|
Volume 36 (XXXVI), 1886-1887, published 1887 The Chairman said they would be glad to hear any remarks upon the paper. Professor Merivale said, he would like to ask one or two questions, but he did not propose to make any remarks upon the paper. How did Mr. Steavenson get the water back when working to the dip? How many pounds of powder did he use to the ton of ironstone? Was it of very great importance to get large pieces of ironstone as in the case of coal? And how did Mr. Steavenson measure the water used? Mr. Steavenson said, that with respect to getting the water from the dip, he would simply run the water back to the bottom of the pit in a pipe. He thought he had already stated that about 6 ozs. of powder ~~~~ Brothers' mines alone somewhere about a ton of powder was used every day when in full work. Large blocks were no benefit, but rather a drawback; for these had to be reduced to the size suitable for calcining. He had tested the mode of measuring water over a weir or notch, and with a box, and his experience certainly was that, in measuring water over a notch, a less quantity was given than was obtained by actual measurement with a cistern. Mr. T. W. Benson asked whether this mode of working a drill would be any advantage in driving a stone drift in hard rock; or whether Mr. Steavenson considered it would be necessary to use a percussive drill for this class of rock? Mr. Steavenson said he had already stated that rotatory drills were not suited for any hard stone; but it would not be a difficult matter to alter the movement from the rotative to the percussive action, or a small diamond drill could be substituted for the auger. He believed a percussive action was absolutely necessary for a hard stone. Mr. C. Z. Bunning asked Mr. Steavenson if he had had any experience with the Brandt drill? It is a rotatory hydraulic drill, and was used in boring the Arlberg tunnel in Germany, and did exceedingly good work. Mr. Steavenson stated that although he had used a great many drills, both revolving and jumping, he had not to his knowledge had any experience with the German one spoken of. His experience conclusively pointed out that a jumping drill was absolutely necessary for hard stone, except with the Diamond drill. The Chairman said he had not only the duty, but the great pleasure of proposing a vote of thanks to Mr. Steavenson for his paper. Mr. J. B. Simpson seconded the vote of thanks, and it was unanimously agreed to.
|
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||