, some three feet thick by two feet to two feet three inches deep from front to back, projected into the gateroad for a distance of about three feet. This piece of roof had gradually come down so low as to impede the free egress of loaded tubs from the face, and it became necessary to remove it. Immediately at the back of this stone was the break from which firedamp had been found to be issuing.
When the night shift deputy (John Henry York) met the day shift deputy (Sep. Taylor) in the mine at the beginning of the morning shift on the day of the accident he told him that the packs were bare in 93's benk, that the ripping needed to be got down, and that shots would be required. Taylor thereupon instructed two rippers (George William Clayton and William Moore) to go into 93's gateroad and bore a shot-hole in the left-hand side with a view to making headway for tubs. He also ordered the shotfirer (Arthur Booth) to fire a shot.
Clayton and Moore carried out the instructions given to them; they went into 93's gateroad and bored a shothole in the projecting piece of roof stone. Clayton, in evidence, stated that the depth of the shothole would be 14 or 15 inches and that the distance between the end of it and the break at the back of the projecting stone would be nine inches. Moore, in his evidence, agreed with Clayton's estimate of the depth of the shothole, but gave six or seven inches as the thickness of stone left between the end of the hole and the break.
A copy of this report was kindly donated by
West Cumbria Mines Research.