12th June 1943, Page: 294, Column: 1
Blasting Points
Members of the Manchester Geological and Mining Society have been, discussing a paper by Dr. H. Stafford, M.Sc., on "The Efficiency of Blasting." Among the points to which Mr. F. Ivor Davies directed attention were : Undetonated
explosives found after shot-firing emphasise the need for using up explosives stocks in proper rotation, according to their age or date of manufacture.
Cleaning out shotholes in order to avoid drilling dust getting between cartridges is important although, admittedly, where modern mechanical drills are installed, only small quantities of dust are left in the boreholes.
The need for a satisfactory quality of stemming is recognised, but little guidance has been given as to the quantity required. Sometimes in practice there is a tendency to use too short a length of stemming.
For coal shots where the most suitable types of stemming material are being used, 18 inches of stemming should be regarded as the minimum length ; with inferior material the figure for the minimum length should be increased accordingly.
The importance of various factors, such as the cleaning of the undercut, correct spragging, placing and depth of the shot-holes, can not be stressed too strongly. Attention to those points is just as important as the selection of the most appropriate
explosive.
Efficient roof control would probably be more necessary where power loading was adopted, and in some cases modified methods of control would be necessary to prevent roof troubles which might be associated with the longer continuous lengths of roof left
unsupported over shot coal in front of loading machines.
Delayed-action detonators have been used for some years for tunnelling rounds in metal mines, non-gassy coal mines, etc., and are now being modified so that they may be used in safety lamp mines.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Davies, F. Ivor | | | |
| Stafford, H., Dr. | | | |