29th May 1943, Page: 279, Column: 2
A Semi-Caving Experiment
In a paper before the North Staffordshire branch of the National Association of Colliery Managers on "Working the Rough Sevenfeet Seam," Mr. J. T. Seabridge said the seam has been worked extensively in conjunction with the Hams coal over
a long period on a modified pillar and stall method. Headings were driven in the Hams coal to a predetermined boundary where they are connected up to form a pillar of work retreating from the barrier. This is arranged to be the highest level in the area,
the object being to allow the goaves to charge with firedamp to reduce the liability to spontaneous combustion to which these seams are particularly prone. This state of affairs is, however, rarely achieved in actual practice.
In the last eight years the practice has been to lay out an area for extraction by longwall faces with conveyors and coal-cutters. It was believed that if complete extraction could be attained, except for large and substantial pillars, the liability to
heating would be lessened if not eliminated entirely.
In his paper Mr. Seabridge described the methods and experiments with the results secured, leading up to the decision, on the experience gained with the use of hardwood chocks on the longwall advancing panel, to initiate a system of semi-caving on
the retreating panel, which produced hoped-for results, roof control being certain at all times. Throughout the extraction of this panel no roof control trouble has been met with, roof conditions at all times being ideal. Broken timber has been a very
uncommon occurrence, and a pleasing feature has been the reduction in the number of accidents at the face. In his concluding notes the Author said:—
"The convergence opposite wastes and packs has been reduced. Last, but not least, the face has been stripped regularly without any unpleasant incidents occurring, with a net result of an average output of 1,100 tons per week from the face, which is
70 yards in length. There are one or two points the writer would like to stress in connection with the introduction of this method, lest there should be any misapprehension about motives.
"(1) Economics did not prompt the experiment.
"(2) The consideration that by dispensing with packs, workers would be released for productive work, was never discussed, if it has released men, it is in the nature of an added benefit to those advantages already mentioned. The primary and most
essential motive was that of roof control, and it was correctly assumed if these desirable features could be obtained, other advantages would naturally follow and such has been conclusively proved.
"Whilst the writer is prepared to defend this method in this particular instance, and to favour its adoption for similar conditions, one cannot be dogmatic and suggest that 'caving' or 'semi-caving' is the 'be-all' and 'end-all' of all roof control
problems. This is not the case. One has to preserve an open mind in this matter. On the other hand, it would be just as great a mistake to stipulate that solid or strip packing would solve all roof control problems. One has to maintain a flexible mind
and deal with each particular case on its merits."
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Seabridge, J. T. | | Colliery Manager | |