Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

1st December 1928, Page: 151, Column: 1

Design Of Miners' Electric Lamps

By Edwin Lyon, B.Sc. (Tech.), A.M.I.E.E.

From Paper on "The Design and Operation of Miners' Electric Safety-lamps," read before the Barnsley Mining Students' Society at Barnsley Technical College, 29th October, 1928.

An electric safety-lamp consists of three essential and complementary parts — the bulb, the accumulator, and the case covering and connecting them together.

The bulb is an ideal source of light because the incandescent filament is sealed from the atmosphere to maintain the vacuum essential for operation, and, therefore, it is sealed from contact with any explosive mixture. The candle-power given by the bulb varies with the diameter and length of the tungsten filament and the voltage applied. It is then a question of arranging the filament length and diameter to give the highest candle-power consistent with a reasonable length of life. Obviously it is possible to arrange these to give a low candle-power and a long life — even to thousands of hours — or a very high candle-power and short life. The length of life of a bulb giving 1 candle-power at 2 volts and taking 0.9 amp. was in the region of 500-600 hours, in the pit. A bulb designed for a higher voltage has an increased efficiency for the same length of life, because, having a longer filament, the losses due to heat conduction from the feet are reduced. An increase of not more than 10 per cent. can be expected if the voltage is 2.6 volts. Two bulbs of the same "efficiency" may not give similar results in practice — for the care taken in manufacture is reflected on the life performance ; a poor vacuum results in an "early death," and bad connections reduce the light given.

The accumulator — the power-house of the lamp — is probably the most important part, for whilst the characteristics of the bulb, once designed and made, cannot be influenced afterwards, the performance of any accumulator is very largely in the hands of the user. The lead-acid type is now well established in practice. There are two forms in general use : one has flat plates in "free" acid, using a non-spillable device to retain the acid ; and the other has circular concentric plates in a solidified acid. From both a personal and a cost point of view it is essential that the electrolyte be confined to the cell, whether it is acid or alkali, and solidifying does this with certainty. Celluloid, used for the cell containers, is strong and resilient, easily repaired, and enables the condition of the cell to be seen at once. Details (such as terminals) are important, and sound non-corrosive terminals, such as produced by lead plating, are an asset.

Another type is the alkaline cell. As the voltage of one cell is 1.3, a battery is made of two cells connected together to bring the voltage to the more reasonable figure of 2.6. The container is steel, and the electrodes are steel frames with perforated steel pockets holding the active material, quite an attractive proposition from the point of view of strength and utility. Unfortunately it also possesses several disadvantages, including a steep discharge curve, and an electrolyte of high resistance which necessitates the plates being very close together. The electrolyte, although not attacking steel, a valuable property, is unpleasant to handle and readily attacks other metals.

The case of a lamp gives a wider scope for variation in design than either the bulb or cell, and here many differences are noted. There are screw joints and bayonet joints, at the bottom of the lamp or in the middle, varying with the maker's ideas on the most suitable type and position. Bayonet joints are quicker in action and save time in dismantling, although machine operated screw-thread are rapid. As to the position of the joint, a bottom removal ensures that any spilled acid does not remain in the case.

Many well glasses have been designed to diffuse or redistribute the light of the bulb with varying degrees of success. The prismatic well glass, a glass with a plain exterior and vertical flutes on the interior, gives an even candle-power distribution and cuts out shadows without loss, because the re-distribution is by refraction and not obstruction. The maximum candle-power is naturally not as high as when the plain glass is used, but the minimum is raised to compensate for this apparent loss.

The cap lamp presents a means for a much more effective use of the light of the bulb, for all the available light is collected and thrown into one sector, directly on to the work. With the same candle-power bulb as a standard lamp this means four times the light, and when it is remembered that, by virtue of its position in the cap, the light is much nearer the face, the actual light on the work is in the region of ten times that given by a hand lamp. Messrs. Reid and Reis in their recent paper set out fully (see Underground Illumination, The Science and Art of Mining, Vol. 39, No. 8, page 122) the figures relating to the candle-power given by various types of cap lamps, and show the distance of the lamp from the face for various duties. The case for the cap lamp is well set out, and a study of this paper is recommended for first-hand and authoritative and impartial information on the subject. The Authors show that the 2-volt (Ceag) cap lamp compares very favourably with the foreign (alkaline) lamp costing twice as much. Ceag cap lamps are now installed not only in Scotland, the home of the cap lamp, but in the Midlands, Kent, Wales, Canada and Australia, indicating a widening appreciation of a definitely better means of mine lighting.

Lamps of special types for officials' use are designed to give a double beam, a bright penetrating but narrow beam for searching and a wide beam for walking. The Ceag inspection and the smaller bull's eye and deputy lamps are in this class — the beams being produced by correct focussing of special bulbs in silver-plated parabolic reflectors. The latest Ceag lamp to be approved is the Patent Gas Detector — a combination of an electric lamp and an oil lamp, the latter being lit by the medium of the lighting battery current. In practice the lamp can be lit at the right flame height for test.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Lyon, Edwin      
Reid, Charles Carlow      Whos Who Page
Reis, Albert V.      


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print