Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Name Index (Local!)
Name Index (Rest of UK)
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

  Disasters - Names Return to Index Disasters - Names  
/ \
Date:  29th March 1951
Colliery:  Bearpark
Company:  National Coal Board
Cause:  Fatal accident
Lives Lost:  1
Category:  

Description

Bearpark Brancepeth Colliery, Durham, on 29th March, 1951 (Below ground — Safety lamp mine) A face worker on a "composite" face received serious injuries, from which he died seven hours later, when the flexible cable of his cap lamp was caught by the unguarded rotating conveyor-motor chain sprocket.

The "composite" face, of which there were seven, supplying a trunk conveyor, was a "short longwall" face and was equipped with a 5 horse-power face scraper conveyor and a 10 horse-power gate belt conveyor, in addition to a coal-cutter. Both conveyors were supplied from a double-circuit room switch and were remote controlled. There was a remote control switch near the loading end of the face scraper conveyor and both conveyors were started and stopped simultaneously from this point. No provision was made, by having separate switches, to enable the face workers to run one of the conveyors without the other, and, the flexible cables at the switch end were not easily detached, as they were attached to the apparatus by means of bolted plugs requiring the services of an electrician.

On the day of the accident, the gate conveyor had just been extended and it was decided to run it to note if it had been properly adjusted. As men were still working on the face scraper conveyor, however, the gate conveyor could not, in the absence of adequate control gear, be run. The face worker then removed the sheet steel guard over the scraper motor sprocket and disconnected the chain from the sprocket. Without replacing the guard, he operated the adjacent remote control push; both motors started and, as his cap lamp cable was near the rotating sprocket, the lamp cable and part of his clothing were caught by the sprocket and he was fatally injured.

This unfortunate accident stresses the necessity of providing adequate means of control of electrical apparatus. A gate-end box with two outlets for the simultaneous control of two separate conveyors, as in this accident, does not provide for the safe control of apparatus. The user must have suitable means placed nearby to enable him to cut off the power to each of the flexible cables, and the remedy lies in providing separate gate-end boxes to control each flexible cable.

Source: 

1951 Mines Inspectors Report



Fatalities



Individual page 

Bellamy, Samuel, aged 48, Buried: Ushaw Moor Cemetery

 
All names found
 

Those names marked with image, have a web page providing individual details of the accident, the page may also include a photograph of the deceased. Click on the image symbol next to the name to see the web page.

 

Return Return   Return Return to Top

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print