25th July 1942, Page: 17, Column: 2
Strip Mining
The tonnage of outcrop coal won in Yorkshire is steadily increasing. Included
in the fifteen or more sites are the operations at Bullcliffe, near Wakefield,
Wentworth, Temple Newsam and Manston, and altogether prospecting in the West
Riding is in an advanced state at twenty-five sites. Several hundreds of tons
of coal are being lifted daily on some of the strip mining sites, and it is
stated that the coal produced, if carefully handled, is good for Lancashire
boilers, power stations, water tube boilers and similar installations.
The production of coal from strip mines constitutes an important percentage of
the total output in some of the States in U.S.A. Giving in brief the history of
stripping coal Mr. Albert L. Toenges, in Bureau of Mines Report of
Investigations 3440, recalls that in the early days, at places where the coal
beds outcropped or lay at shallow depths, the overburden was removed by teams
and scrapers, and the coal was loaded by hand into barrows or wagons. It was
impractical to mine the coal by underground methods because of the weak
overlying strata.
In recent years there have been rapid improvements in both equipment and
operating technique, and to-day stripping shovels with a dipper capacity of
thirty-two cubic yards and coal-loading shovels with a dipper capacity of seven
cubic yards are in use. Stripping methods have resulted in the revival of the
mining industry in some areas, and coal that otherwise would have been lost is
now being recovered. Thin beds of coal, 14 to 24 inches thick, are being mined
successfully by strip-mining methods. It is doubtful whether physical and
economic conditions would ever be such that these beds could be mined by any
other method. Strip mining is mechanised mining, and the rapid growth of the
stripping industry has been due largely to the perseverance and foresight of
the operators and the ability of the manufacturers to meet the demands of
operators for equipment suited to their needs. Nearly all large strip mines are
electrically equipped.
As Mr. Toenges explains, the stripping shovel, when uncovering the coal,
deposits the overburden in more or less parallel ridges. The height of these
ridges varies with the amount of material deposited, which depends upon the
thickness of the overburden. Narrow valleys are formed between the ridges, and
the depths of these valleys range from 10 to 20 feet. The width of the final
cut in an area after all mineable coal has been removed varies with the depth
from the surface of the coal. This open-cut usually fills with water after the
mining equipment has been removed.
The object of Report of Investigations 3440 was to discuss the
"Reclamation of Stripped Coal Land." In the mined-out areas the
reclaimed land may be put to four general uses : (1) Agriculture, (2) grazing,
(3) forests, and (4) recreational parks.
 |
 |
|
Names mentioned in this article
|
 |
 |
| Name | Age | Occupation | Notes |
| Toenges, Albert L. | | | |