Shafts and Winding.
36. — (1) There must be in every mine at least two shafts or outlets, with which every seam for the time being at work in the mine shall have a communication, so that such shafts or outlets shall afford separate means of ingress and egress available to the persons employed in every such seam, whether the shafts or outlets belong to the same mine or to more than one mine.
(2) Such two shafts or outlets must not at any point be nearer to one another than fifteen yards, and there shall be between them a communication not less than four feet wide and four feet high.
(3) Every part of the mine in which ten or more persons are employed at the same time shall be provided with at least two ways affording means of egress to the surface, and so arranged that, in the event of either becoming impassable at any point, the other will afford means of egress to the surface.
(4) No person shall be precluded by any agreement from doing such acts as may be necessary for complying with the foregoing provisions of this section, or be liable under any contract to any injunction, damages, penalty, or forfeiture for doing such acts as may be necessary in order to comply therewith.
(5) The foregoing provisions of this section shall not apply —
| | (i) |
in the case of a new mine or seam being opened —
|
| | |
| | (a) |
to any working for the purpose of making a communication between two or more shafts or outlets; or
|
| | (b) |
to any working for the purpose of searching for or proving minerals;
|
|
| | |
so long as not more than twenty persons are employed below ground at any one time in the whole of the different seams in connexion with a single shaft or outlet; nor
|
| | (ii) |
to any proved mine, so long as it is exempted by order of the Secretary of State on the ground either —
|
| | |
| | (a) |
that the quantity of mineral proved is not sufficient to repay the outlay which would be occasioned by sinking or making a second shaft or outlet, or by establishing communication with a second shaft or outlet, in any case where such communication existed and has become unavailable; or
|
| | (b) |
that the workings in any seam of the mine have reached the boundary of the property or the extremity of the mineral field of which that seam is a part, and that it is expedient to work away the pillars already formed in course of the ordinary working, notwithstanding that one of the shafts or outlets may be cut off by so working away the pillars of that seam;
|
|
| | |
and so long as not more than twenty persons are employed below ground at any one time in the whole of the different seams in connexion with a single shaft or outlet; nor
|
| | (iii) |
to any mine —
|
| | |
| | (a) |
while a shaft is being sunk, or an outlet being made; or
|
| | (b) |
one of the shafts or outlets of which has become, by reason of some accident, unavailable for the use of the persons employed in the mine;
|
|
| | |
so long as the mine is exempted by order of the Secretary of State, and as the conditions (if any) annexed to the order of exemption are duly observed.
|
(6) The foregoing provisions of this section requiring the two shafts or outlets of a mine to be separated by a distance of not less than fifteen yards shall not apply to any mine which is provided with two shafts sunk before the first day of January eighteen hundred and sixty-five, and at that time separated by a distance of less than ten feet, or commenced to be sunk before the first day of January eighteen hundred and eighty-eight, and separated by a distance of ten feet or upwards, but less than fifteen yards.
(7) The foregoing provisions of this section as to the dimensions of the communications between two shafts or outlets shall not apply to any mine or class of mines for the time being exempted therefrom by order of the Secretary of State by reason of the thinness of the seams or other exigencies affecting that mine or class of mines, and so long as the conditions (if any) annexed to the order of exemption are duly observed.
37. — (1) Every entrance to any place below ground in a mine which is not in actual use or course of working or extension shall be kept securely fenced across the whole width of the entrance, so as to prevent persons inadvertently entering the same.
(2) The top of every shaft which for the time being is out of use, or used only as a ventilating shaft, shall be kept securely fenced.
(3) The top and bottom of every working, ventilating, or pumping shaft, and all entrances into the workings therefrom, shall be kept securely fenced, but this shall not be taken to forbid the temporary removal of the fence for the purpose of repairs or other operations if proper precautions are used.
38. Every working or pumping shaft and every such shaft in the course of being sunk shall be securely cased or lined, or otherwise made secure.
39. Where of the two shafts communicating with a seam one is a furnace shaft, and both shafts are provided with apparatus in use for raising and lowering persons, every person employed in the seam shall, on giving reasonable notice, have the option of using the downcast shaft.
