|
Fatal Accidents in Shafts. No. 48 accident in the list occurred at a self acting drop staple, and caused the death of the onsetter, who was employed at the bottom of the staple. It appears that he had put some timber into the cage at the bottom of the staple (which is 11 fathoms in depth), and then called up to the brakesman at the top of the staple to have it drawn up, but that a part of the timber, which had projected from the cage, came into contact with some of the timber fixed in the staple, and arrested the ascent of the cage near to the bottom of the staple. The onsetter then went up ladders which were fixed in the staple, and liberated the cage which was again put into motion ; but the timber in the cage, for the second time, came into contact with fixed timber, a little higher up the staple, and the onsetter again went up the ladder to liberate it, and afterwards called to the brakesman to raise the cage while he was beside it ; on the cage being again put into motion it was almost directly arrested, for the third time, in its ascent, and on the brakesman coming down the ladders he found the onsetter's head jammed between one of the cross timbers fixed in the staple and the cage. The timber put into the cage by the victim of the accident ought to have been tied so as to prevent it from projecting, and even in the absence of that ordinary precaution, with proper care he need not have lost his life, if we assume the evidence to be correct as to his ordering the cage to be raised after freeing it the second time, and I saw no reason to doubt its correctness.
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||