12th December 1942, Page: 137, Column: 2
Explosives And Blasting
By W. B. Paton.
Extracts from 'Safety Sermonette,' with acknowledgment to the Canadian mining
Journal.
Apart from its "heart-rending" effects on the careless or the unwary
miner, nitro-glycerine, the chief constituent of our mining explosives, has two
other reactions of a more subtle, though less injurious, nature. The commoner
of these reactions is the so-called "powder headache."
Many cures for the headaches have been prescribed, but experience has proved
that what eases one headache intensifies another. Fresh air is the only partial
remedy which is common to all, but relief has been claimed from washing exposed
parts of the skin with a sodium sulphide solution and from the drinking of
strong black coffee. It would appear that prophylactic measures are generally
effective in offsetting the depressing condition. If explosives must be handled
with the bare hands, the hands and face should be washed frequently during the
shift. But even clothes become saturated when in contact with nitro-glycerine,
and skin absorption thus continues unless the clothes, too, are washed
periodically.
Another peculiar reaction of nitro-glycerine on the human body has been called
"powder rash" or "nitro-glycerine eczema." This is an
unusual form of dermatitis which is fortunately comparatively rare. The skins
of certain workmen seem to be particularly susceptible to certain chemical
substances like cyanide, picric acid, nitro-glycerine, etc., and there seems to
be little that the industrial doctor or the management can do about it, except
have the allergic persons removed to other suitable work.
Probably most of the blasting fatalities in Canadian mines are caused by
drilling into miss-fires. "Drilling into miss-fire" is usually the
outcome of conditions remaining from the blasting of the previous round.
Theoretically the checking of the number of blast reports with the number of
holes loaded and spit should give us definite information whether any
miss-fires have occurred, but in practical mining two conditions may make such
a check unreliable. In the first instance it is Canadian custom to do all major
blasting at the end of the shift. Consequently every working place in a section
may be blasting at the same time, while the miners of the section are on their
way to the shaft station. Again, even if each working place was blasted singly,
it is more than possible that two or more shots could explode simultaneously.
Normally the best indication of a miss-fire, which is not glaringly obvious, is
the contour of the face which has been blasted. The miss-lifter will leave a
hump on the floor and the missed back-hole will likewise leave a belly on the
back; But even the contour may be misleading, for a missed helper, a missed
breast hole, or even a missed "cut" hole may be cut off by the action
of the surrounding holes to leave an unexploded charge in a
"bootleg."
Ordinarily the "bootleg" containing part of an unexploded charge
should give no trouble, yet two of the worst dangers in the miss-fire field are
present here. If the ground is anything but soft there is constant temptation
to deepen the "bootleg" ; and if the ground is soft there is more
than a remote chance that the "bootleg," with its potent contents,
will be obliterated beyond the point of even careful scrutiny. The former
practice is a contravention to the Canadian Mining Regulations and punishable
as such, but new miners in particular should be warned of this, as they should
similarly be warned of the awful danger of even a coating of unexploded powder
in the back of the hole.
With regard to the obliteration danger of live cut-offs, washing the face is
often of little or no value. If the " burn cut " is used it is safe
practice to alternate the "cut," and if the working place is double
shifted a definite understanding should be made between the respective shifts.
Where the slightest suspicion of a plugged or plastered cut-off exists in any
part of the face, a commonsense policy is to double the Regulation requirement
for drilling near miss-holes and drill at least one foot from the suspected
cut-off.
In general it may be assumed that a large number of blasting accidents are the
bitter fruits of wilful negligence, stupid chance or conscious violation of the
law. A constant and vigorous educational programme in safety in indicated, but
particular tuition in safe blasting methods is essential.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Paton, W. B. | | | |