|
Ironstone Mining Accidents. No. 5 accident. — Falling down a shaft through the rope breaking. The engine draws stone from several shafts. The deceased was descending one of the shafts when a "cap" at a splicing in the rope caught between a guide roller and the frame and stuck there a short time ; before the engineman could reverse the engine, the "cap" slipped, and the cage dropped the length of slack rope down the shaft, broke the rope, and the deceased was precipitated to the bottom. It is a common practice to draw from several shafts with one engine in the plan of working this stone (the same as where No. 3 accident occurred). The coal having been got from under the stone, the strata is tender, and a road is only maintained between two shafts. It is desirable that the whole of the shafts communicate underground, and that persons be lowered and raised at one shaft only. The engineman's attention could then be fixed on one shaft when lowering or raising persons. Source: 1861 Mines Inspectors Report, by John Hedley, H.M. Inspector of Mines, Page: 61
|
|||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||