|
Number 26 on the list occurred at Newbottle (Margaret), Colliery, belonging to Messrs. The Lambton Collieries, Ltd., on January 15th, and caused the death of a coal filler five days afterwards. A shot firer was attempting to explode an Amvis shot with an electric battery in the coal face in the Brass Thill Seam; having tried twice without being successful, owing to the cable having been damaged by a previous stone shot which he had fired, he detached the cable from the battery, and while it was still attached to the shot he asked the coal filler to take hold of the cable, close up to the shot, and said he would go along the cable with his fingers and examine it to see whether there were any defective places. While he was doing this the shot exploded and blew the stemming out, which hit and severely injured the deceased's shoulder. At the time of the accident a coal cutting machine, driven by electricity, was at work about 20 yards along the face, and the cable to it was parallel to the face in which the shot was fired. lit was suggested that there might have been a leakage on this cable and it had, through the shot firing cable, exploded the shot. In order that this theory should be correct there were so many circumstances which would have to fit in that I do not think it is at all a probable one. The insulation of both cables was examined, both before and after the accident, and found to be in good order. The most probable cause, in my opinion, of the shot exploding, was either the shot firer or the deceased man pulled the wires attached to the detonator and thus fired the shot. The battery cable should have been detached from the shot as well as from the battery when it was being examined, and if this precaution had been taken the accident would not have happened. The manager subsequently issued written instructions to the shot firers and coal cutting machine men that, in future, when a shot was being fired in a longwall face where a coal cutter was at work, before the shot-firing cable was attached to the shot the current to the coal cutter must be switched off at the gate-way switch. This, I think, is a very necessary precaution at all collieries where electrically driven coal cutters are in use, and I hope it will be carried out in all cases when shots are being fired.
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||