Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
Items for sale
Items for Sale
e-Books
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

E-Book Prev Page Return to Index Next Page E-Book
/ Index \

the boilers, if the pipes for conveying the steam be of sufficient capacity, and that they are carefully wrapped with some non-conducting material, to prevent condensation.

At St. Helens Auckland Colliery, Durham, steam is conveyed down the pit to a distance of 1,100 yards. It appears that when the pressure in the boilers is 40 lbs. per square inch, the working pressure in the receiver near the cylinders is about 8 to 10 lbs. per square inch, 75 per cent. of the pressure in the boilers being lost in forcing the steam through the pipes, which are only five inches diameter. This engine is placed at the extremity of a plane 1,100 yards in length, descending from the bottom of the pit at an angle of 150, and is used for the purpose of pumping water from the extremity of the plane to the shaft. The cylinder is 32 inches diameter, 4½ feet stroke, working a double-acting force-pump of 9 inches diameter; length of stroke of each pump 24 inches, and working 10½ strokes per minute, and forcing 260.19 gallons of water per minute through pipes 5 inches diameter to the shaft. The engine is worked as a condensing engine. It would appear, from the result of this experiment, that it requires a force of 40 lbs. per square inch to force steam 1,250 yards through a pipe 5 inches diameter, at a rate of 64.5 feet per second, to keep up a regular supply of steam to the cylinders at 8 lbs. pressure per square inch. The engine works equal to 35 horses — the boilers being equal to 78 horses.

I had, says Mr. Wood, an opportunity, a short time ago, of making an experiment on the conveyance of steam in pipes of small diameter. The boilers were placed near the bottom of the pit, and the steam conveyed a distance of 1,012 yards therefrom in pipes of 4 inches diameter. The result was, that though the pressure in the boilers was kept up at 35 lbs. per square inch, the steam did reach the receiver at the end of the drift, but when the engine was put in motion no practical result was obtained, the resistance of the steam when in motion absorbing the entire pressure of 35 lbs. per square inch.

Like all elastic fluids, if we have to convey them to any considerable distance in pipes, the pipes must be of an adequate size to produce a given velocity. An instance of producing power successfully to work cylinders at great distances from the mouth or bottom of the pit, occurs in Scotland. An engine was erected about seven years ago at Govan Colliery, near Glasgow, by Messrs. Randolph, Elliot, & Co. It appears that the Govan Pit is 176 yards deep, the first seam being 92 yards from the surface. In this seam a gallery was driven 706 yards from the shaft, at the end of which it was found necessary to sink a shaft, 26 yards deep, to work another seam of Coal. As a steam boiler was inadmissible at that distance from the shaft, it was proposed to erect a compressing engine on the surface; and to convey air thus compressed to the top of the second shaft, and to erect an engine there, to be worked by such compressed air. The engine has been at work ever since, and so far as the purpose for which it was erected was concerned, it has been quite successful. The subject was treated in detail by Mr. Charles Randolph, of Glasgow, in an able and interesting paper read at the Manchester Institution of Mechanical Engineers, Sept. 1856.

Of the suggestions named, the 4th proposition is considered as the cheapest and most advisable for the conveyance of Coal under ground; that is, the mode of applying a system of engines with double or tail ropes.

Hemp, and Iron and Steel Wire Ropes.

In drawing Coals up the shafts and along incline planes, the use of the best kind of rope is of great importance; the safety of the lives of the workmen depending upon its careful manufacture, quality, and uniformity of strength. The round ropes which were in use in former days were superseded by flat ropes, the chief advantage of which consists in forming a natural counterbalance, by the increase and diminution of the rope roll; the flat hemp rope is now competed with by wire ropes, and to such perfection has the manufacture of round and flat wire ropes arrived, that they are now in use in most of the deepest collieries in the North of England. The cost of ropes formed a serious item; a pair of hemp ropes were often worn out in about six weeks, the cost of baskets and ropes requiring from 4d. to 6d. per ton to uphold them. At Monkwearmouth pit, the weight of a pair of ropes alone was not less than 5¾ tons, and cost £550.

 

TESTS OF HEMP AND PATENT WIRE ROPE,

SHEWING THE COMPARATIVE SIZE AND WEIGHT PER FATHOM FOR EQUAL STRENGTH.

SIZE OF WEIGHT SIZE OF PATENT WEIGHT EQUAL To

HEMP ROPE. PER FATHOM. WIRE ROPE. PER FATHOM A STRAIN OF

Inches Lb. Oz Inches. Lb. Oz. Tons. Cwts.

3 2 4 1 4 2 10

4 3 15 1.5 1 9 3 10

5 6 0 1 14 6 15

6 9 0 2 2 2 8 0

7 12 3 2.25 2 9 8 11

8 14 3 2.5 4 1 9 18

9 19 6 3 5 4 15 6

10 25 0 3.5 7 1 24 6

11 30 0 4 11 6 29 5

12 36 8 4.5 15 2 35 4

 

The wire rope was introduced in the Prussian mines in 1835, and at about the same period in English collieries. At first its use was much objected to by the pitmen ; and the dispute ultimately assumed the form of an assize trial at Durham, July, 1844. The question at issue between the parties was chiefly whether the wire rope used at the Wingate Colliery, Durham, and by which the men were lowered to their work, was fit and proper for that purpose or not. The rope complained of, consisted of 96 wires, and was worked in conjunction with another rope of 144 wires. On account of the giving way of some of the wires of the thinner rope, the workmen refused to descend to their work. It was, however, submitted to a test of ten tons weight, and a portion of it to a strain of upwards of nineteen tons, although the usual weight

 

Prev Page Return to Top of Page Next Page

Please Note: These web pages retain the original pagination from the publication

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z