Museum Entrance Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Disaster Report Text
Disaster Report Name Index
UK Disaster Report Text
UK Disaster Report Name Index
Inquest Texts
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

  Disasters - Names Return to Index Disasters - Names  
Date:  8th August 1860
Colliery:  Lugar
Company:  William Baird and Co.
Cause:  Fell from a mid-working
Lives Lost:  1
Category:  

Description

No. 26 accident, in a shaft at a "mid-working."

This pit, wholly sunk for ironstone, is 124 fathoms deep. A seam of coal is partially worked at 54 fathoms above it, or 70 fathoms from the surface.

The excavations in it are very limited, a few tons being worked daily for the use of the engine.

The shaft being sunk principally for ironstone, it was only when coal was required to be raised that the cage was rested at the level of the coal, and there was a signal hammer by which the workmen could communicate with the engineman.

The deceased and his neighbour were the only workmen engaged in the coal on the day of the accident, and it would appear that they had been both at the landing from which the coal is raised when the cage was rested. The survivor drew off the empty hutch, and the deceased a few moments after had gone forward with a full one to place it on the cage. During this short time the engineman, without any signal, had raised the cage, so that the deceased in pushing the full hutch in to where the cage should have been, fell down the open shaft with it, a distance of 324 feet.

In this case it does not appear that any signal had been made when the cage was raised. The machinery was of the usual description, and under the control of the engineman. I am therefore of opinion that the accident was occasioned by the neglect of the engineman in either raising the cage or injudiciously allowing the engine to reverse.

The proper way to conduct a "mid-working" such as the present, is either to set apart so much time during each day for drawing the materials from it, taking care that a moveable scaffold is placed over the pit at that time, or to fix a scaffold on one side of the shaft at the required level, and provide a "tow" for the direct use of the workmen there engaged.

Source: 1860 Mines Inspectors Report, by William Alexander, H.M. Inspector of Mines, Page: 141


Fatalities



Individual page Carlan, John, aged 40, Collier, Fell from a mid-working
 
All names found
 

Those names marked with image, have a web page providing individual details of the accident, the page may also include a photograph of the deceased. Click on the image symbol next to the name to see the web page.

 

Return Return   Return to Top Return to Top

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 30 Apr 2023

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print