few years he consumed all his money, and rode home upon his light horse." Lord Keeper Guilford thus describes the waggons introduced by Master Beaumont :— "The manner of the carriage is by laying rails of timber from the colliery down to the river exactly straight and parallel, and bulky carts are made with four rollers fitting these rails, whereby the carriage is so easy that one horse will draw down four or five chaldrons of coals, and is an immense benefit to the coal merchants."
In 1625 a patent was granted by James VI of Scotland, to a Mr. David Ramsay, for the discovery of an engine for raising water from Coal mines. In 1676 Lumley Colliery, as well as the collieries of Hetton, in the county of Durham, and of Jesmond near Newcastle, had chain-pumps worked by water-wheels; and prior to Newcomen's application of the steam engine, about the year 1700, to the drainage of mines, water was raised by engines worked by horses, and the Coal was not only carried along the ordinary roads in carts, but also on the backs of horses. In 1708 wind-mills were erected to work pumps in several collieries in Scotland, but were ineffectual in calm weather. In 1709 John Earl of Mar, who paid great attention to the improvement of his collieries in Clackmannanshire, sent the manager of his works to Newcastle to inspect the machinery of that district. From his report it appears that the machines in use were water-wheels and horse-engines with chain-pumps: the common depth of the pits was from 20 to 30 fathoms, and a few from 50 to 60 fathoms. The expense of sinking these was about £55, and the cost of the machine for drawing the Coals (a horse-gin) £28.
The first steam engine worked in the Northern District was at Oxclose, near Washington; the second at Norwood, near Ravensworth; and the third, in 1713 or 14, at Byker Colliery. About 1720, they appear to have been generally in use; and hundreds have since been erected in this district. The quantity of water drawn off from the mines by their means is almost past belief. Mr. Buddle stated, that in a colliery with which he was connected, they draw eighteen times the weight of water which they did of Coal. By taking the average of 33 engines, it was calculated, in 1815, that for every bushel of Coal consumed, 21,500,000 lbs. of water was raised one foot high.
The sledge, drawn by men or boys, was the first species of machinery employed to convey Coals from the workings; by the previous system, called the bearing system, the Coals were borne upon the backs of women and children, in wicker creels or baskets, a practice peculiar to Scotland, and in use from the earliest Coal workings to the period of Lord Ashley's Bill in 1843. The barrow succeeded the sledge, then the tram with wooden wheels; the next improvement was the introduction of asses and ponies, as applicable to sledges.
The main roads underground up to this period, from the shaft to the workings, were of wood, the wheels of the rollies of cast iron, the rollies carrying two or three corfs or wicker baskets each; the baskets were transferred from the tram to the rolly by means of a crane, and brought to the bottom of the shaft by horses and drivers. The accompanying plate gives a correct view of the underground operation.
The first railways with wooden rails and sleepers were introduced in the North of England between 1632 and 1649, though they were not in general use until 1670 or 1680. The cost of the wooden rails, known in other parts of the kingdom as "Newcastle Roads," did not exceed from £400 to £600 per mile. — (T. J. Taylor.) The invention of cast iron tramways is due to Mr. Curr, Sheffield; he first introduced them about the year 1777, in the form which is known as the plate rail; but ten years previous to this time, he adopted at Colebrook Dale, cast iron rails for wagon-ways; Mr. Curr also adopted the mode of bringing the Coals from the face of the works to the day in the same carriage, guided in the shaft by conductors. After the use of cast iron, and malleable iron wagon-ways, the horse-sledges were abolished at pit-heaps, the platforms of which were elevated, and trains and tramways substituted. Some of the Coal keels were fitted up with tubs, instead of the Coals lying in bulk, and machinery was introduced for lowering the wagons to the deck of the vessel, as well as to hoist them out of the keel on ship-board. Underground engines were used both for the forcing of water by means of cranks and pumps, and also for the drawing of Coals up inclined planes. For drawing Coals up the shafts, hand windlasses or jack-rolls were the first species of machinery employed; these were succeeded by horse-gins, which soon afterwards were improved from the rude cog and rung gin. The water-wheel was made use of by the introduction of Newcomen's engine; at length the steam engine was applied; and among other improvements were guides and cages, tub carriages, the Coal screen, and the important introduction of gunpowder for blasting the Coal instead of the hitherto laborious application of the maul and wedge. — Descriptions of the Coal Cutting Machine, Safety Lamp, &c., will be given under their proper heads.
The use of the steam engine in drawing Coals, it may be observed, became general at a later period than its employment for pumping water; and one of the earliest applications of the locomotive engine was for the purpose of leading Coals. It was first shown on the Wylam Colliery Railway, near Newcastle, that locomotion was practicable by the adhesion of the wheels to the rails, a doubt on this point being considered in the invention of Trevithick and Vivian the chief difficulty in the way of establishing locomotion successfully. Mr. George Stephenson's engine was constructed in 1814, for the Killingworth Colliery Railway, Northumberland, and with the Wylam engine, may be regarded as constituting the commencement of that modern railway system which has been developed in so extraordinary and rapid a manner. — Malleable iron rails were partially laid down on the Walbottle Colliery Railway, near Newcastle, as early as 1794; in 1808 they were used at the Earl of Carlisle's Colliery, at Tindale Fell; but as late as 1818 they are spoken of as a novelty; and their first employment on a large scale may be regarded as that of the Stockton and Darlington Railway, opened in 1825.
Boring for Coal.
In describing the Coal-basins, it was shown that in only some few instances Coal was exposed to the surface, though we had a general knowledge of the extent of its existence; previous, therefore, to incurring the great expense of sinking a shaft, recourse is had to boring in order to ascertain the depth and position of the main seams. A certain spot is fixed upon as likely to afford the best indication of the different substances from the surface to any given depth, and the exact thickness of each stratum at a fair place of boring. Thus it can be ascertained whether the strata correspond with the registers of other previous borings, and whether the Coal lies at such a depth, and in such seams as will warrant the sinking of a
Please Note: These web pages retain the original pagination from the publication