permanent shaft at that spot. The principal instruments used in all districts by the borer, are :— 1. Bore-rods of best iron, one inch square and of different lengths, each rod having a "male screw" at one end, and a "female screw" at the other. 2. Chisels fitted with screws, well tempered with steel, with a face of 2½ inches, and generally 18 inches in length. 3. A wimble, viz., a hollow iron instrument like an auger, whose cavity is from 6 to 10 inches in length, with an opening up one side, with partial overlap, the better to receive and hold the chopped strata. 4. Exactly over the spot where the boring has to be made, a large frame or triangle, 20 to 30 feet high, is erected.
The lowermost rod in boring is the chisel, which continually operates on the rock or stratum. The uppermost rod terminates in a stout ring, through which passes a cross piece, held by two men in working, and which is also suspended to a springing pole by a chain. One or more rods being pushed into the ground, two men on a wooden stage take hold of a cross stave at the end of the springing pole, and work it steadily up and down; while two men below, by means of the cross piece, at the same time heave and depress the suspended rods, walking slowly round the hole. By these combined operations of chopping and scooping, they make slow way through whatever substance may be in contact with the steel chisel of the lowest rod. When the boring becomes obstructed by matter removed, or when the stratum is to be examined, the rods are drawn out by the tackle at the top of the triangle, and replaced by others. It is remarkable how such simple apparatus, with care and perseverance, will penetrate through the hardest rocks; and practised borers can ascertain with the greatest nicety the nature and thickness of the strata bored through, and can form a very correct opinion as to the nature of the "feeders," or springs of water met with in the process. The task is important; for an erroneous account of the strata might lead to large expenditure and irretrievable disappointment. Borings have frequently been accomplished to the depth of 130 fathoms (780 feet); when so great a depth is contemplated, a small shaft is generally sunk to expedite the process. Holes can be bored upwards with ease, as the hole clears itself of matter. Prudent men do not satisfy themselves with one boring, but by executing a succession of borings to some well ascertained seam, a fair opinion may be formed of the direction and amount of the dip and rise of the Coal, as also of the nature of the roof. Indeed, it is only by multiplied borings that it can be inferred that the principal seams of Coal are parallel to each other, without being upthrown or downcast by faults. Horizontal borings are very useful when miners are suspicious of their approach to old wastes and workings of other mines, where water or destructive gas may be accumulated: this kind of work is carried on by drifts.
The omission of boring where wastes were expected to be found, has often led to most disastrous results; for although in many cases both the Coal and the superior strata are so open that they indicate the vicinity of a "drowned waste" long before the workings are brought in contact with it; yet it is frequently the reverse, in consequence of both Coal and stone being so completely water-tight that they exhibit no symptom of water till the communication actually takes place. In collieries, therefore, lying to the dip of drowned wastes of uncertain form and extent, a good system of boring is most necessary; for when once the waste is proved, the water can be gradually let off to the pumping engines, and an opportunity taken to drain it, and thus procure the Coal which had previously been left as a barrier of safety.
These borings possess great interest to the mining adventurer, to the geologist, and to an enquiring mind. Mr. Williams, an enthusiast in mining science, thus expresses himself on the delights of boring :— "Of all branches of business, of all the experiments that a man of sensibility can be engaged in, or attend to, there is perhaps none so amusing, so engaging and delightful, as a successful trial upon the vestigia, or appearance, of a seam of Coal, or other mineral discoveries. When you are attending the people who are digging down or forward upon the vestige of the Coal, and the indications are increasing and still growing better under your eye, the spirit of curiosity and attention is awakened, and all the powers of expectation are elevated in pleasing hopes of success; and when your wishes are at length actually crowned with success, when you have discovered a good Coal of sufficient thickness, and that all circumstances are favourable, the heart then triumphs in the accomplishment of its wishes — with solid and satisfactory joy. There is more rational delight, more substantial pleasure and happiness to be enjoyed in such scenes as this, than in all the celebrated amusements which luxury invents and pursues."
The subject of boring will be afterwards treated in detail, where the results may be considered interesting or instructive in the descriptions of separate collieries. The ordinary prices, it may be added, charged by established borers, are — For the first five fathoms, 7s. per fathom; for the second five fathoms, 14s. per fathom; for the third five fathoms, 21s. per fathom; and so on, 7s. extra per fathom, for each successive five fathoms.
Winning a Colliery.
The term "Winning" a Colliery, or the Winning of Coal, is in general use amongst those engaged in Coal mines, and comprehends in its meaning, boring for Coal, sinking the shafts, excavations, and the actual procuring of Coal under circumstances favourable to its being worked.
Having ascertained the existence and workable condition of Coal by boring as above described, the next and most important business is that of sinking a shaft or great opening to the mine. Much of the uncertainty and risk formerly attendant upon the winning of a colliery is now obviated by the advances made in geological knowledge and the improvements effected in scientific engineering ; still, the sinking of a shaft is a work of considerable difficulty, danger, and expense.
Sinking the Shaft.
From the large sums mentioned in evidence in Parliamentary Committees, as being expended upon certain shafts in the North of England, an exaggerated notion has prevailed on the subject, insomuch that the exception has been supposed to be nearly the rule. The most expensive of all single shafts is that of Monkwearmouth, near Sunderland, which cost the Messrs. Pemberton upwards of £80,000. A similar most costly sinking was that at Dalton-le-Dale, Durham, undertaken
Please Note: These web pages retain the original pagination from the publication