Museum Entrance Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Disaster Report Text
Disaster Report Name Index
UK Disaster Report Text
UK Disaster Report Name Index
Inquest Texts
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

Reports Prev Page Return to Index Next Page Reports
Index

Report On The Causes Of, And Circumstances Attending, The Explosion Which Occurred At Tower Colliery, Glamorganshire, On 12th April, 1962

14th September, 1962

The Right Honourable Richard Wood, M.P.,

Minister of Power.

Sir,

Introduction

1. In accordance with your direction, given under the terms of Section 121 of the Mines and Quarries Act, 1954, I beg to submit my report on the causes of, and circumstances attending, the explosion which occurred at Tower Colliery, Glamorganshire. on 12th April, 1962, when eight persons were killed, one was fatally injured and nine others sustained serious personal injuries.

2. On 11th May, 1962, Mr. T. Alwyn John, H.M. Coroner for North Glamorgan, sitting with a jury, concluded the holding of an inquest on the bodies of the nine persons. A verdict was recorded that all nine had 'died as a result of multiple injuries accidentally received in an explosion in the MC3 road at Tower Colliery'.

3. My investigations showed that the explosion was caused by a severe short circuit to earth in an electric cable in the presence of a body of inflammable gas.

Description Of Colliery

General

4. Tower Colliery is in the No. 4 Area of the National Coal Board's South Western Division and is situated in the village of Hirwaun some four miles north west of Aberdare. The colliery 'take' is located close to the recognised base of the Lower Coal Measures and is centrally placed along the northern outcrop of the coalfield. Records show that coal was first mined here in the year 1864. The 'take' is traversed by three large faults which naturally divide the mine into three parts. This natural division combined with a scheme of re-organisation and modernisation has resulted in the mine being served by six cross measure drifts from the surface and three vertical shafts. The output of the colliery is some 1,500 tons per day. The number of persons employed underground is 938 and 234 persons are employed on the surface.

5. The ventilation of the mine is produced by two fans. At the No. 1 upcast shaft a Sirocco single inlet fan produces 95,000 cubic feet of air per minute at a water gauge of 4.1 inches while at No. 4 upcast shaft a similar type of fan produces 180,000 cubic feet of air per minute at a water gauge of 2.8 inches.

6. Safety lamps are used throughout the mine. For general lighting purposes Oldham Wheat W type electric cap lamps are used. Senior officials and deputies use Thomas and Williams Cambrian type No. 8 flame safety lamps and Thomas and Williams type No. 1 flame lamps are used as gas detectors by appointed workmen.

7. The coal seams worked during the life of the colliery have been in descending order, Four Feet, Six Feet, Red Vein, Nine Feet, Bute, Seven Feet, and Five Feet. At the time of this explosion the Nine Feet, Seven Feet, and Five Feet seams were being worked.

8. Among the persons who have been given written instructions for securing the National Coal Board's statutory responsibilities at this mine are :—

Mr. T. Wright Area General Manager.
Mr. P. G. Weekes Area Production Manager.
Mr. V. Lewis Deputy Area Production Manager (Operations).
Mr. S. Thomas Deputy Area Production Manager (Planning).
Mr. T. G. Jones Group Manager.

The colliery manager is Mr. T. J. Ryder. There are three undermanagers of whom Mr. C. J. Bell was responsible for the affected area.

9. The only area of the mine affected by this explosion was contained within that part known as 'Tower 4' and served by the No. 3 Drift and the No. 3 New Drift as intake airways and the No. 4 upcast shaft. This area was known as the 'G' panel and the seam worked here was the Nine Feet.

The 'G' Panel

10. 'G' panel was developed following the establishment of a new ventilation circuit of which the No. 3 New Drift formed the main intake with a main return by way of a cross measure drivage to the No. 4 upcast shaft. From these main airways two levels at 30 yards centres were driven narrow on the strike of the seam to the limit line of working some 850 yards inbye. In this area the Nine Feet seam was found to vary little from 7 feet 6 inches in thickness with a strong clift roof and a hard fireclay floor. The volatile matter content of the seam varied between 9.3 and 10.2 per cent.

