|
14th October 1976 Ore Miner Was In Wrong Place Inquest ToldA Beckermet iron ore miner who died after being crushed against a loading machine by a rock fall, should not have been where he was a Whitehaven inquest heard yesterday afternoon. Alfredo Perencin (46), of Clayton Avenue, Cleator Moor, should have been in a protected part of the mine using remote control to operate the machine. Instead, he was operating it manually from a small footplate on its side when the accident happened. Romeo Basso of Melbreak Avenue, Cleator Moor, who was working with Mr. Perencin, told the jury that they had filled the loader twice using the manual controls. They had tried the automatic ones but the loader would not steer, he claimed. The tragedy occurred on the third loading when Mr. Perencin had driven the machine sideways into a robbery and was standing opposite a fault. Four tons of rock fell from the walls and rolled down to crush him against the machine. Overman's Evidence Bruno Sebastiani of Birks Road, Cleator Moor, an overman at the mine, said the man had instructions to use the loaders only by remote control unless they were working in a protected (roof propped up with pit props) part of the mine. If any faults developed with the machine, these had to be reported to the fitters and then left. Gordon Richards, of The Crescent, Thornhill, a senior fitter at the mine, stated that the machine, which had been converted to remote control only a week before, had been checked the day before the accident, when "everything was satisfactory." After the accident, he checked the vehicle again and found it in perfect working order.
Newspaper transcript kindly provided by
|
|||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||