|
Samuel Bellamy
Bearpark Brancepeth Colliery, Durham, on 29th March, 1951 (Below ground — Safety lamp mine) A face worker on a "composite" face received serious injuries, from which he died seven hours later, when the flexible cable of his cap lamp was caught by the unguarded rotating conveyor-motor chain sprocket. The "composite" face, of which there were seven, supplying a trunk conveyor, was a "short longwall" face and was equipped with a 5 horse-power face scraper conveyor and a 10 horse-power gate belt conveyor, in addition to a coal-cutter. Both conveyors were supplied from a double-circuit room switch and were remote controlled. There was a remote control switch near the loading end of the face scraper conveyor and both conveyors were started and stopped simultaneously from this point. No provision was made, by having separate switches, to enable the face workers to run one of the conveyors without the other, and, the flexible cables at the switch end were not easily detached, as they were attached to the apparatus by means of bolted plugs requiring the services of an electrician. On the day of the accident, the gate conveyor had just been extended and it was decided to run it to note if it had been properly adjusted. As men were still working on the face scraper conveyor, however, the gate conveyor could not, in the absence of adequate control gear, be run. The face worker then removed the sheet steel guard over the scraper motor sprocket and disconnected the chain from the sprocket. Without replacing the guard, he operated the adjacent remote control push; both motors started and, as his cap lamp cable was near the rotating sprocket, the lamp cable and part of his clothing were caught by the sprocket and he was fatally injured. This unfortunate accident stresses the necessity of providing adequate means of control of electrical apparatus. A gate-end box with two outlets for the simultaneous control of two separate conveyors, as in this accident, does not provide for the safe control of apparatus. The user must have suitable means placed nearby to enable him to cut off the power to each of the flexible cables, and the remedy lies in providing separate gate-end boxes to control each flexible cable.
Ushaw Moor — CemeteryLocation: OS Map 88, Grid Ref NZ233424
If you are researching Samuel Bellamy (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||