40. — (1) Proper and separate apparatus for raising or lowering persons to or from the surface, of such a character as may be prescribed by the regulations of the mine, shall be kept at each of the two shafts or outlets required by the foregoing provisions of this Act, and at any other shaft or outlet for the time being in use for the purpose of ingress or egress, and such apparatus, if not in actual use, shall be constantly available for use, and no person shall, except for the purposes of sinking operations or for the purpose of examining or repairing the shafts or outlets or the machinery or appliances therein, or for the purpose of accompanying animals or bulky material which cannot be raised or lowered in a case, or where a written exemption is given by the inspector of the division, be raised or lowered otherwise than in a cage constructed in accordance with the provisions of this section:
Provided that this subsection shall not apply to any outlet by which persons can walk into or out of the mine otherwise than by ladders.
(2) Where the apparatus ordinarily used for raising or lowering persons to or from the surface is worked by mechanical power it shall, if the shaft is vertical, be provided with a detaching hook, and, if the shaft is more than one hundred yards in depth, shall also be provided with an effective automatic contrivance to prevent overwinding.
The provisions of this subsection shall not apply to any mine or class of mine which is exempted by the Secretary of State on the ground of the special circumstances of the mine or class of mine, and shall come into operation on the first day of July nineteen hundred and thirteen or such later date as, in view of the circumstances of the mine, may be fixed by the inspector of the division.
(3) Guides shall be provided in the case of every working shaft over fifty yards in depth, and, in the case of every shaft in the course of being sunk, over one hundred yards in depth, unless a written exemption is given by the inspector of the division.
(4) Keps for supporting the cage when at rest shall be provided at the surface level where mineral is usually unloaded, but shall not be provided at any intermediate landings in the shaft. The keps provided at the surface level, and also the keps, if any, provided at the bottom of the shaft, shall be used when persons are entering or leaving the cage.
The foregoing requirement as to the provision of keps shall not apply to a system of winding by means of a single rope where the cages are held by the friction of the rope on the winding sheave.
(5) Every winding rope shall be recapped at intervals of not more than six months in accordance with general regulations under this Act, and no winding rope which has been in use for more than three and a half years or which has been spliced shall be used for raising or lowering persons.
(6) Every engine used for raising or lowering persons shall be completely separated by a substantial partition from every other engine used for that purpose at the same time, and from machinery used for any purpose other than for raising or lowering persons, unless a written exemption is given by the inspector of the division.
(7) Every cage shall be provided with catches or other suitable contrivance to prevent tubs falling out, and, if used for lowering or raising persons, shall be covered in completely at the top and closed in at the two sides in a sufficient manner to prevent persons or things from projecting beyond the sides, and shall be provided with suitable gates or other rigid fences and with a rigid hand-bar fixed in a position where it can be easily reached by all persons in the cage.
(8) Rods shall not be used for attaching a cage to the winding rope unless connected with the cage through the medium of an efficient spring.
(9) There shall be on the drum of every apparatus used for lowering or raising persons such flanges or horns, and also, if the drum is conical, such other appliances as shall effectively prevent the rope from slipping.
(10) Where the apparatus used for lowering or raising persons is worked by mechanical power, there shall be provided one or more brakes of sufficient power by themselves to hold the cage when loaded at an point in the shaft, and a proper indicator (in addition to any mark on the rope) showing to the person who works the machine, on a dial or in some sufficient manner, the position of the cage in the shaft and placed in such a position as to be easily seen by him at the same time as the marks on the rope.
If the drum is not on the crank shaft, there shall be an adequate brake on the drum shaft.
(11) No minerals, tubs, timber, or other materials, and no implements or tools other than scientific instruments, shall be raised or lowered whilst persons are being raised or lowered in the same shaft, whether in the same cage or not:
Provided that —
| | (a) |
this subsection shall not apply in the case of men working in the shafts, or in the case of men accompanying animals or bulky materials which cannot be raised or lowered in a cage; and
|
| | (b) |
where a shaft is divided throughout by a substantial partition, each section of the shaft shall, for the purpose of the provisions of this subsection, be deemed to be a separate shaft.
|
41. Every working shaft and every shaft in the course of being sunk shall, if exceeding twenty-five yards in depth, be provided with some proper means of communicating distinct and definite signals from and to the bottom of the shaft, and from and to every entrance for the time being in use between the surface and the bottom of the shaft, to and from the surface.