|
Chapter XVII.Extended Use Of The Steam-Engine; The Locomotive; Steamboats. — Introduction Of Gas-Lighting. "Soon shall thy arm, unconquer'd Steam! afar We have seen that the chief use to which the steam-engine was put for a long period subsequent to the (late of its first invention was to draw water from coal and other mines; then it came to be applied indirectly to draw the coal out of the pits through the medium of the double water-wheel; and soon after the invention of the double-acting engine by Watt it began to come into general use applied directly to the shaft of the drum, or rope-roll, and quickly superseded the previous circuitous arrangement. The last of the double water-wheels employed drawing coal in the North of England were at Chopwell Colliery, and the A pit, Greenside, near Ryton; one of which was abandoned in 1800, and the other in 1808. In the beginning of the present century a further extension of the use of the steam-engine began to be thought of. At this time the conveyance of coal on railways was performed entirely by horses, excepting in cases where conditions existed favourable to the employment of self-acting incline-planes, when the loaded waggons in descending were made to haul up the ascending empty ones. Hence the railways were made merely of sufficient strength to bear the weight of the loaded coal-waggons. On most of them wooden rails were still used, but the employment of cast-iron rails was making steady progress; and in a few cases light bars of malleable iron had been applied on the top of wooden rails with good results. An early railway of the latter description was constructed at Alloa Collieries, on the Frith of Forth, in 1785. The wooden foundation was of a substantial character, consisting of broad sleepers about a foot apart, to which were secured the rails, four inches square, in the form known as the "double-way," there being both an upper and an under rail employed. On the top of the upper rail a light bar of malleable iron was laid, 1¾ths of an inch in breadth, and ¾ths of an inch in thickness. Light waggons were used, with cast-iron wheels, twenty-seven inches in diameter, and carrying thirty hundredweight of coal ; a horse's load consisting of three such waggons. This railway was found to be very solid and durable, and for a number of years was acknowledged to be "the most complete in Britain." Light malleable-iron rails were also applied at Walbottle Colliery, near Newcastle-on-Tyne, about 1805, but being narrow, they were found to cut the periphery of the waggon wheels, in consequence of which they were subsequently taken up. At Lord Carlisle's colliery, on Tindale Fell, rails of this material gave more satisfaction, being laid down in 1808, and after having been in use for a period of sixteen years they "then appeared very little worse." But during the first quarter of the present century when iron rails were employed they were almost invariably of cast-iron. They were usually about four feet in length, and of various sections; and were dovetailed together at the joints in several different ways. At the very commencement of the century a combination of circumstances occurred favourable to the application of the steam-engine to the haulage of coal-waggons on railways. Watt's patent for the double-acting engine had then expired; the steam-engine entered on a new phase of its history when Trevithick discarded the condensing apparatus, and brought out his high-pressure engine; while to this was added the gradual improvement of railways, which was going forward in virtue of the substitution of iron for wood in their materiel. Thus it happens that almost simultaneously projects were started for applying the steam-engine to the haulage of railway-waggons, both in the form of travelling engines, or locomotives, dragging the waggons behind them, and of fixed engines hauling with ropes: Trevithick being the first to attempt the former system in South Wales, and Curr the latter in the North of England. As early as the year 1802 far-seeing individuals had begun to speculate upon the "great national importance" which the locomotive engine (patented in this year by Trevithick and Vivian) might eventually attain to, but many difficulties had to be surmounted before it began to achieve any measure of success. The attempts to employ it on common roads ended in complete failure. On railways for a time it hardly fared much better, chiefly on account of the weakness of the rails. At first a single cylinder and fly-wheel were employed; but though the engine was equal in strength to many horses, its great weight caused it to be constantly breaking the cast-iron rails, while its great strength was too much for the coupling chains between the waggons, which continually gave way. These discouragements caused Trevithick to abandon the locomotive which he applied on the Merthyr Tydvil railway in 1804,13 after making only a few trips over the line. It was doubtless the apprehension of similar difficulties that led Mr. Blackett, the proprietor of Wylam Colliery, near Newcastle-on-Tyne, to give up the project he had entertained of applying one of Trevithick's locomotives to haul the coal-waggons on the railway between his pits and his staiths at Lemington. A locomotive was actually built for him at Gateshead-on-Tyne, in 1805, but it never left the works. After being exhibited to a number of gentlemen, on a temporary railway laid down in the foundry-yard, it was taken off its wheels and converted into a stationary engine. More success was achieved at first in applying the