Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
Items for sale
Items for Sale
e-Books
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

E-Book Prev Page Return to Index Next Page E-Book
/ Index \

and many valuable facts were elicited. The successful working of some of the higher qualities of pig Iron caused a total change in the process, to which the efforts of Messrs. Bessemer and Longsdon were directed. It was determined to import some of the best Swedish pig Iron, from which Steel of excellent quality was made; and tried for almost all the uses for which Steel of the highest class was employed. It was then decided to discontinue, for a time, all further experiments, and to erect Steel works at Sheffield for the express purpose of fully developing and working the new process commercially, and thus to remove the erroneous impressions so generally entertained in reference to the Bessemer process.

In manufacturing tool Steel of the highest quality, it was found preferable, for several reasons, to use the best Swedish pig Iron, and, when converted into Steel by the Bessemer process, to pour the fluid Steel into water, and afterwards to remelt the shotted metal in a crucible, as at present practised in making blister Steel, whereby the small ingots required for this particular article were more perfectly and more readily made.

It was satisfactory to know that there existed in this country vast, and apparently inexhaustible, beds of the purest ores fitted for the process. Of the hematite alone, 970,000 tons were raised annually, and this quantity might be doubled or trebled, whenever a demand arose. It was from the hematite pig Iron made at the Workington Iron Works, that most of the larger samples of Iron and Steel exhibited were made. About 1 ton 13 cwt. of ore, costing 10s. per ton, would yield 1 ton of pig metal, with 60 per cent. less lime, and 20 per cent, less fuel, than were generally consumed when working inferior ores; while the furnaces using this ore alone yielded from 220 tons to 240 tons per week, instead of, say, 160 tons to 180 tons per week, when working with common ironstone. The Cleator Moor, the Weardale, and the Forest of Dean Iron Works, also produced an excellent metal for this purpose.

The form of converting vessel which had been found most suitable somewhat resembled the glass retort used by chemists for distillation. It was mounted on an axis, and was lined with "Ganister" or road drift, which lasted during the conversion of thirty or forty charges of Steel, and was then quickly and cheaply repaired, or renewed. The vessel was brought into an inclined position, to receive time charge of crude Iron, during which time the tuyeres were above the surface of the metal As soon as the whole charge was run in, the vessel was moved on its axis, so as to bring the tuyeres below the level of the metal, when the process was at once brought into full activity, and twenty small, though powerful, jets of air sprang upwards through the fluid mass; the air, expanding in volume, divided itself into globules, or burst violently upwards, carrying with it a large quantity of the fluid metal, which again fell back into the boiling mass below. The oxygen of the air appeared, in this process, first to produce the combustion of the carbon contained in the Iron, and at the same time to oxidise the silicum, producing silicic acid, which, uniting with the oxide of Iron, obtained by the combustion of a small quantity of metallic Iron, thus produced a fluid silicate of the oxide of Iron, or "cinder" which was retained in time vessel and assisted in purifying the metal. The increase of temperature which the metal underwent, and which seemed so disproportionate to the quantity of carbon and Iron consumed, was doubtless owing to the favourable circumstances under which combustion took place. There was no intercepting material to absorb the heat generated, and to prevent its being taken up by the metal, for heat was evolved at thousands of points, distributed throughout the fluid, and when the metal boiled, the whole mass rose far above its natural level, forming a sort of spongy froth, with an intensely vivid combustion going on in every one of its numberless, ever-changing cavities. Thus by the mere action of the blast, a temperature was attained, in the largest masses of metal, in ten or twelve minutes, that whole days of exposure in the most powerful furnace would fail to produce.

The amount of decarbonisation of the metal was regulated, with great accuracy, by a meter, which indicated on a dial the number of cubic feet of air that had passed through the metal ; so that Steel of any quality, or temper, could be obtained, with the greatest certainty. As soon as the metal had reached time desired point (as indicated by the dial), the workmen moved the vessel, so as to pour out the fluid malleable Iron, or Steel, into a founder's ladle, which was attached to the arm of a hydraulic crane, so as to be brought readily over the moulds. The ladle was provided with a fire-clay plug at the bottom, the raising of which, by a suitable lever, allowed the fluid metal to descend in a clear vertical stream into the moulds. When the first mould was filled, the plug valve was depressed, and the metal was prevented from flowing, until the casting ladle was moved over the next mould, when the raising of the plug allowed this to be filled, in a similar manner, and so on, until all the moulds were filled.

