Tweet
Support of Mine Workings
LIST OF FIGURES
1
Fatal accidents due to falls of ground, manshifts worked below ground and related output
2
Prop penetration
3
Support setting on an inclined face
4
Filling spaces above props
5
Unstable prop settings
6
Minimum dimensions of lids
7
Cases where lids are not required
8
Chock building
9
Pack building
10
Arch girders and forepoling at roadheads
11
Arch girders at back rippings
12
Definition of face working
13
Support on prop-free front
14
Power loaded armoured conveyor faces on which persons frequently work on the face side of the conveyor
15
Support requirements for power loaders making a pre-cut
16
The relation between power loading and support setting
17
Illustrating the use of non-approved props on armoured conveyor faces
18
Prop spacings
19
The use of bars where applicable to overcutting
20
Relaxation on use of bars behind pack front
21
Two coupled bars, each supported by a prop, with one bar in cantilever
22
Spacing of props at roadheads
23
Unit system of support at roadheads
24
Support at roadheads
25
Alternative support to ripping lip
26
Ripping face support using roof bolts
27
Use of temporary supports
28
Securing a small cavity with stretchers
29
Dealing with a cavity in weak ground
30
Tackling a large fall in difficult ground
31
A high narrow fall in a roadway
32
Dealing with a large cavity on a road
33
Specification of system of packing
34
Chocks set to prevent roof over-riding supports at waste edge
35
Advance packs
36
Showing waste edge not more than 5 feet in front of pack line
Mail:
Webmaster
Back
Home
Contains public sector information licensed under the
Open Government Licence v3.0
.
Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022
Privacy Policy
Terms & Conditions
Search
Print