steam-engine to haul with ropes, especially in cases where a double slope could be arranged for, as an engine placed at the summit served the double purpose of hauling up and lowering both the loaded and empty trains. The first to employ fixed engines in hauling waggons was Mr. Curr, who, in 1805, applied one to raise the waggons from the valley at Birtley, near Gateshead, to the high grounds at Black Fell. This was immediately followed by other schemes of a similar character; and about the same time fixed engines began to be employed underground in hauling the coal from dip workings. Horses continued to be used on level railways, especially such as had a slight fall in favour of the loaded waggons. Not unfrequently several different systems were in use on different parts of the same line — self-acting inclines for single slopes where available, fixed engines for double slopes, and horses on level parts of the road. Mr. Blackett's railway at Wylam was nearly level, and was entirely worked by horses at considerable cost. Up till the year 1808 it was laid with wooden rails, but at this time he reconstructed it, taking up the wooden rails and laying down cast-iron plate-rails. This step was doubtless taken with a view to the employment of a locomotive engine upon it — a project which he seems to have keep steadily in view though he did not carry it out in 1805. Having renewed the railway he wrote to Trevithick, in 1809, on the subject of a locomotive, the patent for which, held by Trevithick and Vivian, had still seven years to run. In his reply Trevithick stated that he was engaged in other pursuits, and having declined the business could render no assistance. Mr. Blackett's project thus received another check. An ingenious arrangement for employing the locomotive engine in the haulage of coal-waggons on light railways was invented and patented by Mr. John Blenkinsop in 1811. Blenkinsop was a native of Walker, a village situated about two miles to the east of Newcastle-on-Tyne. He was a cousin and pupil of Mr. Thomas Barnes, the viewer of Walker Colliery and the pits belonging to the Brandling family. On the death of Barnes in 1801, or shortly afterwards, Blenkinsop was appointed viewer of the collieries of J. C. Brandling, Esq., at Middleton, near Leeds. These collieries were connected with the town of Leeds by a railway three or four miles in length, on which the coal waggons were conveyed by horses. Having conceived that the haulage of the coal might be effected more economically by means of a locomotive engine, Blenkinsop devised a scheme for the purpose. His invention consisted in the use of a rack-rail, fixed in the centre of the railway, or forming part of the rails on one side; and the locomotive was arranged to drive a pinion wheel working in the rack-rail, thus propelling itself and the load attached to it. The application of the rack enabled a comparatively light engine to haul a heavy train of waggons. Blenkinsop employed the then celebrated firm of engineers, Messrs. Fenton, Murray, and Wood, to construct locomotive engines for him. His engines were provided with two steam cylinders working cranks at right angles to each other. This was a great improvement on Trevithick's engine, a regular and steady action being obtainable from it without the use of a cumbersome fly-wheel. The first of Blenkinsop's engines commenced working on the railway from Middleton Collieries to Leeds in June, 1812. Thousands of people assembled to witness the trial of the new and strange machine, which was "crowned with complete success." From this time Leeds was regularly supplied with coal by means of the steam locomotive. Regarding his engines and their performances Blenkinsop stated, in reply to Sir John Sinclair, that an engine with two eight-inch cylinders weighed five tons, and drew twenty-seven waggons, weighing ninety-four tons, on a dead level, at three and a half miles per hour, or fifteen tons up an ascent of two inches in the yard (1 in 18); when lightly loaded it travelled at ten miles an hour; did the work of sixteen horses in twelve hours, and cost £400. Blenkinsop's locomotive was a success from the first, and established the fact that the haulage of waggons on level railways might be performed more economically by steam-engines than by horses. It was the most efficient of the early locomotives, but there were several obstacles in the way of its extended use, viz., the patent royalty, the cost of the engine, and the necessity of having a special form of railway. No sooner had Blenkinsop shown that steam locomotion was practicable, than a rush of inventors followed in the same line, and a number of patents were immediately taken out for various forms of locomotive engines to suit the railways of the period. The Messrs. Chapman constructed an engine intended to pull itself along by means of a chain; William Hedley, the viewer of Mr. Blackett's colliery at Wylam, devised an engine to work on ordinary railways, the driving-wheels of which he proposed to arm with a double row of projecting teeth to bite into the ground, and thus give the engine a grip of the track; William Brunton, of Butterley Ironworks, Derbyshire, invented a locomotive, termed by him the "Mechanical Traveller," which was designed to push itself forward by means of legs, or levers, projecting behind. The only one of these schemes that came to anything was Hedley's. By a series of experiments which he made Hedley found that he could obtain sufficient hauling power simply from the adhesion of the wheels of the locomotive to the rails, without