When the sylvester box has reached the end of its travel along the ratchet, the Conway attachment is used to hold the pull on the sylvester whilst the box is moved into a new position. Use as follows :-
1. Place the Conway on the end of the sword after the box has been slid into position. Secure it with the locking pin and cotter.
2. Pass the long chain through the eye of the Conway.
3. Secure the chain to the object and to the sylvester box.
4. Operate the sylvester lever until the box reaches the end of its travel along the sword.
5. Pass the long pin of the Conway through the first link of the chain on the sylvester side of the Conway (Figure 50).
6. Release the tension from the box and return the box to the Conway end of the sword.
7. Attach the long chain to the box again and continue to pull the object.