The casting of large masses of a perfectly homogeneous malleable metal into any desired form rendered unnecessary the tedious, expensive, and uncertain operation of welding now employed wherever large masses were required. The extreme toughness and extensibility of the Bessemer Iron was proved by the bending of cold bars of Iron 3 in. square, under the hammer, into a close fold, without the smallest perceptible rupture of the metal at any part ; the bar being extended on the outside of the bend from 12 in. to 16¾ in., and being compressed, on the inside, from 12 in. to 7¼ in., making a difference in length of 9½ in., between what, before bending, were the two parallel sides of a bar 3 in. square. An Iron cable, consisting of four strands of round Iron, 1½ in. diameter, was so closely twisted, while cold, as to cause the strands, at the point of contact, to be permanently embedded into each other. Each of these strands had elongated 12½ in. in a length of 4 ft. and had diminished 1-10th of an inch in diameter, throughout their whole length. There were also exhibited some Steel bars 2 in. square and 2 ft. 6 in. in length, twisted cold into a spiral, the angles of which were about 45 degrees; and some round Steel bars 2 in. diameter, bent cold under the hammer, into the form of an ordinary horse-shoe magnet, the outside of the bend measuring 5 in. more than the inside.

The Steel and Iron boiler plates, left without shearing, and with their ends bent over cold, also afforded ample evidence of the extreme tenacity and toughness of the metal; while the clear, even surface of the railway axle and piece of malleable Iron ordnance, were examples of the perfect freedom from cracks, flaws, or hard veins, which formed so distinguished a characteristic of the new metal. The tensile strength of this metal was not less remarkable, as the several samples of Steel tested in the proving machine, at Woolwich Arsenal, bore, according to the reports of Colonel Eardley Wilmot, R.A., a strain varying from 150,000 lb. to 162,900 lb. on the square inch, and four samples of Iron boiler plate from 68,314 lb. to 73,100 lb. ; while according to the published experiments of Mr. W. Fairbairn, Staffordshire plates bore a mean strain of 45,000 lb.; and Low Moor and Bowling plates a mean of 57,120 lb. per square inch.

There was also another fact of great importance in a commercial point of view, In the manufacture of plates for boilers and for shipbuilding, the cost of production increased considerably with the increase of weight in the plate ; for instance, the Low Moor Iron Company demanded £22 per ton for plates weighing 2½ cwt. each; but if the weight exceeded 5 cwt., then the price rose from £22 to £37 per ton. Now with cast ingots, such as time one exhibited, and from which the sample plates were made, it was less troublesome, less expensive, and less wasteful of material, to make plates weighing from 10 cwt. to 20 cwt., than to produce smaller ones; and indeed there could be but little doubt that large plates would eventually be made in preference, and that those who wanted small plates would have to cut them from time large ones. A moment's reflection would, therefore, show the great economy of the new process in this respect; and when it was remembered that every riveted joint in a plate reduced the ultimate strength of each 100 lb. to 70 lb., the great value of long plates for girders and for ship-building would be fully appreciated.

At a time when the manufacture of ordnance occupied so large a share of public attention, it was interesting briefly to point out the great facility which the Bessemer process afforded of forming masses, both of malleable Iron and of Steel, of a size suitable for the heaviest ordnance, without any welding together of separate slabs, or the more costly mode of building up the gun with pieces accurately turned and fitted together. Many attempts had been made to produce wrought Iron ordnance, and this object had been successfully accomplished in the case of the large gun produced at the Mersey forge. But, however perfect this one gun might be, the time required

 

Prev Page Return to Top of Page Next Page

Please Note: These web pages retain the original pagination from the publication

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z