any other accessory; and to him is due the merit of being the first to employ smooth-wheeled locomotives in the regular haulage of coal-waggons. His locomotive was known as the "Puffing Billy." It commenced working in 1813, and from this time locomotives continued to be employed in the haulage of the waggons on the Wylam railway. Hedley's first engine had only one cylinder and a fly-wheel, and was rather unsteady in its working and difficult to manage; but it established the fact that locomotives with smooth wheels might be successfully employed on any railway approaching to a dead level. As at first constructed, however, its superiority to horses in point of economy was not very decided. A circumstance more favourable to the introduction of steam locomotion in the North of England was the arrival of one of Blenkinsop's two-cylinder engines from Leeds, to work on the Kenton and Coxlodge Railway. The first trial of this engine took place on the 2nd of September, 1813. The event excited great interest and was witnessed by "a vast concourse of spectators." The engine was very highly approved of, and its complete success anticipated. It was designed to haul sixteen loaded waggons, of an aggregate weight of about seventy tons, at a speed of three and a half miles an hour. About the same time another of Blenkinsop's locomotives was placed upon the railway at Orrell Colliery, Wigan; and from a letter of Blenkinsop's, dated 26th March, 1814, we learn that the engines at Leeds, Newcastle, and Wigan, were all "giving the greatest satisfaction," and were performing their work at one-sixth of the cost of horse-power. Immediately after Blenkinsop's locomotive had been started on the Kenton and Coxlodge Railway, it was determined to adopt steam locomotion on the Killingworth Railway, which was situated in the immediate vicinity, and Mr. Stephenson accordingly set about the construction of an engine. Following the design of Blenkinsop's engine, he adopted a cylindrical wrought-iron boiler, with an internal wrought-iron fire-tube passing through it; two vertical cylinders of eight inches diameter and two-feet stroke, placed one in front of the other on the top of the boiler, and partially let into it; with cross-heads and connecting-rods to work the propelling gear. At this point, however, he deviated from Blenkinsop's plan, and avoiding the patent arrangement of pinion and rack-rail, he adopted smooth wheels, as Hedley had done. After being about ten months in making, the first trial of the engine took place on the 25th of July, 1814. Two days later it was tried on a piece of road, with edge-rails, ascending about 1 in 450. It dragged after it, exclusive of its own weight, eight loaded carriages, weighing altogether thirty tons, at the speed of four miles an hour, and after this time continued to work regularly. Shortly afterwards Mr. Stephenson, in conjunction with another Killingworth engineer named Dodds, introduced a modification in another engine which was built, abandoning the spur-gearing and attaching the connecting-rods directly to the driving-wheels. This arrangement was patented by them in 1815. It was a simplification, but was not productive of unmixed good at the time. A chain was employed to couple the axles together, but great inconvenience arose from its liability to stretch in the course of working, which occasioned the driving-wheels to slip more or less at every stroke of the pistons, and caused a great loss of power. Mr. Wood estimated the loss from this source at about thirty per cent. of the power of the engine. This defect was obviated in Blenkinsop's engine, the spur-gearing and rack-rail being completely tied together by wheel-work, so that no slipping could take place — the object, indeed, for which the arrangement was invented. For many years the smooth-wheeled locomotive made little headway; the weakness of the railways, and the immature character of the mechanism of the engine, being great drawbacks to its use. In 1816 a locomotive engine was purchased at Newcastle by Mr. Buddle, to work on the railways at Whitehaven Collieries, but its weight was found to be too much for the cast-iron rails, and after being tried for some time its use was discontinued. Another was procured from Mr. Stephenson in 1819, to work on the Duke of Portland's railway from Kilmarnock to Troon, in Scotland; but it, like the one above-mentioned, proved a failure, probably owing to the same cause. The first railway on which locomotives were applied to any extent was the Hetton Colliery Railway. This important colliery, situated near the village of Hetton-le-Hole, in Durham, was commenced to be opened out in the year 1819, and required the construction of a line of railway to convey the coal to the shipping-places on the River Wear, some eight miles distant. Mr. Stephenson, who still held the position of engineer to the Grand Allies, and resided at Killingworth, succeeded in obtaining the appointment of consulting engineer on the new line, his brother, Robert Stephenson, being resident engineer. The railway was commenced in 1819 and completed in 1822, and was constructed in accordance with Mr. Stephenson's ideas, and laid with a form of cast-iron rail designed and patented by himself and Mr. Losh, of Walker Ironworks, some years before. As the character of the country to be traversed precluded the construction of a level railway, it was necessary to employ various forms of hauling power. The line was opened for traffic on the 18th of November, 1822, the machinery employed to work it consisting of "five of