|
At Bowhill Colliery, Fife, an electrically driven coal cutting machine had become fast between the floor and the roof of the seam. The machinemen tried unsuccessfully for several hours to liberate it. The deceased, although not authorised to work a coal cutter, continued work on the instructions of the fireman. After cutting down some roof and getting up some floor he started up the machine and was electrocuted. The machine had been grossly overloaded and it is possible that a flash spread from the switch contacts to the casing and so caused the machine to become alive. Two witnesses said they saw a flash from the switch box. Source: 1924 Mines Inspectors Report, Scotland Division (No. 1) by J. Masterton, H.M. Inspector of Mines [DMM Ref: L-01624 - Tom Bainbridge Collection], Page: 27
|
|||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 14 Mar 2023
|
Search |
|
|||