|
2nd May 1942, Page: 299, Column: 1 Production Of Carbon Monoxide In Compressed Air RangesAt the April meeting of the North of England Institute of Mining and Mechanical Engineers Mr. W. B. Brown, H.M. Inspector of Mines, read a paper in which he gave the circumstances attending the production of carbon monoxide, including three occurrences last year in the county of Durham. In a summary he said that in view of the unusual but by no means rare cases of noxious fumes being created and propagated to confined spaces underground, thereby introducing a very insidious danger which may not be realised until too late, the following precautions seem to be indicated :— (i) There should be continuous and efficient supervision at all compressors whether placed above or below ground. (ii) Temperatures should be systematically taken and recorded. (iii) Only a high-grade lubricant should be used. (iv) The oil supplied should be periodically tested and close flash-point determined. (v) Fusible plugs, with a fusing temperature below the flashpoint of the oil, should be inserted in the delivery range. Experts are not in agreement as to the ideal point for the insertion of the plug, some preferring it hard up against the receiver and others near the compressor. In nearly all the cases reviewed since the introduction of fusible plugs, the plug has been inserted in the bottom of the pipe so that any oily matter would be ejected in the event of the plug fusing. (vi) To counteract an emission of flame when the plug fuses, the plug should be shrouded in a pipe conveying the fumes outside the building in the case of a surface compressor, and direct into the return in the case of an underground compressor. (vii) A spare intercooler should be provided to facilitate the removal and cleaning of the one in use at regular intervals. (viii) Adequate through ventilation should be provided at all times where a compressed-air driven pump is installed. (ix) Fire fighting equipment should be readily available at all generating plants. (x) In the case of fusible plugs fitted to steam-boilers, it is known that the fusible metal deteriorates. The behaviour of the fusible metal in plugs fitted to air-receivers does not appear to be so definitely known. A useful field for research is suggested ; meanwhile the changing of fusible plugs at regular intervals, when the receiver is cleaned, should not be overlooked.
|
|||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||