II. — Description Of The Workings In The Vicinity Of The Accident.
The East Pit of Birley Colliery is situate about 4½ miles from the Town Hall of Sheffield and half a mile south of the village of Woodhouse and is owned by Messrs. The Sheffield Coal Company, Limited. The seam worked is the Parkgate, 4½ feet thick with a strong sandstone roof, and it was in the 320's level section of the No. 4 district of this seam that the accident occurred. The system of working is generally by pillar and stall, but in the No. 4 district the seam was being worked by the longwall method with stepped faces advancing to the full rise, namely, 1 in 10. See Plate 1. In the 320's level section there were eight stalls with gateroads 35 to 40 yards apart. As the face is advanced the roof in the gateroads is blasted down to make height, the average thickness of the ripping being 3½ feet. All timber is withdrawn from the wastes, and the roof breaks off close up to the props set along the working face causing numerous and well defined breaks across the gateroads more or less parallel to the working face.
Ventilation of 320's level section. — The coursing of the air to ventilate the section is shown on Plate 1. The quantity of air entering the district from the Beighton Plane was 2,240 cubic feet per minute; it was conducted into the face of the level by means of double sheets hung near the foot of each of the gateroads and it was there joined by another current, measuring 2,960 cubic feet per minute; the two then swept along the working face to the return airway.
Flame Safety Lamps of the Protector type were in use throughout the seam.
A copy of this report was kindly donated by
West Cumbria Mines Research.