|
John Pritchard
Accident No. 27. — The unfortunate accident at Talacre Mine was caused by the fall of the guiding frame (rider) of a bucket (kibble) in a sinking shaft. When a depth of 120 yards had been reached the manager decided to put in guides, with the very laudable object of steadying the bucket in its journey up and down, and so increasing the safety of the ascent and descent of the men. Two wire ropes were put in and fixed to beams near the bottom of the shaft, and the rider shown in Figure 1 was prepared and placed upon the ropes.
It was composed of two horizontal pieces of oak, A, B, kept apart by the distance pieces C, D, and provided with three pieces of iron pipe, E, F, G. The wire rope guides, H and I, passed through E and G, and the ordinary winding rope, shown by the centre line only, through F. The guide ropes, which were 1 inch in diameter, consisted of five stout wires, and had been bought secondhand at another mine in the neighbourhood. The internal diameter of the pipes E and G was 1 5/8 inch, consequently there was a clearance of only 5/8 inch. The pipe through which the winding rope passed was larger, being 2 inches in diameter inside, and gave a clearance of 1 1/8 inch. It is evident from its construction that the chance of the rider sticking was by no means small; it could not descend unless all three ropes were parallel, and it is easy to understand that a slight swaying of the bucket or of the guides, or a little dirt or chips getting into E or G, may have made the rider hitch for a moment. The apparatus had been put on for the first time on the afternoon of the accident, and had apparently worked all right from 2 p.m. till 10 p.m. Soon after that hour Pritchard and another man got into the bucket at the surface, in order to be lowered 54 yards to the adit level, where the guides were temporarily held firmly by doors which covered the shaft. The bucket went down safely and rested upon the doors, but while the men were in the act of getting out, the rider fell upon them unexpectedly, killing Pritchard upon the spot. There was a small bonnet or cover over the bucket which was bent by the force of the blow which it received. Evidently the rider had caught somewhere in its descent, and after allowing the bucket to proceed alone for a moment or two dropped suddenly. It has been already stated that the guide ropes were second-hand ; they were somewhat rusty, and had not been greased. A somewhat similar accident happened in Scotland last year, and these casualties show that safety appliances may occasionally prove more dangerous than the risk they are intended to prevent. However, I learn from my former colleague, Mr. Galloway, that he has never known his rider to stick. Figure 2 explains the manner in which it is constructed.
If you are researching John Pritchard (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 01 Sep 2023
|
Search |
|
|||