|
7th February 1942, Page: 230, Column: 1 Signalling On Haulage RoadsA paper on "Rationalisation of Colliery Electrical Equipment" has been read by Mr. J. A. B. Horsley, O.B.E., before the Institution of Electrical Engineers. Under the sub-head signalling it was remarked that signalling on haulage roads by means of electric bells supplied with current from primary batteries is probably coeval with the use of electric power for working the haulages. Trembler bells are universal and since 1913, or thereabouts, the design has generally included a spark-suppressing device, consisting of a non-inductive shunt, a closed-circuit insulated winding or a copper sleeve. On long roads a relay is used to counteract voltage drop in the line which, with rare exceptions, is constructed of bare galvanised iron wire. The voltage used for signalling is limited by law to 25 volts, and for many years signalling bells and relays have been tested and certified as safe for use in firedamp, at first by the Home Office and since 1921 by the Mines Department of H.M. Board of Trade. Nevertheless, it was pointed out, there would seem to have been no attempt to standardise the resistance of such bells and relays, to say nothing of the variety in the spark-suppressing devices. Bells, the products of nine manufacturers, are to be found in variety, with values of resistance ranging from 10 to 80 ohms, with intermediate values, neglecting fractional values, of 20, 25, 30, 60 and 60 ohms. Similarly, relays by seven manufacturers are to be found with values of resistance ranging from 20 to 500 ohms, with intermediate values of 50, 100, 200, 250 and 300 ohms. All of these bells and relays are required to be safe when tested at 25 volts, and the range of resistance values is doubtless dictated by the user who wishes to use some lower voltage. It should be possible to agree upon one value of resistance for all relays and upon two values of resistance at the most for bells, whereby substantial reduction in variety could be secured. It should be possible also to decide that one or other of the" 3 types of spark-suppressing device has the advantage on balance and to limit manufacture to that device.
|
|||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 28 Nov 2022
|
Search |
|
|||