February 1970, Page: 4
Steel 'nose' to beat pit dust
A super-sensitive steel "nose" — that is the new gravimetric
dust sampler designed by Coal Board scientists and being tried in mining
countries throughout the world.
So impressed are the Americans that this efficient instrument that looks like a
housewife's iron is named in their new mining legislation — the Federal
Coal Mines Health and Safety Act of 1969 — as the standard equipment for
dust sampling.
It sniffs in the dust a pitman would breathe to give an accurate picture of
conditions near the coal face or in a heading — and the diagram (below)
shows how It works, from the inside.
Weight is vital
Said Mr. Bob Hamilton, head of the NCB's dust group at Mining Research and
Development Establishment, Bretby, Staffordshire, who worked on the sampler
from the start: "We wanted something more precise than the existing
equipment, the thermal precipitator."
Motor
"First of all it meant finding a motor which could not cause a dangerous
spark but could drive a pump to draw a thousand times as much air through as
the previous sampler to get a weighable amount of dust. We found that a motor
similar to those in tape recorders or record players does the job well."
Other problems were overcome by using a glass fibre filter, like a paper disc,
which is not affected by moisture as the air is drawn through and the dust
collects on it, and designing a tiny pump to draw the air out at a constant
flow despite resistance building up through dust on the filters.
Trials
The amount of air passed through is recorded so the dust content can be worked
out afterwards at Area laboratories.
The "nose" has had extensive and successful pit trials, and since the
first ten were made by the NCB, the scientific instrument firm C. F. Casella
and Company have been the manufacturers.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Hamilton, Bob | | | |