Mr. George Stephenson's patent travelling engines, two sixty-horse power reciprocating engines, and five self-acting incline planes." The ill-success of the locomotives will be adverted to hereafter. Though railways had been employed for conveying coal in the colliery districts for upwards of one hundred and fifty years, little or nothing had yet been, done towards putting the invention to any other use. With two trifling exceptions the lines of railway were all in the hands of private companies; the exceptions being the small public railway constructed by Mr. Jessop at Loughborough, in Leicestershire, in 1789; and the railway from Merstham to Wandsworth, through Croydon, in Surrey, opened in 1803. From the beginning of the present century the advocates for the employment of railways for purposes of ordinary traffic rapidly increased in number, and many lines were projected. At first it was proposed to connect large towns with each other by their means, but soon more comprehensive schemes were brought forward. One of the most earnest advocates for the general use of railways was Thomas Gray, a native of Leeds, who, in 1820, published a pamphlet entitled Observations on a General Iron Railway, or Land Steam Conveyance, to supersede the necessity of Horses in all Public Vehicles, &c. Gray proposed to employ Blenkinsop's locomotives to work the railway, and suggested the construction of "the first link" between the towns of Manchester and Liverpool. Nothing came out of Gray's project for some years, but in the meantime a public company was formed to construct a railway between Stockton and Darlington, to open out the coal district of the south of Durham. This was a longer and more important line than any yet made. An Act of Parliament was obtained in 1823; and Mr. Stephenson, having obtained the appointment of engineer, left Killingworth to superintend its construction. We have seen that in some instances light malleable-iron rails had been already employed on the top of wooden ones with satisfactory results, but previous to 1820 they were only used very sparingly and in short lengths of two or three feet. In this year the use of rails of malleable iron received a great impulse from the invention of the process of rolling them in lengths of about eighteen feet. The process was invented and patented by Mr. Birkenshaw, of Bedlington Ironworks, Northumberland; and from this period the use of rails of cast iron began to decline, and malleable-iron rails to take their place. These, however, were still made of a light section, weighing at most about 28 lbs. per yard. The great superiority of the new material led Mr. Stephenson to recommend the adoption of malleable-iron rails on the Stockton and Darlington Railway, but on account of their extra cost it was decided to lay only one-half of the line with malleable-iron and the other half with cast-iron rails. The country through which the railway passed admitted of the construction of a more level line than that at Hetton Colliery, it being necessary to employ only one fixed engine, while the remainder of the road admitted of being worked either by means of locomotive engines or horses. It was accordingly decided to apply both to the work of haulage. The line was opened for traffic on the 27th of September, 1825; and one locomotive was added after another till four were in use, three of which were supplied by Mr. Stephenson, and the fourth by Mr. Robert Wilson of Newcastle, while the surplus traffic was carried on by means of horses. Even at this time the superiority of the smooth-wheeled locomotive engine to fixed engines and horses was by no means decided. At iletton Colliery three of the locomotives had actually been abandoned after some years' trial, and fixed engines substituted; and in 1827 it was a matter of consideration whether the two remaining locomotives should not likewise be taken off the line, and their places also be filled by reciprocating engines. Neither on the Stockton and Darlington Railway do the locomotives appear to have given any measure of satisfaction; indeed the idea of their abandonment, in favour of horses, is stated to have been seriously entertained in 1827. For a considerable number of years no improvement, of any importance, had been effected in the locomotive. Its rate of speed was ordinarily about four or five miles an hour, and its load about thirty or forty tons in summer, and much less in winter. The first individual to introduce a number of novel and highly successful alterations in its mechanism was Timothy Hackworth, an ingenious mechanic who had had considerable experience in the building of locomotives. Hackworth was a native of Wylam, and had aided in the construction of the locomotives there; for a short period he acted as superintendent of the engine factory established at Newcastle-on-Tyne by Mr. Stephenson and Mr. Pease; and after the opening of the Stockton and Darlington Railway he was appointed manager of the working department on the new line. He was well acquainted with the weak points of the locomotives then in use, and was impressed with the conviction that they were susceptible of great improvement. Having obtained the sanction of the railway directors, he set about constructing an engine, after his own design, in 1827. Departing from the usual plan of having the cylinders connected to different shafts, he placed them on opposite sides of the boiler, and applied the connecting rods to the same axle-tree; at the same time he adopted the return fire-tube, which was used by Trevithick and Hedley, in lieu