Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
Items for sale
Items for Sale
e-Books
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

E-Book Prev Page Return to Index Next Page E-Book
/ Index \

to make it, and its immense cost, manifestly rendered it still a great desideratum to produce guns rapidly, and cheaply, of a material equal to, or greater in tensile strength than wrought Iron: and, if possible, free from the liability which that material had to flaws and to deterioration during its long exposure to a welding heat. It was believed that the Bessemer process supplied this desideratum ; as masses of cast malleable metal could be produced of 10 tons or 20 tons in weight in a single piece, and two or three such pieces might be conveniently made by the same apparatus in one day. The metal so made might be either soft malleable Iron, or soft Steel. In order to prove the extreme toughness of such Iron, and the strain to which it might be subjected without bursting, several cast and hammered cylinders were placed cold under the steam-hammer, and were crushed down, without the least tearing of the metal, as was shown by the samples exhibited. These cylinders were drawn from a round cast Iron ingot of only 2 in. greater diameter than the finished cylinder, and in the precise way in which a gun would he treated ; they might, therefore be considered as short sections of an ordinary 9-pounder field-piece. The tensile strength of the samples, as tested at the Royal Arsenal, was 64,566 lb. per square inch, while the tensile strength of pieces cut from the Mersey gun gave a mean of 50,624 lb. longitudinally, and 43,339 lb. across the grain; thus showing a mean of 17,550 lb. per square inch in favour of the Bessemer Iron.

If it was desired to produce ordnance by merely casting the metal, the ordinary founding process might be employed, with the simple difference, that the Iron, instead of running direct from the melting furnace into the mould, must first be run into the converting vessel, where in ten minutes it would become Steel, or malleable Iron, as was desired, and the casting might then take place in the ordinary manner. The small piece of ordnance exhibited served to illustrate this important manufacture; and it was interesting, in consequence of its being the first gun that was ever made in malleable Iron, without a weld or joint. The importance of this fact would be enhanced when it was known that conical masses of this pure tough metal, of from 5 tons to 10 tons in weight, could be produced, at Woolwich, at a cost not exceeding £6 12s. per ton, inclusive of the cost of pig Iron, carriage, remelting, waste in the process, labour, and engine power. The conical ingots being cast in Iron moulds, the great delay in moulding in loam would be avoided, and as the Iron moulds employed might be removed from the casting pit within an hour after the metal had been poured into them, the tedious interval of three days, now required by the cast Iron guns, before removal, would be also avoided, thus immensely increasing the capabilities of the foundry. If it was assumed that these advantages were about equal to the cost of hammering the cast ingot, then by this process it would be practicable to produce guns of any size, in hammered cast Steel, or malleable Iron, ready for the boring mill, at about the same cost as the cast Iron guns now in use ; but if the weight of the guns could be reduced by 20 or 25 per cent., in consequence of their superior strength, then an actual saving in that proportion would be effected in the first cost of every gun so made. These important facts had been laid before the Government, and their advantages were stated to be fully appreciated by Colonel Eardley Wilmot, the superintendent of the Royal Gun Factories, who had evinced a great interest in the progress of the invention from its earliest date, and to whose kindness the author was indebted for the many valuable trials of the tensile strength of the various samples of metal that had been submitted for investigation.

It would be interesting to those who were watching the advancement of the new process, to know that it was already rapidly extending itself over Europe. The firm of Daniel Elfstrand and Co., of Edsken, who were the pioneers in Sweden, had now made several hundred tons of excellent Steel by the Bessemer process. Another large manufactory had since been started in their immediate neighbourhood, and three other companies were also making arrangements to use time process. Time authorities in Sweden had fully investigated the whole process, and had pronounced in favour of it. The large Steel circular saw plate exhibited was made by Mr. Goranson, of Geffie, in Sweden, the ingot being cast direct from time fluid metal within fifteen minutes of its leaving the blast furnace. In France the process had been for some time carried on by the old established firm of James Jackson and Son, at their Steel works near Bordeaux. This firm was about to manufacture puddled Steel on a large scale. They had already got a puddling furnace erected and in active operation, when their attention was directed to the Bessemer process, the apparatus for which was put up at their works last year; and they were now extending their field of operations, by putting up more powerful apparatus at time blast furnaces at the Landes. There were also four other blast furnaces in the South of France in course of erection, for the express purpose of carrying out the new process.

The Irons of Algeria and Saxony had produced Steel of time highest quality.

Belgium was not much behind her neighbours; the process was now being carried into operation at Liege, where excellent Steel had been made from the native coke Iron; while in Sardinia preparations were also being made for working the system. Russia had sent to London an engineer and a professor of chemistry to report on the process, and Professor Muller of Vienna, and M. Dumas and others from Paris, had visited Sweden, to inspect and report on the working of the new system in that country.

The Bessemer process might therefore be now fairly considered an accomplished commercial fact; and in a country like England, where the manufacture of Iron and Steel formed so important a branch of the national industry, and was so necessary an element in all the great manufacturing operations, it must be admitted that an impartial examination of the new system was of the highest importance, not only to those immediately concerned in the production of malleable Iron and Steel, but to the country generally.

That the process admitted of further improvement, and of a vast extension beyond its present limits, the author had no doubt; but those steps in advance would, be imagined, result chiefly from the experience gained in the daily commercial working of the process, and would most probably be the contributions of the many practical men who might be engaged in carrying on the manufacture of Iron and Steel by this system. Hitherto the process had been brought into its present practical and commercial state without recourse to any of the numerous inventions which were supposed by the several authors to be essential to the success of the system; but any real improvement that might be brought forward would be cordially received and encouraged.

Such is a brief outline of the Bessemer Process; and, though like most important and useful inventions, it met at first with the usual amount of ridicule and opposition, yet it may now be considered un fait accompli; and as a natural consequence, great changes are beginning to pervade our Steel and malleable Iron manufactures. Bessemer Steel is found to be the cheapest of all the malleable metals, is the toughest and strongest when made "mild," and admitted to be suitable for constructive purposes. Its use among engineers is steadily increasing, and already the first Cast Steel Bridge is in course of construction on the Thames, the bridge being erected for the convenience of landing steam-boat passengers. In order to enforce the value of his invention, Mr. Bessemer himself became a manufacturer of Steel; he erected suitable furnaces at Sheffield, and the quality of the metal and lowness of its price soon attracted the attention of other manufacturers; now two of the largest Steel houses in Sheffield have put up the requisite machinery for working the new process; it is also being adopted by one of the first Iron-masters in the county of Durham, and several parties are, at the present moment, negotiating with Mr. Bessemer for licenses to be permitted to use his valuable patent.

 

 

Prev Page Return to Top of Page Next Page

Please Note: These web pages retain the original pagination from the publication

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z