1. Set an anchor prop with the head inclined towards the object to be moved and notched into the roof
2. Pass the short piece of chain on the sword round the foot of the anchor prop.
3. Pass the hook underneath the slack of the chain and pull it until the hook is just against the prop with the mouth of the hook uppermost (Figure 48).
4. Attach loose chain to object. Pull this chain tight and place a link in the eye of the sylvester box (Figure 49).
5. Work the operating arm backwards and forwards until the object is in the required position.
To slacken off a Sylvester
1. Take the tension by pulling the operating lever. Lift the pawl above the teeth of the ratchet by means of the button and slowly allow the lever to move forward. Release the button as soon as the pawl is on top of the ratchet teeth. As the lever moves forward the pawl falls into the next groove and takes the tension again.
2. Repeat this operation until the chain attached to the object is sufficiently slack.
3. Remove the chain from the eye of the Sylvester.
Note: Never stand between the lever and the object being pulled because the lever may fly over and cause an injury if its movement is not properly controlled.
Always keep the Sylvester and chain in a clean and well-oiled condition, especially the sylvester box.
Always examine the chains for broken or damaged links before use.