Museum Entrance Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Disaster Report Text
Disaster Report Name Index
UK Disaster Report Text
UK Disaster Report Name Index
Inquest Texts
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

  Disasters - Names Return to Index Disasters - Names  
Date:  21st May 1894
Colliery:  Talacre (Metalliferous)
Company:  
Cause:  (See description below)
Lives Lost:  1
Category:  

Description

Accident No. 27. — The unfortunate accident at Talacre Mine was caused by the fall of the guiding frame (rider) of a bucket (kibble) in a sinking shaft. When a depth of 120 yards had been reached the manager decided to put in guides, with the very laudable object of steadying the bucket in its journey up and down, and so increasing the safety of the ascent and descent of the men. Two wire ropes were put in and fixed to beams near the bottom of the shaft, and the rider shown in Figure 1 was prepared and placed upon the ropes.

It was composed of two horizontal pieces of oak, A, B, kept apart by the distance pieces C, D, and provided with three pieces of iron pipe, E, F, G. The wire rope guides, H and I, passed through E and G, and the ordinary winding rope, shown by the centre line only, through F. The guide ropes, which were 1 inch in diameter, consisted of five stout wires, and had been bought secondhand at another mine in the neighbourhood. The internal diameter of the pipes E and G was 1 5/8 inch, consequently there was a clearance of only 5/8 inch. The pipe through which the winding rope passed was larger, being 2 inches in diameter inside, and gave a clearance of 1 1/8 inch. It is evident from its construction that the chance of the rider sticking was by no means small; it could not descend unless all three ropes were parallel, and it is easy to understand that a slight swaying of the bucket or of the guides, or a little dirt or chips getting into E or G, may have made the rider hitch for a moment. The apparatus had been put on for the first time on the afternoon of the accident, and had apparently worked all right from 2 p.m. till 10 p.m. Soon after that hour Pritchard and another man got into the bucket at the surface, in order to be lowered 54 yards to the adit level, where the guides were temporarily held firmly by doors which covered the shaft. The bucket went down safely and rested upon the doors, but while the men were in the act of getting out, the rider fell upon them unexpectedly, killing Pritchard upon the spot. There was a small bonnet or cover over the bucket which was bent by the force of the blow which it received. Evidently the rider had caught somewhere in its descent, and after allowing the bucket to proceed alone for a moment or two dropped suddenly. It has been already stated that the guide ropes were second-hand ; they were somewhat rusty, and had not been greased. A somewhat similar accident happened in Scotland last year, and these casualties show that safety appliances may occasionally prove more dangerous than the risk they are intended to prevent. However, I learn from my former colleague, Mr. Galloway, that he has never known his rider to stick. Figure 2 explains the manner in which it is constructed.

Source: 1894 Mines Inspectors Report (C 7667), North Wales, &c., and Isle of Man District (No. 9) by C. Le Neve Foster, H.M. Inspector of Mines, Page: 14, Accident Number: 27 Where to find this report


Fatalities



Individual page Pritchard, John, aged 29, Miner, Fall of a "rider" or guiding frame for a bucket, in a shaft which was being sunk.
 
All names found
 

Those names marked with image, have a web page providing individual details of the accident, the page may also include a photograph of the deceased. Click on the image symbol next to the name to see the web page.

 

Return Return   Return to Top Return to Top

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 01 Sep 2023

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print