11. At the time of the explosion there were two working places in the panel. One, to the dip from the levels and worked by a Continuous Miner, is referred to as the 'Miner' heading. This heading was not affected by the explosion. The second working place was developed near to the inbye end of the levels and to the rise. This heading, known as the MC3 heading, was the scene of the explosion.

12. The immediate supervision of the panel was by an overman and a deputy on the morning shift. On the afternoon and night shifts supervision was exercised by deputies with assistance from overmen who also had responsibility for other districts. On each shift there was a shotfirer. A second official with the status of a deputy was also employed in the 'Tower 4' part of the colliery to supervise closely the arrangements for the ventilation of the several narrow drivages.

The MC3 Heading

13. The MC3 heading had been driven at a rising gradient of 1 in 10.5 in the full thickness of the seam for a distance of 328 feet and was 12 feet wide. The coal was won by shotfiring out of the solid and loaded on to a short scraper chain conveyor by means of a Samson MC3 Loader. The chain conveyor delivered on to a belt conveyor down the heading which in turn delivered on to the main gate belt conveyor in the return level. Coal was worked on each of the three shifts.

14. The support in the heading was by straight H section girders, 6 inches by 5 inches, carried on wood props set at the road sides.

15. All the machinery in the heading was electrically driven. The electrical apparatus was supplied from a 300 kVA. 3300/550 volts flameproof transformer in a substation in the 'G' return roadway some 500 yards outbye the MC3 heading. The neutral point of the 550 volts winding was earthed. On the primary side of the transformer there was an oil-immersed circuit breaker which was fitted with time-lagged overload trips set at 50 amperes and an instantaneous earth leakage device connected to a current transformer in the secondary neutral lead and arranged to trip the circuit breaker when a current of 2½ amperes flowed from phase to earth in the 550 volts system.

16. The secondary side of the transformer was connected by means of a short length of 0.15 square inch paper insulated, lead covered, double wire armoured cable to a flameproof air-break section switch in the same substation. This switch was provided with an isolator and a hand operated circuit breaker, and was fitted with thermal overload trips set at 142 amperes, instantaneous short circuit trips arranged to operate at 2,000 amperes and an instantaneous earth leakage device designed to trip when a current of 3½ amperes flowed from phase to earth.

17. The earth leakage devices were designed to trip and lock out mechanically the respective switches on the occurrence of an earth fault on the 550 volts system, and to indicate, by means of a flag visible from outside, that such a fault had occurred. A test button was also provided on each switch so that the correct functioning of the devices could be tested.

18. An 0.04 square inch paper insulated, lead covered, double wire armoured 550 volts feeder cable from the section switch passed inbye along the return roadway to a flameproof gate end switch controlling the 'Miner' heading conveyor. The supply was looped through the busbars of this switch to a cable coupling tee box from which the apparatus in the 'Miner' heading was supplied whilst the cable continued to the MC3 heading. This length of cable was looped through the busbars of a flameproof drill panel, a flameproof gate end switch controlling the auxiliary fan ventilating the MC3 heading, and a flameproof gate end switch controlling the MC3 belt conveyor. Both these switches were situated in the return roadway a few yards from the entrance to the MC3 heading. From the last switch the cable passed up the MC3 heading to two coupled gate end switches placed at a point some 20 yards back from the face of the heading. One of these switches controlled the scraper chain conveyor and the other the MC3 loader. The feeder cable was connected to the inbye end of the busbars of these switches, i.e., it was looped back on itself.

19. The MC3 heading was ventilated by a 16 inches diameter Meco axial flow auxiliary fan forcing air from the intake level through ducting 20 inches diameter. The fan was situated in the connection between the intake and return levels some 12 yards outbye the MC3 heading. The manager had prescribed that a minimum quantity of 2,100 c.f.m. should be delivered at the face.

 

Prev Page Return to Top of Page Next Page


mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.
Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z