of the straight flue employed in Blenkinsop's and Stephenson's engines; and by contracting the orifice through which the exhaust steam entered the chimney, he greatly increased the force of the steam blast and effected a more vigorous combustion in the furnace, thus obtaining a greater command of steam. The locomotive in which the above improved arrangements were first combined was named the "Royal George," and was the most efficient and powerful engine which had yet been built. Hackworth's improvements introduced a new type of locomotive, and aided to a considerable extent in the establishment of the locomotive system. From this time Blenkinsop's and George Stephenson's engines went out of date, and in all the new locomotives the cylinders were placed at the sides of the boiler, and applied to drive the same axle. The locomotive engine and the railway system, however, were not established upon a firm foundation until after the construction of the Liverpool and Manchester Railway, of which also Mr. Stephenson was engineer. On this line malleable-iron rails alone were used, though those first laid down were of a very light section. Even at the date of the completion of this line much difficulty was experienced in deciding upon the hauling power to be adopted; but as it was evident that horse-power was inadequate to cope with the expected traffic, the choice lay between locomotives and fixed engines. The events which brought about a decision in favour of locomotives are well known. By the happy combination of the multi-tubular boiler and the steam-blast, Mr. Robert Stephenson succeeded in producing, in the "Rocket," an engine far superior to any previously built, both in point of speed and efficiency. The necessity for adopting a heavier form of rail, and heavier engines, was at once apparent. The railway was relaid with heavy rails at considerable cost; heavier locomotives were built; and from this time the superiority of the railway system to every other mode of conveyance was placed beyond question. The building of railways commenced in earnest soon afterwards in nearly every part of the country; and the two Stephensons, father and son, rose rapidly to fame and fortune as the first railway engineers in the kingdom. Another use of the steam-engine, which dates from the beginning of the present century, and which gave a powerful impulse to the trade of the country, and particularly to the coal trade, was its application to propelling boats. From the time of the invention of the double-acting engine by Watt, the solution of the problems of steam locomotion and steam navigation advanced pari passu; and it is a singular coincidence that in the same year and the same month that the first locomotive engine commenced to work regularly at Leeds, the first successful steam-boat in Europe was launched by Henry Bell on the Clyde, the date of both events being June, 1812. Within a few years from this time the application of steam-boats to tow vessels into and out of harbours put an end to the custom, hitherto pursued, of closing the northern collieries for two months during the winter season.
In addition to the direct and indirect advantages accruing to the coal trade from the extended use of the steam-engine, other circumstances conspired at this time to impart a powerful stimulus to the trade. The increased demand for iron, for railways and other purposes, gave a great impulse to the iron manufacture, which again reacted on the coal trade. Besides, a new and important demand for coal sprang up at this period from another source. In the first era of its history the mineral had been employed only as a source of heat; after the invention of the steam-engine it had become available as a source of power; now a commencement was made to utilise it as a source of light. The idea of lighting towns by means of coal gas, conveyed from a central point through iron pipes, was at first ridiculed by many as an impossibility. One member of a Parliamentary Committee is stated to have experienced much difficulty in grasping the idea of "a light without a wick." But it was soon ascertained that the project was neither impossible nor impracticable, and town after town became rapidly supplied with its establishment of gas-works, gas-pipes, and gas-lamps; and the means of obtaining a cheap, brilliant, and easily managed light, were placed at the command of every householder. Thus it happened that, from various causes, the coal trade entered upon a period of greater activity than ever at the beginning of the present century. According to the most reliable estimates, the total production of coal in the country in 1800 was about ten millions of tons per annum. In 1830 it was estimated to have risen to twenty millions of tons: the metropolis alone consuming two millions of tons, in the conveyance of which from the northern collieries a fleet of fourteen hundred boats was employed. The opening up of the interior of the country, which had been partially effected by means of canals during the latter part of the eighteenth century, went on with much greater rapidity after the general introduction of railways began. Great facilities for the transport of coal were thus presented to all the mining districts, and the way paved for the prodigious development of the coal and iron industries which has since taken place. 13 In 1802 the Coalbrookdale Company constructed a locomotive for their railways, but we have no information as to the amount of success attending its working. [return ↑]
|
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||