|
Two men had descended from the Five-quarter seam to the Low Main seam at Blackhall Colliery, Co. Durham, and the onsetter was preparing to send the cage back empty to the Five-quarter without putting on the safety gate, when a workman said he wished to go up to the Five-quarter. No signal of "three" was given to the surface, and no gate was put on, but the onsetter merely gave the signal to go to the Five-quarter. Soon after the cage started, the onsetter signalled again to the Five-quarter that the empty cage could be taken to the surface. The onsetter at the Five-quarter did not require the cage, so he signalled to the surface that the cage should be taken forward. Before the engineman had received the latter signal, he had almost pulled up at the Five-quarter landing, and the man in the cage proceeded to get out. While he was half-way out the speed of the cage was accelerated, and the man fell out and was killed. Had the proper signals been given, or even the cage gate fixed, the accident would not have happened.
|
|||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||