Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Articles by date
Articles by colliery
Personal name index
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious


 Newspaper Articles Index Newspaper Articles 

21st November 1944, Page: 5343

Official Notice

Whitehall, November 9, 1944.

The King has been pleased to award the Edward Medal to Frank Emery Nix in recognition of his gallantry in the following circumstances :—

On the 18th April at 4.30 a.m. a "Bump" occurred at the coal face on which Mr. Ernest Vickers and a workmate were cutting coal with a compressed air machine, as a result of which the flamper over the bars from the left side end of the machine was broken for a distance of 35 yards, the roof lowering about 8 inches. The bar over Mr. Vickers lowered under the weight of the flamper and pinned his head against the edge of the conveyor pans. Mr. Vickers shouted and signalled by knocking on the pans, and his workmate stopped the machine, and, as he was unable to pass the machine to go to Mr. Vickers' assistance, shouted to Mr. Nix and then went round the roadways about 2,500 yards with another man to give what help he could.

Mr. Nix had three men with him behind the machine, two of whom slid down the pans and placed a prop in order to take the weight off Mr. Vickers' head. Mr. Nix followed them down but, seeing that nearly all the props within ten yards of the accident were broken, sent them back and himself went along to where Mr. Vickers was trapped. With the aid of the third man Mr. Nix worked his way down the face side, resetting broken props as necessary. By this time the roof had lowered to about 15 inches from the floor, and this was consequently a most difficult job. The setting of about 12 props brought Mr. Nix to a position about three yards from Mr. Vickers, but owing to the fall of earth he was unable to see him. He went back to the machine to ascertain the position and then returned and began to clear away the earth with the assistance of one of the men. After Mr. Vickers was exposed, it became obvious that the only way to liberate him without a further fall was to lighten the bar, and this he did by breaking the flamper with a hammer, working most carefully for fear of a further fall which would have involved not only Mr. Vickers and himself but two of the other men as well. When the bar was sufficiently uncovered, Mr. Nix sawed off the end and liberated Mr. Vickers, who fortunately was suffering only from severe shock and bruises.

The whole operation took about two hours during which Mr. Nix was working in a height of about 15 inches under a broken and detached roof, the confined space offering little chance if a further fall had occurred.


Names mentioned in this article

 

 Name  Age  Occupation  Notes 
Nix, Frank Emery    Miner  
Vickers, Ernest    Miner  


 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 28 Nov 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print